Qlight QTG60L, QTG50L, QTG50ML, QTG60ML, QTG70L User Manual

Modular LED Signal Tower Lights

54 65

85dB

5030

QTG50/ QTG60/ QTG70

Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

1. During wiring or maintenance, please completely turn o󰘯 the power of the product. (Failure to follow this may lead to an electric shock.)

2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a 󰘰re to the product, electric shock, physical injury,
malfunction or damage to the product.)

3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to 󰘰re, electric shock, or product damage.)

4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to 󰘰re, electric shock, or product damage.)

5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, 󰘰re, electric shock and loss of life.)

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, and or malfunction of
the product that would void the warranty.

1. Please remove any objects that can interrupt ventilation around the product.

2. Please turn o󰘯 the power of the product immediately if it fails to operate properly.

3. Carefully wire the product according to each product’s speci󰘰cation.

4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.

5. Do not apply excessive force/impact to the product.

6. Failure to follow any of the instructions above may cause malfunction or damage to the product, 󰘰re, and electric shock.

Ordering Specications

QTG50/ 60/ 70L

[Model number]

| | | | |

• QTG50/ 60/ 70L

• QTG50/ 60/ 70L-BZ

• QTG50/ 60/ 70LF

• QTG50/ 60/ 70LF-BZ

• QTGA50/ 60/ 70L

• QTGA50/ 60/ 70L-BZ

• QTGA50/ 60/ 70LF

• QTGA50/ 60/ 70LF-BZ

QTG50/ 60/ 70ML

[Model number]

| | | |

• QTG50/ 60/ 70ML

• QTG50/ 60/ 70ML-BZ

• QTG50/ 60/ 70MLF

• QTG50/ 60/ 70MLF-BZ

• QTGA50/ 60/ 70ML

• QTGA50/ 60/ 70ML-BZ

• QTGA50/ 60/ 70MLF

• QTGA50/ 60/ 70MLF-BZ

3

-

[Layer count]

• 1 Layer

• 2 Layers

• 3 Layers

• 4 Layers

• 5 Layers

-

[Layer count]

• 1 Layer

• 2 Layers

• 3 Layers

• 4 Layers

• 5 Layers

3

110/220

-

[Voltage] [Color] [Mounting option]

• 12-DC12V

• 24-DC24V

• 110/220

-AC110V~220V

-

• 12-DC12V

• 24-DC24V

• 110/220-AC110V~220V

RAG

-

R-Red
A-Amber
G-Green
B-Blue
W-White

110/220

[Voltage] [Color]

LW18

-

• (Blank)

- Standard type

• Mounting type

- LB18/24 - LW18/24

- QZ18/24 - SZ18/24

- QL18/24 - SL18/24

- QLA18/24

-

RAG

R-Red
A-Amber
G-Green
B-Blue
W-White

QTG50L

QTG50ML

Please scan the QR code for more detailed
product information.

QTG60L

QTG60ML

www.qlight.com

QTG70L

QTG70ML

Product Specications

•

QTG50L

Model number

QTG50L
Steady

QTG50L-BZ
Steady/w built-in
buzzer

QTG50LF
Steady/Flashing

QTG50LF-BZ
Steady/Flashing
/w built-in buzzer

QTGA50L
Steady

QTGA50L-BZ
Steady/w built-in
buzzer

QTGA50LF
Steady/Flashing

QTGA50LF-BZ
Steady/Flashing
/w built-in buzzer

•

QTG60L

Model number

QTG60L
Steady

QTG60L-BZ
Steady/w built-in
buzzer

QTG60LF
Steady/Flashing

QTG60LF-BZ
Steady/Flashing
/w built-in buzzer

QTGA60L
Steady

QTGA60L-BZ
Steady/w built-in
buzzer

QTGA60LF
Steady/Flashing

QTGA60LF-BZ
Steady/Flashing
/w built-in buzzer

Layer
count

1

2

3

4

5

Layer
count

1

2

3

4

5

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

Voltage Current

0.085A

0.065A

Max. 0.045A

0.170A

0.130A

Max. 0.065A

0.255A

0.195A

Max. 0.085A

0.340A

0.260A

Max. 0.105A

0.425A

0.325A

Max. 0.125A

Voltage Current

0.100A

0.070A

Max. 0.055A

0.200A

0.140A

Max. 0.075A

0.300A

0.210A

Max. 0.095A

0.400A

0.280A

Max. 0.115A

0.500A

0.350A

Max. 0.135A

Certicate

DC 24V

only

DC 24V

only

Certicate

DC 24V

only

DC 24V

only

Weight

0.34kg

0.34kg

0.44kg

0.43kg

0.43kg

0.53kg

0.51kg

0.51kg

0.61kg

0.60kg

0.60kg

0.70kg

0.68kg

0.68kg

0.78kg

Weight

0.41kg

0.41kg

0.51kg

0.50kg

0.50kg

0.60kg

0.58kg

0.58kg

0.68kg

0.67kg

0.67kg

0.77kg

0.75kg

0.75kg

0.85kg

Color

R-Red

R-Red
G-Green

R-Red
A-Amber
G-Green

R-Red
A-Amber
G-Green
B-Blue

R-Red
A-Amber
G-Green
B-Blue
W-White

Color

R-Red

R-Red
G-Green

R-Red
A-Amber
G-Green

R-Red
A-Amber
G-Green
B-Blue

R-Red
A-Amber
G-Green
B-Blue
W-White

•

QTG50ML

Model number

QTG50ML
Steady

QTG50ML-BZ
Steady/w built-in
buzzer

QTG50MLF
Steady/Flashing

QTG50MLF-BZ
Steady/Flashing
/w built-in buzzer

QTGA50ML
Steady

QTGA50ML-BZ
Steady/w built-in
buzzer

QTGA50MLF
Steady/Flashing

QTGA50MLF-BZ
Steady/Flashing
/w built-in buzzer

•

QTG60ML

Model number

QTG60ML
Steady

QTG60ML-BZ
Steady/w built-in
buzzer

QTG60MLF
Steady/Flashing

QTG60MLF-BZ
Steady/Flashing
/w built-in buzzer

QTGA60ML
Steady

QTGA60ML-BZ
Steady/w built-in
buzzer

QTGA60MLF
Steady/Flashing

QTGA60MLF-BZ
Steady/Flashing
/w built-in buzzer

Layer
count

1

2

3

4

5

Layer
count

1

2

3

4

5

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

Voltage Current

0.085A

0.065A

Max. 0.045A

0.170A

0.130A

Max. 0.065A

0.255A

0.195A

Max. 0.085A

0.340A

0.260A

Max. 0.105A

0.425A

0.325A

Max. 0.125A

Voltage Current

0.100A

0.070A

Max. 0.055A

0.200A

0.140A

Max. 0.075A

0.300A

0.210A

Max. 0.095A

0.400A

0.280A

Max. 0.115A

0.500A

0.350A

Max. 0.135A

Certicate

DC 24V

only

DC 24V

only

Certicate

DC 24V

only

DC 24V

only

Weight

0.19kg

0.19kg

0.29kg

0.27kg

0.27kg

0.37kg

0.36kg

0.36kg

0.46kg

0.44kg

0.44kg

0.54kg

0.53kg

0.53kg

0.63kg

Weight

0.26kg

0.26kg

0.36kg

0.34kg

0.34kg

0.44kg

0.43kg

0.43kg

0.53kg

0.51kg

0.51kg

0.61kg

0.59kg

0.59kg

0.69kg

Color

R-Red

R-Red
G-Green

R-Red
A-Amber
G-Green

R-Red
A-Amber
G-Green
B-Blue

R-Red
A-Amber
G-Green
B-Blue
W-White

Color

R-Red

R-Red
G-Green

R-Red
A-Amber
G-Green

R-Red
A-Amber
G-Green
B-Blue

R-Red
A-Amber
G-Green
B-Blue
W-White

•

QTG70L

Model number

QTG70L
Steady

QTG70L-BZ
Steady/w built-in
buzzer

QTG70LF
Steady/Flashing

QTG70LF-BZ
Steady/Flashing
/w built-in buzzer

QTGA70L
Steady

QTGA70L-BZ
Steady/w built-in
buzzer

QTGA70LF
Steady/Flashing

QTGA70LF-BZ
Steady/Flashing
/w built-in buzzer

Layer
count

1

2

3

4

5

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

Voltage Current

0.100A

0.070A

Max. 0.055A

0.200A

0.140A

Max. 0.075A

0.300A

0.210A

Max. 0.095A

0.400A

0.280A

Max. 0.115A

0.500A

0.350A

Max. 0.135A

Certicate

DC 24V

only

DC 24V

only

Weight

0.54kg

0.54kg

0.64kg

0.66kg

0.66kg

0.76kg

0.81kg

0.81kg

0.90kg

0.96kg

0.96kg

1.06kg

1.20kg

1.20kg

1.29kg

•

QTG70ML

Color

R-Red

R-Red
G-Green

R-Red
A-Amber
G-Green

R-Red
A-Amber
G-Green
B-Blue

R-Red
A-Amber
G-Green
B-Blue
W-White

Model number

QTG70ML
Steady

QTG70ML-BZ
Steady/w built-in
buzzer

QTG70MLF
Steady/Flashing

QTG70MLF-BZ
Steady/Flashing
/w built-in buzzer

QTGA70ML
Steady

QTGA70ML-BZ
Steady/w built-in
buzzer

QTGA70MLF
Steady/Flashing

QTGA70MLF-BZ
Steady/Flashing
/w built-in buzzer

Layer
count

1

2

3

4

5

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

AC/DC12V
AC/DC24V

AC110V~220V

Voltage Current

0.100A

0.070A

Max. 0.055A

0.200A

0.140A

Max. 0.075A

0.300A

0.210A

Max. 0.095A

0.400A

0.280A

Max. 0.115A

0.500A

0.350A

Max. 0.135A

Certicate

DC 24V

only

DC 24V

only

Weight

0.42kg

0.42kg

0.52kg

0.56kg

0.56kg

0.66kg

0.77kg

0.77kg

0.87kg

0.92kg

0.92kg

1.02kg

1.07kg

1.07kg

1.17kg

Color

R-Red

R-Red
G-Green

R-Red
A-Amber
G-Green

R-Red
A-Amber
G-Green
B-Blue

R-Red
A-Amber
G-Green
B-Blue
W-White

2 3

QTG60ML : DC
QTG60MLF : DC
QTG60ML-BZ : DC

QTG60ML : AC
QTG60MLF-BZ : DC

QTG60MLF : AC
QTG60ML-BZ : AC
QTG60MLF-BZ : AC

QTG60L : DC
QTG60LF : DC
QTG60L-BZ : DC

QTG60L : AC
QTG60LF-BZ : DC

QTG60LF : AC
QTG60L-BZ : AC
QTG60LF-BZ : AC

Ø60

Ø60

Ø60

13.5

13.5

13.5

50

L1

12

12.550

85

123

L2

L3

50

50

12

12.5

12

12.5

Ø14 CABLE ENTRY

PCD 40

360˚/3-M4 BOLT

BUZZER VOLUME
CONTROL LEVER

BUZZER VOLUME
CONTROL LEVER

LAYER

1

2

3

4

5

L1

126

176

226

276

326

L2

161

211

261

311

361

L3

199

249

299

349

399

LAYER

1

2

3

4

5

L1

352

402

452

502

552

L2

387

437

487

537

587

L3

425

475

525

575

625

Ø60

13.550

Ø60

13.550

Ø60

13.550

L1

62

97

135

26.5200

26.5200

26.5200

L2

L3

Ø18 Ø18

Ø18

M18Ⱌ1.5 THREADM18Ⱌ1.5 THREADM18Ⱌ1.5 THREAD

QTG70ML : DC
QTG70MLF : DC
QTG70ML-BZ : DC

QTG70ML : AC
QTG70MLF : AC
QTG70ML-BZ : AC
QTG70MLF-BZ : DC

QTG70MLF-BZ : AC QTG70L : DC

QTG70LF : DC
QTG70L-BZ : DC

QTG70L : AC
QTG70LF : AC
QTG70L-BZ : AC
QTG70LF-BZ : DC

QTG70LF-BZ : AC

Ø70

Ø70

Ø70

13.5

13.5

13.5

50

50

50

L1

L2

L3

50

85

123

12

12.5

12

12.5

12

12.5

BUZZER VOLUME
CONTROL LEVER

LAYER

1

2

3

4

5

L1

126

176

226

276

326

L2

161

211

261

311

361

L3

199

249

299

349

399

Ø14 CABLE ENTRY

PCD 50

360˚/3-M4 BOLT

Ø70

Ø70

Ø70

13.5

13.5

13.550

50

50

L1

6228.5120

Ø24

M24Ⱌ1.5 THREADM24Ⱌ1.5 THREAD

M24Ⱌ1.5 THREAD

Ø24

L2

L3

97

135

28.5120

28.5120

Ø24

BUZZER VOLUME
CONTROL LEVER

QTG50ML : DC
QTG50MLF : DC
QTG50ML-BZ : DC

QTG50ML : AC
QTG50MLF-BZ : DC

QTG50MLF : AC
QTG50ML-BZ : AC
QTG50MLF-BZ : AC

QTG50L : DC
QTG50LF : DC
QTG50L-BZ : DC

QTG50L : AC
QTG50LF-BZ : DC

QTG50LF : AC
QTG50L-BZ : AC
QTG50LF-BZ : AC

LAYER

1

2

3

4

5

L1

116

156

196

236

276

L2

158

198

238

278

318

L3

204

244

284

324

364

LAYER

1

2

3

4

5

L1

344

384

424

464

504

L2

386

426

466

506

546

L3

432

472

512

552

592

Ø50

13.540

Ø50

13.540

Ø50

13.5

L112

50

92

12

12.5

12.5

L2

L3

L1

62

104

L2

L3

150200 28.5

200 28.5

200 28.5

40

138

12

12.5

BUZZER VOLUME
CONTROL LEVER

BUZZER VOLUME
CONTROL LEVER

Ø14 CABLE ENTRY

PCD 30

360˚/3-M4 BOLT

Ø50

13.540

Ø50

13.540

Ø50

Ø18 Ø18 Ø18

13.540

M18Ⱌ1.5 THREADM18Ⱌ1.5 THREAD

M18Ⱌ1.5 THREAD

LAYER

1

2

3

4

5

L2

309

359

409

459

509

L3

347

397

447

497

547

L1

274

324

374

424

474

Dimensions

•

QTG50(M)L

(Units : mm)

•

QTG60(M)L

•

QTG70(M)L

Wiring Instructions

■

Wiring using external contact

• In case of wiring with external contacts, refer to the wiring diagrams below according to your product’s type and voltage setting.

Wiring diagrams Wiring diagrams

DC Steady

AC Steady

QTG50ML
QTG50L
QTG60ML
QTG60L
QTG70ML
QTG70L

DC Steady/Flashing

QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF



Red
Amber



Green



Blue



White



Brown

Black

•

QTG(A)

•

QTG

☐☐

☐☐

L

(M)L -

Refer to this diagram for
buzzer type product

Lens diameter

External contact External contact

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Steady Steady

Fuse

Power

50(50mm) : QTG50(M)L
60(60mm) : QTG60(M)L

70(70mm) : QTG70(M)L

Red



Amber
Green



Blue



White



Brown



Black

Common Common

White
Black

External contact External contact

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Steady

Flash

Common Common

Fuse Fuse

Power

QTG50ML
QTG50L
QTG60ML
QTG60L
QTG70ML
QTG70L

AC Steady/Flashing

QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF



Red
Amber



Green



Blue



White



Brown

Black
White
Black

•

QTG(A)

•

QTG

(M)L - Refer to this diagram for

☐☐

buzzer type product

☐☐

L

Lens diameter

Fuse

50(50mm) : QTG50(M)L
60(60mm) : QTG60(M)L

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Power

70(70mm) : QTG70(M)L

Red



Amber
Green



Blue



White



Brown



Black
Gray
White
Black

Flash

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Steady

Power

• QTG(A)

•

QTG

Lens diameter

70(70mm) : QTG70(M)LF

(

M)LF - Refer to this diagram for

☐☐

buzzer type product

☐☐

LF

50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF

• QTG(A)

•

QTG

(

M)LF - Refer to this diagram for

☐☐

buzzer type product

☐☐

LF

Lens diameter

50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF

70(70mm) : QTG70(M)LF

• DC steady type cable specication: External power/ signal line - UL1007 AWG22(0.3sq) 400mm

• AC steady, AC/DC steady/ashing type cable specication : External power line - UL1015 AWG18(0.75sq) × 2C 400mm,
External signal line - UL1007 AWG22(0.3sq) 400mm

4 5

NPN-Transistor

1

2

3

4

5

PNP-Transistor

1

2

3

4

5

PNP-Transistor

1

2

3

4

5

Flash

PNP-Transistor

1

2

3

4

5

■

Wiring using transistor

•

When using a transistor, please choose between the NPN or PNP type transistor which best matches the voltage and product type,

then connect them correctly according to the wiring diagrams below.

Wiring diagrams

DC Steady

External Transistor-NPN External Transistor-PNP

QTG50ML
QTG50L
QTG60ML
QTG60L
QTG70ML
QTG70L

Red
Amber
Green
Blue
White
Brown

Black

•

QTG(A)

•

QTG

(M)L - Refer to this diagram for buzzer type product

☐☐

☐☐

L

Lens diameter

50(50mm) : QTG50(M)L
60(60mm) : QTG60(M)L

Fuse

Steady

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Power

70(70mm) : QTG70(M)L

Red
Amber
Green
Blue
White
Brown

Black

Fuse

Steady

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Power

DC Steady/Flashing

QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF

Red
Amber
Green
Blue
White
Brown

Black

White
Black

• QTG(A)

•

QTG

(

M)LF - Refer to this diagram for

☐☐

buzzer type product

☐☐

LF

Lens diameter

External Transistor-PNP External Transistor-PNP

Common

Common Common

Fuse Fuse

50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Steady

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5

Flash Flash

Power Power

70(70mm) : QTG70(M)LF

AC Steady/Flashing

QTG50MLF
QTG50LF
QTG60MLF
QTG60LF
QTG70MLF
QTG70LF

Red
Amber
Green
Blue
White
Brown

Gray

Black

White
Black

• QTG(A)

•

QTG

(

M)LF - Refer to this diagram for

☐☐

buzzer type product

☐☐

LF

Lens diameter

Common

50(50mm) : QTG50(M)LF
60(60mm) : QTG60(M)LF

Steady

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Buzzer

Layer 1
Layer 2
Layer 3
Layer 4
Layer 5

70(70mm) : QTG70(M)LF

• DC steady type cable specication: External power/ signal line - UL1007 AWG22(0.3sq) 400mm

• AC steady, AC/DC steady/ashing type cable specication : External power line - UL1015 AWG18(0.75sq) × 2C 400mm,
External signal line - UL1007 AWG22(0.3sq) 400mm

Parts De nition

Cover(ABS)

Lens(PC)

Housing(ABS)

Sound volume lever

Pipe(AL)

How to Change Lens Kit

•

Disassembling lens kits

①

Twist the upper lens kit in a

counter-wise direction so the

“I” mark from both kits align.

②

Disassemble by removing the
upper lens kit from the lower

one.

•

Assembling lens kits

①

Put the two lens kits together

by aligning the upper lens’ “I”
mark and the lower lens’ “I”

mark together.

②

Lock the two kits by twisting the
upper lens kit in a counter
direction so the upper lens’ “
mark aligns with the lower lens’
“I” mark.

-

wise

◁

※

Cautions

Contact
Point

”

Lens modules are connected through
cone-shaped contact point. In case
the contact point is damaged, it may
cause a contact failure.

Installation Environment and Protection Rating

• This product is designed for indoor use with protection rating of IP65(standard type) and IP54(buzzer type).

•

If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated(IP65),

it may cause malfunction or damage to the product.

• For further information, please visit our website (http://www.qlight.com).

6

Buzzer Sound Volume Adjustment Instructions

13

50

84

50

20

44

86

12

35

60

40

12

36

66

10

6

PCD30~40

4-Ø5 HOLES

360°/3-
Ø5 HOLES

4-Ø5 HOLES

360°/3-
Ø5 HOLES

PCD40~50

Buzzer volume is reduced by sliding
the volume control lever to the left
as show in the diagram to the left.

( Min. 65±4dB/m )

Mounting Hole Specications

■

QTG50M/ QTG60M/ QTG70M - Direct Mounting Type Model

①

Machine holes on the mounting surface referring to the

diagram below.

3-Ø5 HOLES

14 HOLES

Ø

3-Ø5 HOLES

14 HOLES

Ø

Raise/ Increase the buzzer volume

PCD 30

by sliding the control lever to the
right as shown in the diagram to
the left.

( Max. 85±4dB/m )

■

2 Sound Buzzer Type

• Buzzer type model with 2 different sounds of long beeping

sound and short beeping sound is available upon request.

3-Ø5 HOLES

Ø14 HOLES

PCD 50

②

First, remove the ange nuts from bolts and place the product

③

F

surface until the product is tightened securely.

Mounting Accessories (Sold Separately)

• Please refer to the dimensions below for installation of mounting brackets.

■

QTG50ML/ QTG60ML/ QTG70ML

QTG50 series
QTG60 series

-

Direct Mounting Type Model

Ø12

PCD30~40

360°/3­Ø5 HOLES

4-Ø5 HOLES

Ø12 CABLE ENTRY

Dimensions

66

36

40

20

35

60

PCD 40

QTG50M

QTG60M

QTG70M

through the mounting surface holes.

asten the ange nuts on the opposite side of the mounting

66

36

40

12

10

35

60

PCD30~40

360°/3­Ø5 HOLES

4-Ø5 HOLES

6

QTG70 series

Ø12

PCD40~50

PCD40

360°/3­Ø5 HOLES

4-Ø5 HOLES

Ø12 CABLE ENTRY

PCD40~50

360°/3­Ø5 HOLES

4-Ø5 HOLES

13

50

25

TWS45 TWA45

66

36

50

84

TWS80 TWA80

86

44

50

20

12

50

84

■

QTG50L/ QTG60L -

Pole Mounting Type Model

Dimensions

QTG50 series
QTG60 series

Ø18

M18x1.5
THREAD

2-Ø8.5 HOLES

18mm SCREW & NUT LB18

38
50

4-Ø5 HOLES

58

46

34

12x22
CABLE ENTRY

4-Ø5 HOLES

PCD 56

Ø18

Ø28

1/2" PF

52

66

LW18 SZ18

Ø70

69

52

Ø18

24

75

34

32

Ø18

50

4-Ø5.5 HOLES

PCD 54~56

Ø18 CABLE ENTRY

4-Ø5.5 HOLES

PCD 54~56

Ø18

51

Ø70

Ø11 CABLE ENTRY

4-Ø6 HOLES

PCD 73

Ø90

QZ18 SL18

Ø18

67

Ø19 CABLE ENTRY

51.5

Ø70

4-Ø5.5 HOLES

PCD 73

Ø90

QL18 QLA18

Ø18

45.5 66

Ø18

60 57

8 9

■

QTG70L

-

Pole Mounting Type Model

Dimensions

QTG70 series

M24x1.5

THREAD

24mm SCREW & NUT LB24

Ø24

Ø35

33

12x22 CABLE ENTRY

1/2" PF

Ø24

2-Ø8.5 HOLES

4-Ø5 HOLES

4-Ø5 HOLES

PCD 73

69.5

70

46

34

38

50

52

LW24 SZ24

70

Ø90

46

Ø24

32

81

34

46

Ø24

55.5

4-Ø5.5 HOLES

PCD 54~56

Ø18 CABLE ENTRY

4-Ø5.5 HOLES

PCD 71~73

Ø24

55

Ø70

Ø11 CABLE ENTRY

4-Ø6 HOLES

PCD 73

Ø90

QZ24 SL24

Ø24

Ø19 CABLE ENTRY

51.567

Ø90

4-Ø5.5 HOLES

PCD 73

Ø90

QL24 QLA24

Ø24

45.5 66

Ø24

57

60

Technical Certication

•

Qlight products are designed to meet strict quality and technical standards. Thus, the Qlight brand is widely recognized for its high quality

and technical innovations from leading institutions around the world.

MEMO

Qlight Co., Ltd. www.qlight.com | [e-mail]

Head Of ce | A-412, 579, Gyeongin-ro, Guro-gu, Seoul, Korea Tel. [phone] Fax : [phone]

Factory | 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. [phone]

Qlight Overseas Sales Dept |

185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea Tel : [phone]

Qlight Public Relations & Marketing Team Of ce | Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : [phone]

Qlight USA, Inc. www.qlight.com www.qlightusa.com | [e-mail]

3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. [phone] Fax. [phone]

SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | [e-mail]

China Factory/ Shanghai Sales Of ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. [phone] Fax. [phone]

Product Operation Inquiry / Customer Support [phone]

You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.

※

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Head office : A-412, 579 Kyungin-Ro, Guro-Gu, Seoul, Korea (Postal Code : 08212)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)

www.qlight.com

EN-1904A