Qingping Technology CGG1 User Manual

Qingping Bluetooth Temperature and Humidity Monitor User Manual

Welcome to Qingping Bluetooth Temperature and Humidity Monitor

Start using

Please open the back cover and pull out the insulating plastic piece embedded in the battery

compartment:

After pulling out the insulating plastic sheet, the Qingping Bluetooth Temperature and Humidity

Monitor will start working.

Desktop mode

Qingping Bluetooth Temperature and Humidity Monitor can be used on the desktop.

By splitting the back cover halfway (at an angle of 45° to the body), the Qingping Bluetooth

Temperature and Humidity Monitor can be placed on the desktop smoothly:

* Please avoid placing this product on the surface of suede or raised particles to prevent the vent

hole at the bottom of the product from being blocked, resulting in inaccurate measurement.

Wall mode

Qingping Bluetooth Temperature and Humidity Monitor can be used with wall stickers and

attached to the wall.

There is a wall sticker in the package, and the double-sided adhesive is stuck on the back of the

wall sticker:

Remove the double-sided adhesive film, stick the wall sticker to the selected position, and then

absorb the Qingping Bluetooth Temperature and Humidity Monitor:

Switching temperature unit

The temperature unit of the Qingping Bluetooth Temperature and Humidity Monitor can be

switched between Celsius (°C) and Fahrenheit (°F).

Short press the button on the back of the product to switch:

Connect to Qingping Air App

The “Qingping Air” mobile App can be downloaded at cleargrass.com/air. You can also scan the

QR code below to download:

After installing the App, please add the device to the App, select “Qingping Bluetooth

Temperature and Humidity Monitor” and follow the prompts.

* After opening the Qingping Air App and connecting the Qingping Bluetooth Temperature and

 Press and hold the button on the back of the product for 8 seconds to let the screen start to

 Press and hold the button on the back of the product for 2 seconds, then release your hand

Humidity Monitor, it will automatically synchronize the last 30 days of historical data, please keep

the Bluetooth connection unblocked during the process.

* Remote access to the data of Qingping Bluetooth Temperature and Humidity Monitor through

Qingping Air App, need to be equipped with Qingping Bluetooth gateway device.

Replacement battery

When the screen does not display content, please replace the battery. The Qingping Bluetooth

Temperature and Humidity Monitor uses a button battery of the CR2430.

Completely open the back cover (at an angle of 90° to the body) and then use a coin or similarly

shaped object as a wrench to unscrew the battery cover:

After putting in a new battery, screw on the battery cover and the Qingping Bluetooth

Temperature and Humidity Monitor will restart work immediately.

* After removing the battery, the content may still be displayed on the screen, which is normal.

The screen of this product is an electronic ink screen that can be kept for a while without power.

Reset

It is usually not necessary to restore the factory settings. If you want to erase the data recorded

locally by the Qingping Bluetooth Temperature and Humidity Monitor and release the pairing

with the Qingping Air App, you can restore the factory settings.

Restore factory settings:

highlight all the segments;

and the screen will return to normal display, the factory reset will be completed.

Qingping Technology (Beijing) Co., Ltd.

Address: 401, Block B, Fangheng Times Center, No. 10 Wangjing Street, Chaoyang District, Beijing,

China

Website: cleargrass.com

Tel: [phone]

E-mail: [e-mail]