QMark LFK151F,LFK204F,LFK303F,LFK304F,LFK306F,LFK403F,LFK404F,LFK406F,LFK408F,LFK483F,LFK484F,LFK486F,LFK4083F,LFK487F,LFK488F,LFK4883F Submittal

PRODUCT SUBMITTAL SHEET

Capacities

1500, 2000, 3000, 3600

120, 208, 240, 277, 347 or 600V @ 1Ø or 3Ø

Thermostat Range: 40° - 90° F
Air Movement: 100 CFM

Job Name: _________________________________________________________________

Location: __________________________________________________________________

Architect: __________________________________________________________________

Engineer: __________________________________________________________________

Contractor: ________________________________________________________________

Submitted By: ______________________________________________________________

Date: _____________________________________________________________________

Item QTY

Number

Catalog

4000 or 4800 Watts

Tag Watts Volts PH AMPS Weight

LFK SERIES

FANFORCED WALL HEATERS

Submitted By: Date:

Approved By: Date:

ACCESSORIES

Item QTY

Number

470 Beauty Spot Road East
Bennettsville, South Carolina 29512
www.marleymep.com

Part

Tag

ZSS-QLFKO | 9-2014

Catalog Number Volts Amps Watts Phase BTU/HR

LFK151F

LFK204F

LFK303F

LFK304F

LFK306F

LFK403F

LFK404F

LFK406F

LFK408F

LFK483F

LFK484F

LFK486F

LFK4083F

LFK487F

LFK488F

LFK4883F

120

240/208

347

240

600

347

240/208

600

208

347

240/208

600

208

277/240

208

208

12.5

8.3/7.2

8.6

12.5

5.0

11.5

16.7/14.4

6.7

19.2

13.8

20/17.3

8.0

11.1

17.3/15

23.1

13.3

1500

2000/1500

3000

3000

3000

4000

4000/3000

4000

4000

4800

4800/3600

4800

4000

4800/3600

4800

4800

1

1

1

1

1

1

1

1

1

1

1

1

3

1

1

3

1705

6820/1705

10,230

10,230

10,230

13,640

13,640/10,230

13,640

13,640

16,638

16,638/12,276

16,638

13,640

16,638/12,276

16,638

16,638

Accessories

LFKSM Surface mounting frame for surface installations. 3-13/16” deep

LFKS1 1” deep sur face mounting frame for semi-recessed installation

LFKS2 2” deep sur face mounting frame for semi-recessed installation

LFKSFC 14 gauge security front cover

14-5/16”
(364mm)

15-3/4”

(400mm)

19-5/16”
(490mm)

1-1/4” (32 mm)

18-1/4”

(490mm)

3-7/8”

(99mm)

ARCHITECT’S AND ENGINEER’S SPECIFICATIONS*

The heating equipment shall include an electric automatic
fan forced air heater suitable for small area heating, as
manufactured by QMark®, a Marley Engineered Products®
Brand, Bennettsville, SC. The heater shall be designed for wall
mounting, recess or surface. Heaters shall be cETLus listed.

BACK BOX: The back box shall be designed as a recessed
rough-in box in either masonry or frame installations and is
also used when surface mounting frames are used in surface
mounting installations. The back box shall be heavy gauge
galvanized steel and shall contain knockouts through which
power leads enter.

INNER FRAME ASSEMBLY: The heater assembly, which ts
into the back box, shall consist of a heavy gauge steel fan
panel to which all of the operational parts of the heater are
mounted. The inner frame assembly shall be completely pre­wired.

HEATING ELEMENT: The heating element shall be of the
non-glowing design consisting of an 80/20 nickel-chromium
resistance wire enclosed in a steel sheath to which plate ns
are copper brazed. The element shall cover the entire air
discharge area to ensure uniform heating of all discharged air.
It shall be warrantied for 5 years.

MOTOR AND CONTROLS: The fan motor shall be totally
enclosed, impedance protected, permanently lubricated and
with a totally enclosed rotor. Fan control shall be of the bi­metallic, snap-action type and shall activate fan after heating
element reaches operating temperature, and continue to
operate the fan after the thermostat is satised and until
all heated air has been discharged. The thermostat shall be
single-pole type on all models. Thermal cutout shall be bi­metallic, snap-action type designed to shut o heat in the
event of overheating. The fan shall be ve-bladed aluminum.

SURFACE MOUNTING FRAME: The surface mounting frame
shall be of heavy gauge steel designed to mount around the
back box for a nished surface installation. Slot knock outs
shall be provided for power supply conduit.

FRONT COVER: The louvered front cover shall be of heavy
gauge steel with a powder paint nish. A plug button will be
provided to replace the thermostat knob and render the unit
tamper-resistant.

FINISH: All sheet metal parts, except the galvanized steel
back box, shall be phosphatized, then completely painted by a
powder paint process.

*In the interest of continual improvements in product and performance,

Marley Engineered Products reserves the right to change specications

without notice.

ZSS-QLFKO | 9-2014