Qingdao Hisense Intelligent Commercial System HK316 User Manual
HK316
User’s Manual
Document version 1.3
1
Warning:
1. Absolute Ratings of Environment：
Operating Temperature：0～40℃
Operating Humidity：10%～85%RH
Storage Temperature：-10～50℃
Storage Humidity：10%～90%RH
2. Main plug on the power supply was used as disconnected device. The socke
t-outlet shall be installed near the equipment and shall be easily accessible
3. If any damage to the power supply or the equipment, please contact local
service person for help.
4. Static may damage to the integrated circuit in the host machine.
5. If a replaced battery is not right, this may cause explosion or serious
damage. Must replace the same type of batteries or similar ones recommended
by the manufacturer
6. Used only with attached AC/DC power supply.
Safety Notices Before Installation or Use
It is required grounded well and the supply voltage shall be stable, and you must confirm that
☆
the voltage of the outlet provides shall be in line with the voltage marked on the label of the
unit.
☆ Be sure not to sprinkle any liquid or fall any object into the unit.
☆ Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS.
☆ Do not switch on or off the host frequently, because it is easy to result in damage on the
machine.
☆ Be sure not to unplug or plug in any live part or external device when they are in energized
state, and the connecting cables of the POS between parts shall be connected securely.
☆ Be sure neither to lengthen cable nor to replace parts at your will, if you have any demand,
please contact with the reseller.
☆ The unit shall be used under dry, ventilated & clean environment away from sunlight. Avoid to
making the air vent of the host machine blocked or covered
☆ If any liquid sprinkles or any sundry falls into the unit, please shut it down immediately & switch
off power supply, take batteries down, dry the liquid or remove the sundry. If you take the
batteries down, you shall reset CMOS.
☆ In case of safety fault, such as peculiar smell, abnormal sound, leakage and other faults, you
must switch off the power supply at once and then contact with reseller.
☆ When inserting USB flash or disk, you shall kill virus to prevent the host machine from virus.
The RJ11 port at the back of the host is connected with the cash drawer, as it is not a
☆
communication port, users shall not use the port for dial-up networking.
The product is a Level A one, it may cause radio interference in living environment. In such case,
☆
users may need to take practical & feasible measures against the interference.
When the POS is not in use, you shall switch off power supply.
☆
The manufacturer has the right to modify the contents of the manual without prior notice!
Product standard NO：Q/0202 RSR527
Product standard Name: POS device
2
Item
Description
Model
HK316
System
CPU
Cortex-A17 Quad core CPU, clock speed 1.8GHz
Memory
2G
Storage
Flash Memory
eMMC 16GB Nand Flash
LCD Touch Panel
LCD Size
15.6 inch
Resolution
1920×1080
Touch Screen
capacitive true flat touch
I/O Ports
Serial Ports
1* RJ48 COM(COM1);
USB
5* USB 2.0(4* on IO panel, 1*under side cover )
Micro USB
1* under side cover(for debug only)
TF card
1* under side cover
LAN
1 * RJ-45 (100M/1000Mbps Gigabit LAN)
Audio
1 * Line-out
Power out
24V for Printer
Cash Drawer
1 * RJ-11 for cash drawer
Power
Power Adapter
(DC 24V, 3.75A)/ (DC 24V, 5A)
Peripheral
Printer
Separate 80MM thermal printer
MSR card reader
3 Tracks
RFID card reader
RFID (Supports MIFARE one and MIFARE CPU card)
Operating system
Android 7.1
1. Applied range
The HK316 terminal adopt open operating system, flexible component structure and standard peripherals.
The products are suitable for the commercial enterprises, such as restaurants, supermarkets, and convenience
stores to Internet –connected use or stand-alone use. The main components are standard parts, so the quality of
the products is reliable, the system is easy to upgrade and the components are conveniently and easily
maintained. Reasonable price ratio makes it more competitive than similar products.
Specification ：
2. I/O port view
3
1
2 3 4 5 6 7 8
9
10
11
12
13
14
15
16
1、24V power input
2、Cash drawer interface
3、Serial port
4、printer 24V power
5、USB*2
6、USB*2
7、RJ45
8、Audio
9、Volume+ button
10、Volume - button
11、Brightness+ button
12、Brightness - button
13、TF card slot
14、Micro USB
15、USB
4
Ports
Interface
Item
1.CON25
Serial port wafer1.25 1*8pin x1set
MSR and RFID
2.CON65
Serial port 12PIN FPC socket
Power On/Off
3.CON4
Button board pin wafer2.0 2*6 pin x1set
Power On/Off
（reserved）
4.CON23 CON24
Serial port COM0 pin wafer2.0 2*5 pinx1set
Serial port COM2 pin wafer2.0 2*5 pinx1set
COM0
COM2
5.J8 J9
1*3 wafer2.0 jumpers x2set
6.CON5
12V power input
7.CON19
24V power output
8.J10
1*3 wafer2.0 jumpers x1set
9.CON31
MIC pin wafer2.0 1*2 pin x1set
MIC
10.CON18
Speaker pin wafer2.0 1*4 pin x1set
SPEAKER
11.CON61
Serial port 40PIN FPC socket
Expansion board
12.CON58
Speaker pin wafer2.0 1*4 pin x1set
Reserved SPEAKR
13.CON7
Serial port wafer1.25 1*5pin x1set
Reserved USB
14.CON8
Edp zero lift drag 40 pin x1set
Edp2 secondary
screen signal
15.CON9
Reserved HDMI
16.CON6
Edp zero lift drag 40 pin x1set
Edp1main screen
signal
17.CON2
RTC battery wafer1.25 1*2pin x1set
RTC
18.K1 K2 K3
3pin keyx3set
POWER RECOVERY
RESET
3. Mainboard
Mainboard front layout:
Ports and definition
5
Pin No.
Function
Pin No.
Function
1
NC
21
GND
2
GND
22
Enable
3
Lane1_N
23
PWM
4
Lane1_P
24
NC 5 GND
25
NC
6
Lane0_N
26
PWR
7
Lane0_N
27
PWR
8
GND
28
PWR
9
AUX_CH_P
29
PWR
10
AUX_CH_N
30
NC
11
GND
31
GND
12
VCC
32
GND
13
VCC
33
NC
14
NC
34
NC
15
GND
35
GND
16
GND
36
INT
17
HPD
37
RST
18
GND
38
SCL
19
GND
39
SDA
20
GND
40
VCC
Mainboard back layout
Edp1 interface definition
6
Loading...