Qingdao Hisense Intelligent Commercial System HK716 Users Manual

HK716 All-in-one POS of Sale System
System Integration Manual
Document version 1.0
Copyright Statement
© 2017 Hisense Company Ltd. All Rights Reserved.
All material in this System Integration Manual is the property of Hisense Company Ltd. and its
subsidiaries, and is protected under International, US, CANADA, MEXICO copyright and/or other
manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd. is a
violation of Hisense Company Ltd. rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in
any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without
the prior written permission of Hisense Company Ltd.
Requests for permission to store, reproduce, transmit or distribute materials may be made to one of
the following addresses:
China
No.399, Songling Road, Laoshan District, Qingdao,
266101, China
Hisens
trademarks of Hisense Company Ltd. and its subsidiaries. All other trademarks are the property of their
respective holders
e, and any and all other Hisense product names, logo’s, slogans or marks are registered
Hisense HK716 Series All-in-One POS System Integration ManualPage 2 of 22
Safety Notice
Safety notices to follow before installing or using the POS system
Caution:
Make sure that the voltage of the power outlet is the same as the voltage that’s marked on the
outside of the POS system.
Always keep the power cable properly connected and grounded.
Keep the POS product in a safe, stable place that’s away from heavy or sharp objects.
Install the POS product in a well-ventilated area and use it in a clean and dry place.
Make sure your USB flash drive or disk does not contain viruses before you insert it into the POS
product and always back up important files. Use the separate power strips specifically designed for this POS system.
Do not use loose or damaged power cables.
Do not touch the power plug with wet hands.
Do not plug in the AC power cord while you are opening the unit to install features or service this
POS product.
Warning
Static may cause damage to the POS. Incorrectly replacing a battery can result in an explosion. Make sure to only replace the
battery with the same or equivalent type as recommended by the manufacturer (Hisense). Discard used batteries according to the manufacturer’s instructions.
Do not remove the peripheral device before you turn off the system. Turn on the system after you turn on peripheral devices and turn off the peripheral
devices after you turn off the system
The manufacturer has the right to modify contents of this manual without prior announcements!
Hisense HK716 Series All-in-One POS System Integration ManualPage 3 of 22
Table of Contents
Table of Contents .................................................................................................................................... 4
List of Figures .......................................................................................................................................... 5
List of Tables ............................................................................................................................................ 6
Section 1. Introduction............................................................................................................................ 7
Welcome to the Hisense family! ............................................................................................................. 7
Overview of the Hisense HK716 Series All-in-one POS System ........................................................... 7
Section 2. Understanding the HK716 POS ............................................................................................... 8
Understanding the HK716 POS ............................................................................................................... 8
Controls and other Exterior Components ........................................................................................... 8
Ports .................................................................................................................................................... 9
Section 3. Installing the POS System ....................................................................................................... 9
Installing the POS System ........................................................................................................................ 9
Finding the right location to install the POS system ............................................................................ 9
Connecting a DC power supply cable ................................................................................................ 10
Section 4. Getting familiar with the HK716 motherboards ................................................................... 11
HK716 Motherboard Layout ................................................................................................................. 11
HK716 series Connectors and Functions ........................................................................................... 13
HK716 series Common Jumpers and functions ................................................................................. 14
HK716 series Display ......................................................................................................................... 14
HK716 series Audio Description ........................................................................................................ 16
HK716 series LAN .............................................................................................................................. 16
HK716 series USB .............................................................................................................................. 16
HK716 series CASH DRAWER ............................................................................................................. 16
HK716 series Power connector ......................................................................................................... 17
Section 5. Assembling and Disassembling the POS System .................................................................. 18
Assembling and disassembling the POS ................................................................................................ 18
Back cover disassembly ..................................................................................................................... 18
Printer disassembly ........................................................................................................................... 19
Section 6. Product Specifications .......................................................................................................... 20
HK716 Specifications ............................................................................................................................. 20
Appendix A. Printer settings ................................................................................................................. 21
Configuring the Printer Settings ............................................................................................................ 21
Hisense HK716 Series All-in-One POS System Integration ManualPage 4 of 22
List of Figures
Figure 1. Front View of the HK716 POS System ...................................................................................... 8
Figure 2. Built-in ports of the POS system .............................................................................................. 9
Figure 3. DC power input ...................................................................................................................... 10
Figure 4. DC power supply cable ........................................................................................................... 10
Figure 5. HK716 Motherboard .............................................................................................................. 12
Figure 6. Back cover disassembly .......................................................................................................... 19
Figure 7. Printer screw .......................................................................................................................... 19
Figure 8. Screenshot of the Apps .......................................................................................................... 21
Figure 9. Screenshot that shows the calculator program ..................................................................... 21
Figure 10. Screenshot that shows the printer options .......................................................................... 22
Hisense HK716 Series All-in-One POS System Integration ManualPage 5 of 22
List of Tables
Table 1. Port Descriptions ....................................................................................................................... 9
Table 2. HK716 series Connectors and Functions ................................................................................. 13
Table 3.Common Jumper Descriptions ................................................................................................. 14
Table 4. HK716 series Display description ............................................................................................. 14
Table 5. HK716 series Audio description ............................................................................................... 16
Table 6. HK716 series LAN ..................................................................................................................... 16
Table 7. HK716 series USB ..................................................................................................................... 16
Table 8. HK716 series Cash Drawer ....................................................................................................... 16
Table 9. HK716 series Power connector ................................................................................................ 17
Table 10. HK716 Specifications ............................................................................................................. 20
Hisense HK716 Series All-in-One POS System Integration ManualPage 6 of 22
Section 1. Introduction
Welcome to the Hisense family!
Welcome to the Hisense family! This Hisense HK716 Series All-in-one POS System Integration Manual provides steps to install and configure the Hisense HK716 Series All-in-One Point-of-Sale (POS) System. In order to install this successfully, you should have an understanding of different programming languages, computer networking, hardware components, application integration and POS systems.
Overview of the Hisense HK716 Series All-in-one POS System
Because we understand that processing sales transactions is an integral part of business, we’ve designed an all-in-one solution called the Hisense HK716 All-in-one POS System. The models have a 14” LED light display for the panel, an ARM processor for powerful speed and many other powerful features to meet the business needs of our customers.
Items that were packaged with the POS system
After you unpack the unit, check to ensure the following items are included inside the package:
HK716 POS system Power adapter Power cord
Contact information for questions
If any items are missing from the carton box or you have questions, contact Hisense via email or postal mail.
Email
Mailing Address
infopos@hisense.com
No.399, Songling Road, Laoshan District,
Qingdao,266101, China
Website address
http://hics.hisense.com
Required tools
You will need a Phillips screwdriver to disassemble the POS in order to access the motherboard
Hisense HK716 Series All-in-One POS System Integration ManualPage 7 of 22
Loading...
+ 15 hidden pages