Qlocktwo Touch User Manual
Enjoy time
1 2
3
1. 2. 3.
1.
2.
3.
15 °C – 30 °C
59 °F – 86 °F
32
Instructions for Use
Please read through the instructions carefully for the safe use of the
QLOCKTWO TOUCH and to ensure its long useful life and keep them
in a safe place. The Instructions for Use are also available online:
www.qlocktwo.com > Information
1. Safety Instructions
Please read the Instructions for Use carefully before assembling and using
your clock in order to exclude injury to persons and damage to property.
1.3 Location
IMPORTANT Please note the following in order to avoid material damage:
■
Do not use the clock in rooms where humidity is high (e.g. bathrooms).
■
Make sure the clock is placed out of the reach of children and animals.
■
Choose a sturdy, non-slip, robust surface.
■
Do not place the clock directly adjacent to or onto hard drives, computers, mobile
phones, credit cards or other electronic components that react sensitively to
magnets.
■
Position your QLOCKTWO TOUCH so that it cannot fall down in the event of
unintentional knocks or pulling of the cables.
■
Avoid direct heat radiation, for example heat from radiators.
■
Avoid direct sunlight.
EN
1.1 Scope of delivery
Unpack and check scope of delivery. Contact your specialised dealer in the event of
missing or damaged parts.
Scope of delivery:
■
QLOCKTWO TOUCH including an exchangeable front cover
■
Stainless steel base
■
Self-adhesive protection strips
■
3-m USB cable
■
5-V USB power supply unit
■
Microfibre cloth
■
Extra for stainless steel front cover: cotton gloves
1.2 Transport and storage
IMPORTANT Please note the following in order to avoid material damage:
■
Use the original packaging
■
Avoid knocking, shaking and vibrating during transportation.
■
Store in dry rooms at room temperature and low humidity.
1.4 Cleaning
The front cover is held in place with magnets and should be taken off for cleaning
purposes.
Removing/replacing the front cover:
IMPORTANT For stainless steel front covers: use cotton gloves (included with delivery)
>
Carefully pull the front cover off the casing.
>
Put the front cover onto a clean, level surface to clean it.
>
Replace the front cover accurately onto the front of the case after it has been
cleaned.
CAUTION Polishing cloths and solvents (e.g. turpentine or benzene), and detergents
containing alcohol (e.g. spirit) may damage the surfaces.
Acrylic glass front cover (QOLOR):
■
Remove slight stains with the microfibre cloth (included with delivery).
■
Remove stubborn stains with a suitable acrylic glass detergent or with a soft cloth
and water containing a little dishwasher detergent.
54
Loading...