Qingdao Hisense Intelligent Commercial System VC220 User Manual

VC220 Manual

1 Customer Display Components......................................................................................2

2 Customer Display Installation......................................................................................... 3

3Customer Display Set Discription.................................................................................... 3

3.1 Install customer display setup software................................................................3

3.2 Use customer display setup software .................................................................. 3

4Customer Display Test....................................................................................................6

4.1 Test software installation......................................................................................6

4.2 Use the testing software.......................................................................................6

5.Customer Display Specifications.................................................................................... 8

1 Customer Display Components

1. VFD Disnplay

2.Customer Display Pole

3. Customer Display Base

4. Customer Display Cable

2 Customer Display Installation

①

Connect customer display components to bottom plate expansion
board, connect signal cable to COM3；plug one side of power supply into
motherboard USB interface, plug the other side into circular power port of
the customer display signal cable.

② Push forward the whole component into the host, which having location clip
on the left and right side;
③ Fix screws with screw driver from top to bottom to prevent them falling off.

3Customer Display Set Discription

3.1 Install customer display setup software

Double click setup software, accept all the default settings.

3.2 Use customer display setup software

①double click VFD_Setup_Utilityicon on the desktop.
②open up the following interface