Page 1
20 ft = 152
40 ft = 310
40 HQ = 350
W x D x H =
in:
85 x 32 x 27.5 cm
out:
76.5 x 31 x 48.1 cm
Gross weight
in:
10 kg
out:
24 kg
Product data sheet
Product category
Split unit air conditioner
Brand
Qlima
Model
S 2134
Colour
White
EAN code
8713508789989
EAN indoor unit
8713508789880
EAN outdoor unit
8713508789934
Technical specifications
Cooling
Heating
SEER / SCOP
W/W
6,1
4
Energy efficiency class average season¹
A++
A+
PdesignC / PdesignH
kW
3,4
2,1
Capacity (min./nom./max.)
kW
1,00 / 3,40 / 3,77
1,00 / 3,40 / 3,81
Power consumption (nom.)
kW
1,13
1,01
Indicative annual energy consumption during season
(Qce / Qhe)
kWh/a
195
735
Power supply
V/Hz/Ph
220-240~ / 50 / 1
Current (max.) Cooling / Heating
A
10
Airflow (low/mid/high)²
m³/h
350 / 430 / 550
For rooms up to²
m³
80 - 100
Dehumidification capacity³
l/24 h
28,8
Operating range - indoor unit
°C
17 ~ 32
0 ~ 30
Operating range - outdoor unit
°C
-15 ~ 53
-20 ~ 30
Thermostatic range
°C
16~31
Sound pressure level indoor unit at 1m (SPL)
dB(A)
22
Sound pressure level outdoor unit at 1m (min.) (SPL)
dB(A)
50
Fan speeds
5
Control type
electronic / remote control
Included filters
type
Screen
Refrigerant type / GWP / Charge⁵
R/g
R32 / 675 / 490
CO₂ equivalent
tonnes
0,331
Max.length refr. pipe between in- / outdoor unit⁶
m
25
Max. diff. in height between in - / outdoor unit
m
10
Diameter gas connection
Ø mm/inch
9.52 (3/8)
Diameter liquid connection
Ø mm/inch
6.35 (1/4)
Dimensions indoor unit (w x d x h)
mm
777 x 201 x 250
Dimensions outdoor unit (w x d x h)
mm
712 x 276 x 459
Compressor
rotaryRECHI
Protection class indoor unit
IPxx
IPX0
Protection class outdoor unit
IPxx
IPX4
Net. weight - indoor unit
kg
7,5
Net. weight - outdoor unit
kg
22
Warranty⁴
years
2/4
1. Measured conform EN 14825 / EN 14511-2011 / EN 12102
2. To be used as indication
3. Moisture removal at 32°C. 80% RH
4. Four years on compressor. 2 years on other components
5. Precharge sufficient for max 5 meters piping
6. When over 5 meter, additional refrigerant is needed, check manual.
Package content
Accessories (not included)
Description
EAN code
S 2134
Split unit air conditioner
Page 2
Cooling + dehumidifying + heating (heat pump): The air conditioning is a complete year -round air
treatment system. It heats and cools in an efficient way and can also be used as a dehumidifier.
Air conditioning: In COOLING mode the unit produces a refreshing cool airflow.
Heating: In HEATING mode the unit produces a warm air flow. The unit absorbs heat from the outdoor air to
warm the air inside, a very efficient technique.
Dehumidifying: In DRY mode the unit extract excessive moist from the room. Note: In COOLING mode the
air is also dehumidified.
Inverter technology: maximum comfort: The DC Inverter air conditioner uses its maximum power to get to
the set temperature when the appliance is turned on. Once the tempeature is reached, the unit continuously
adjusts the compressor speed to maintain the set temperature.
Inverter technology: minimum energy consumption: The compressor works at mimimum capacity once the
set temperature is reached. As a result, the over all power consumption is reduced significantly (up to 35%
less than non inverter/ conventional types).
Home Freezing prevention: By activating the freezing prevention mode (in heating mode only) the unit
overrules the indoor temperature setting and set it to approx 8-10°C. In this mode the unit operates at the
lowest possible energy consumption.
Environment friendly refrigerant R32: The most preferred and environmental friendly refrigerant R32 is
used in the air conditioner.
Automatic low sound mode: This high-tech air conditioner will operate on a whispering quiet level (22 dB)
as soon as the room temperature has reached the set temperature.
Turbo mode: With the Turbo mode the air conditioner will reach the preset temperature in the shortest
possible time.
Remote control with LCD screen: The air conditioner can be operated by the remote control up to a
distance of approx. 8 metres.
Remote control holder: The unit is delivered with a convenient holder that can be mounted on a wall. .
Adjustable airflow: The up-down airflow can be automatically changed by using the SWING mode. The left -
right airflow can be changed manually.
Sleep Mode: The air conditioner increases (cooling) or decreases (heating) automatically the set
temperature with 1°C per hour (first two hours) and then maintain the temperature (next five hours). After 7
hours, the unit will stop automatically. In this mode the unit works silently and saves energy at the same
time.
Fan speed setting: The airconditioner has multiple speed setting. The LCD display on the remote control
will show the chosen speed.
Automatic operation:In auto mode the unit selects the most suitable operating mode, by monitoring he
indoor temperature: Cooling, Dehumidifying or Heating.
Auto restart function: In case of a power failure during operation, the latest operation status is memorised
and the unit starts operating automatically after power recovery.
Timer: Timer function can be set between 30 minutes and 24 hours (Timer On or Timer Off).
Standby mode: This energy saving feature enables the unit to stay in standby mode (only 1 W energy
consumption).
White carton box: The unit is delivered completely with all auxiliary parts
4-in-1 functionality
Inverter techology
Indoor freezing
prevention (8ºC)
Eco-friendly refrigerant
Remote control with
display included
Timer function
Sleep mode
S 2134
Split unit air conditioner
Loading...