Qmark I SERIES User Manual
READ AND SAVE THESE INSTRUCTIONS
ROLLAIRE FAN
READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Your High Velocity Air Circulator has been designed and manufactured using the latest in technology. With normal
care and use, it should provide many years of satisfactory performance. As with all small appliances, it is recommended that you note the following:
• ALWAYS unplug unit for cleaning.
• ALWAYS unplug unit when not in use.
• ALWAYS unplug when moving the fan from one location to the next.
• DO NOT place foreign objects through guard into blade
• DO NOT allow to become wet or damp.
• WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid state speed control
device.
OPERATING INSTRUCTIONS
This high quality fan features a three (3) speed air flow selector switch, which allows you to select desired amount of
air and velocity.
Marley Engineered Products air circulators can be used alone or in conjunction with an air conditioning unit circulate
the cooled air or to force it into other rooms.
In the evening, a Marley Engineered Products Air Circulator will exhaust the stale, hot air and pull the fresh, cool night
air in whenever other windows are open.
NOTE: Because the high velocity are flow draws in air from the sides of the air stream, Marley Engineered Products
Air Circulators exhaust much more air when placed one foot back from a window.
Use a normal household cleaner to clean the exterior of the fan.
It is normal for the motor to feel warm to the touch during operation. The motor is thermally protected and will auto-
matically shut off should it overheat for any reason. If this happens, immediately disconnect the fan from the power
outlet.
ASSEMBLY INSTRUCTIONS
Tools required: Crescent wrench, screwdriver and 1/8” Allen wrench.
SHORTER LEG SECTION
ACORN
NUT
CROSS BRACE
CARRIAGE
BOLT
LONGER LEG
SECTION
FRONT
FIG. 1
Step1: Assemble cross brace to the front of both legs. The shorter section
of the leg is the portion which goes on the floor. Insert the carriage
bolt through the square hole in the brace and the
round hole in the leg. Tighten acorn nut securely.
HOW TO ORDER REPAIR PARTS
In order to obtain any needed repair or replacement
parts, warranty service or technical information, please
contact Marley Engineered Products Service Center tollfree by calling 1-800-642-HEAT.
When ordering repair parts, always give the information listed as follows:
1. The Part Number
2. The Model Number
3. The Part Description
4. Date of Manufacture
Part No. 5200-2587-001
ECR# 34905
7/01
Dear Customer,
Thank you for your interest in Marley Engineered
Products products. We’re sure you will enjoy its benefits
for many years to come. Please take a minute to fill out
the following information and keep it in your permanent
records.
Date Purchased __________ Date Installed________
Model Number _____________________
LIMITED WARRANTY
This product by Marley Engineered Products is warranted to be free defects in material and workmanship for 12
months from date of original purchase.
There is no other warranty, express or implied, except
such as is expressly set forth herein.
Seller will not be liable for any general, consequential, or
incidental damages, including without limitation any
damage for loss of use or loss of profits, for any breach
of warranty or for negligence. Seller’s liability and
buyer’s exclusive remedy are limited to the repair of
defective goods or the shipment of equivalent goods, or
the granting of a reasonable allowance on account of
any defects as the seller may elect.
To obtain performance under this warranty, you must:
1. Contact the Marley Engineered Products Service
Department at 1-800-642 HEAT between the hours of
8:30 a.m. and 4:30 p.m. E.S.T. Mon. thru Fri.
2. Provide the model number of the product, the date of
installation, and state the nature of the difficulty being
experienced.
3. The Marley Engineered Products Service
Representative will determine the best way to resolve
the difficulty.
Products within warranty which have been installed and
returned to the seller for repair will be repaired and
returned as used products. Repairs to products outside
the warranty period will be subject to labor and parts
charges.
Some states have enacted legislation which (a) does
not allow the inclusion of limitations on incidental or consequential damages; (b) does not allow limitations on
the length of a warranty period; (c) precludes exclusion,
during the period of a limited warranty, of any implied
warranties of merchantability or fitness for purpose.
To the extent of such provisions being applicable in your
state, the limitations in this warranty may not apply.
TO ENSURE SAFE OPERATION
Be sure that operating instructions (packaged with the
product) are followed and that moving parts are kept
clean and free from obstructions.
Any warranties granted or liabilities assumed hereunder
will not apply to goods that have been damaged in transit, altered, repaired, installed or operated otherwise
than in conformity with the above requirements for safe
operation.
LIMITED W ARRANTY
CARRIAGE BOLT
ACORN NUT
CROSS BRACE
WASHER
WHEEL
LEG
ACORN NUT
WASHER
CARRIAGE
BOLT
NUT
NUT
SPACER
SHOULDER
BOLT
WHEEL
SPACER
SHOULDER
BOLT
FIG. 2
Step 2: Install each shoulder bolt through washer, spacer, wheel
and nut. Then on through flattened end of leg into the axle
brace. Repeat on the other side and tighten securely.
AXLE BRACE
Step 3: Assemble one collar on the top of each leg. Insert the handle with fan
head assembly into the legs through the collar. Tighten all four set
screws. (Adjust height with upper set screws only.)
HANDLE
FAN HEAD
ASSEMBLY
SET
SCREW
COLLAR
LEG
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
Loading...