Qiaohua SR 1 User Manual

USER MANUAL

SECURITY SENSOR LIGHT

MODEL NO.: QL-302S

It is very important to operate this product according to the following instructions. Failure

to do so may render your guarantee void.

CONTENTS

● 1 x Sensor Light ● 6 x Screws ● 1x Remote control ● 3 x Plastic screw ● 1x User

Manual

A B C D E F G

A,Main Light(Front Part) E, LED Light

B, Main Light(Back Part) F, Code matching button

C, Screw G, PIR Sensor area

D, Base

SPECIFICATIONS:

●Wireless Frequency:433.92MHz+100KHz

●Power Voltage: DC 6V

●Auto Shut off(seconds): 15S, 30S, 60S Selectable

●Battery: 4 × D Size 1.5V (Not included)

●PIR Detection Distance: 5-10M

●PIR Sensor Angle: 120°

●Brightness(lumens): 200 lumens

●Light Projecting Angle: 90°

●Range Adjustable Angle: 150°

●Coverage area: 380 sq.ft / 36 sq.meters

●IP Class: IP65

●Working temperature: -20°C(-4°F) to 50°C(122°F)

Remote control function

1. Remove all the components from packaging and saving packaging to store the sensor light

2. Install Batteries.

Quick Setup

when not in use. Please make sure that there are 1 x Security Sensor Light, 3 x Screws, 3 x

Plastic Plugs, 1x User Manual in the packaging.

1). Take apart the front and back main light at anti-clockwise direction, pull out of the front part,

and open up the battery cover. (Icon A, B, C,D,E)

A B C