Qingdao Hisense Intelligent Commercial System HM516 User Manual

Tablet POS

HM516 USER MANUAL

Qingdao Hisense Intelligent Commercial System Co.,LTD.

1

Power adapter type

Manufacturer of Power Adapter

Input(AC)

Output(DC)

12V

(for Docking station)

FSP GROUP INC.

100-240V

12V, 3.33A

5V(for Tablet)

shenzhen honor electronic CO.,LTD

100-240V

5V, 2A

Notes

It is required grounded well and the supply voltage shall be stable, and you must confirm that the

☆

voltage of the outlet provides shall be in line with the voltage marked on the lable of the unit.

☆ Be sure not to sprinkle any liquid or fall any object into the unit.
☆ Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS.
☆ Do not switch on or off the host frequently, because it is easy to result in damage on the machine.
☆ Be sure not to unplug or plug in any live part or external device when they are in energized state,

and the connecting cables of the POS between parts shall be connected securely.

☆ Be sure neither to lengthen cable nor to replace parts at your will, if you have any demand, please

contact with the reseller.

☆ The unit shall be used under dry, ventilated & clean environment away from sunlight.
☆ In case of safety fault, such as peculiar smell, abnormal sound, leakage and other faults, you must

switch off the power supply at once and then contact with reseller.
The RJ11 port at the back of the host is connected with the cash drawer, as it is not a

☆

communication port, users shall not use the port for dial-up networking.
The product is a Level B one, it may cause radio interference in living environment. In such case,

☆

users may need to take practical & feasible measures against the interference.
When the POS is not in use, you shall switch off power supply.

☆

Static may damage to the integrated circuit in the host machine.

☆

Please use common USB Cable or original charger, Otherwise, It may result to danger. When

☆

you use a charger for charging, adapter shall be installed near the equipment and shall be easily
accessible.

This product conforms with standard EN50332. Use careful with the earphone maybe possible

☆

excessive sound pressure from earphones and headphones can cause hearing loss.
The product shall only be connected to a USB interface of version USB2.0，this interface can

☆

provide maximum current of 500mA.
Extreme Operating Temperature : 45℃

☆

The device complies with RF specifications when the device used at10mm form your body.

☆

Declaration Of Conformity Hereby, Hisense Declares that this Tablet POS is in compliance with

☆

the essential requirements and other relevant provisions of directive 1995/5/EC.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference

2

will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

The manufacturer has the right to modify contents of the instruction book but without prior
announcements!

3