Qingdao Hisense Intelligent Commercial System HK560 User Manual

HK560

User’s Manual

QingDao Hisense Intelligent Commercial System Co.,Ltd.

1

Document version 1.0

Safety Notices Before Installation or Use

Warning:

☆ It is required grounded well and the supply voltage shall be stable, and you must confirm that

the voltage of the outlet provides shall be in line with the voltage marked on the label of the
unit.

☆ Be sure not to sprinkle any liquid or fall any object into the unit.
☆ Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS.
☆ Do not switch on or off the host frequently, because it is easy to result in damage on the

machine.

☆ Be sure not to unplug or plug in any live part or external device when they are in energized

state, and the connecting cables of the POS between parts shall be connected securely.

☆ Be sure neither to lengthen cable nor to replace parts at your will, if you have any demand,

please contact with the reseller.

☆ The unit shall be used under dry, ventilated & clean environment away from sunlight. Avoid to

making the air vent of the host machine blocked or covered

☆ If any liquid sprinkles or any sundry falls into the unit, please shut it down immediately & switch

off power supply, take batteries down, dry the liquid or remove the sundry. If you take the
batteries down, you shall reset CMOS.

☆ In case of safety fault, such as peculiar smell, abnormal sound, leakage and other faults, you

must switch off the power supply at once and then contact with reseller.

☆ When inserting USB flash or disk, you shall kill virus to prevent the host machine from virus.
☆ The RJ11 port at the back of the host is connected with the cash drawer, as it is not a

communication port, users shall not use the port for dial-up networking.

☆ The product is a Level A one, it may cause radio interference in living environment. In such case,

users may need to take practical & feasible measures against the interference.

☆ When the POS is not in use, you shall switch off power supply.

1. Absolute Ratings of Environment：
Operating Temperature：0～40℃

Operating Humidity：10%～85%RH

Storage Temperature：-10～50℃

Storage Humidity：10%～90%RH

2. Main plug on the power supply was used as disconnected device. The socket

-outlet shall be installed near the equipment and shall be easily accessible

3. If any damage to the power supply or the equipment, please contact local
service person for help.

4. Static may damage to the integrated circuit in the host machine.

5. If a replaced battery is not right, this may cause explosion or serious

damage. Must replace the same type of batteries or similar ones recommended
by the manufacturer

6. Used only with attached AC/DC power supply.

The manufacturer has the right to modify the contents of the manual without prior notice!

Product standard NO：Q/0202 RSR527

Product standard Name: POS device

2

1. Applied range

The HK560 terminal adopt open operating system, flexible component structure and standard peripherals. The

products are suitable for the commercial enterprises, such as restaurants, supermarkets, and convenience stores to

Internet –connected use or stand-alone use. The main components are standard parts, so the quality of the

products is reliable, the system is easy to upgrade and the components are conveniently and easily maintained.

Reasonable price ratio makes it more competitive than similar products.

Specification ：

Item Description

Model HK560

CPU Intel Celeron J1900, Quad core CPU, clock speed 2.0GHz

em

Syst

Storage Flash Memory 3D NAND SSD,64GB up to 256GB

LCD Touch Panel

Memory DDR3L 1333Mhz ,2G, up to 8GB

LCD Size 15.6 inch

Resolution 1920×1080

Touch Screen capacitive true flat touch

Serial Ports 3* RJ48 COM(COM1-3); COM2 COM3 voltage is adjustable

USB 4* USB 2.0(3* on IO panel, 1*under side cover )

1*USB3.0 (on IO panel)

Powered USB 1* USB 2.0 ,24V, on IO panel

ts

I/O Por

Power Power Adapter Adapter (DC 24V, 2.5A)(Standard)

Peripheral

LAN 1 * RJ-45 (100M/1000Mbps Gigabit LAN)

Audio 1 * Line-out

Cash Drawer 1 * RJ-11 for cash drawer

Adapter(DC 24V, 5A)(optional)

VFD 2*20 characters

Second Display 15.6 inch (touch/non-touch)

10.1inch(touch/non-touch)

Printer Separate 80MM thermal printer

MSR card reader 3 Tracks

RFID card reader RFID (Supports MIFARE one and MIFARE CPU card)

Operating system Windows7/posready7/windows8.1/windows10/linux

3

2. I/O port view

V Power in 2、cash drawer(24V)

1、24

3、Powered USB(24V) 4、USB*2

5、USB*2 6、COM1

7、COM2 8、COM3

9、LAN 10、audio

3. Mainboard

Mainboard front layout:

4

Jumpers / Headers and Connectors

1

SYS_FAN1

System Fan Connector

2

CLR_CMOS1

CMOS Clear Jumpe

3

J_VGA1

VGA Pin Heade

4

J_COM4, J_COM5, J_COM6

COM4-6 Pin Headers

5

F_USB1

Front USB2.0 Pin Header1

6

J_PWRCOM4

COM4 VCC Select Jumpe

7

F_USB2

Front USB2.0 Pin Header2

8

F_USB3

Front USB2.0 Pin Header3

9

F_USB4

Front USB2.0 Pin Header4

10

F_PANEL1

Front Panel FPC Connector

11

J_RST1

System Reset Button Pin Header

12

J_MIC1

MIC Pin Header

13

J_SPK1

Amplifier Pin Header

14

R_USB4

USB2.0 TYPE-A Connector

15

S_ATA1

SATA2.0 Port (7+15P)

16

EDP1

EDP1 Signal Connector

17

EDP2

EDP2 Signal Connector

18

MINI_PCIE1

Mini PCI-E1

19

DIMM1

SO-DIMM DDR3L Slot

20

NGFF1

M.2 (NGFF) Key-B Slot (SSD, 2280)

21

DC_IN1

DC24V Power Input Connector (4Pin Jack)

22

RJ11_1

Cash Draw RJ11 Connector

5

Slot

23

R_USB1(R_USB5)

POWER USB 24V Key-2 Connector (USB2.0

TYPE-A Connector)

24

R_USB2

USB2.0 Dual TYPE-A Connector

25

R_USB3

USB3.0+USB2.0 TYPE-A Connector

26

COM1

COM1 RJ50 Connector

27

COM2

COM1 RJ50 Connector

28

COM3

COM1 RJ50 Connector

29

RJ45_1

LAN RJ45 Connector

30

PJ1

Line-out 3.5mm Jack

1 (EDP1 Signal Connector 40*1 Pin 0.50mm)

EDP

EDP2 (EDP2 Signal Connector 40*1 Pin 0.50mm)

6