Qiaohua FM400KR User Manual

400W Metal Fog Machine with

Wireless Remote Control Set

User Manual

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTION

CAUTION:

-Risk of burn, fire or electrical shock.

-For indoor use only.

-Please read instruction manual before using.

-Don’t immerse in liquid.

-Not for space heating purpose.

I. FOG MACHINE TECHNICAL SPECIFICATIONS

Item Code：5724042 Fuse: 5A, 125V
Model: FM400-E
Rating Voltage: AC120V, 60Hz
Power: 400W Tank Capacity: 0.55 Liter
Ambient Temperature: -10 ~ 45°C Dimensions: L236.5 × W147 × H194 mm

Preheat Time: 3~ 5 Minutes

Fog Output: 2,000 CFM

L9.3 × W5.7 × H7.6 inch

II. RECEIVER: TECHNICAL SPECIFICATIONS

Item Name: Receiver Model Number: QT-14R
Rating Voltage: AC120V, 60Hz

Working Current: 50mA Max.

III. TRANSMITTER: TECHNICAL SPECIFICATIONS

Item Name: Transmitter Model Number: QT-14T
Working Voltage: 12V DC
Require: 1 x 12V, 27A Battery (Included)

Working Current: 15mA Max.

WARNING:

To prevent risk of personal injury, fire, and electric shock:

● Never leave unit unattended while plugged in. Unplug when not in use.

● Read all important safety instructions and cautions.

● Connect only to a properly grounded outlet.

● Place product on a flat, level HARD surface and conn ect the cord to prevent the

product from overturning.

● For use only in covered areas. Keep unit dry, do not expose to rain or moisture. Do not

immerse unit.

● Leave enough space for good ventilation. Keep unit cool and away from other objects.

● Use only with SVI Fog Liquid (sold separately).

● Do not operate unit without fog liquid.

● Pour fog liquid carefully to avoid spills which could result in electrical shock. Do not use if

liquid spills onto unit. Let unit dry completely before plugging in.

● Do not overfill the liquid.

● Keep away from flames and flammable/explosive substances to avoid fire or explosions.

Never pour flammable liquids such as gas, perfume etc. into the fog machine.

● Keep product and fog liquid out of reach of children. Use only under adult supervision.

● Do not spray in the direction of flames or people. Stay at least 20 inches (50cm) from the

nozzle at the front of the unit.

● Do not obstruct the nozzle.

● Do not open unit. No user serviceable parts inside, please refer to your vendor. Only an

electrician can change the power cord.

● Clean unit before storage to avoid damages.

OPERATION INSTRUCTION:

1. Remove all packaging before use. NOTE: Please contact the store if you find any broken or
missing parts.

2. Place the unit on a flat, level surface.

3. Unscrew the lid on the reservoir tank towards the back of the Fog Machine and pour the Fog
Liquid inside. Do not spill Fog Liquid onto the unit. Do not overfill. If liquid gets into Fog
Machine, allow unit to dry completely before plugging in. Do not cut, pinch, or break the tube
connected through the tank lid. Close the lid to the reservoir tank tightly. Always make sure
there is enough Fog Liquid in the tank before using the Fog Machine.

4. Plug the Receiver into the back of the Fog Machine. Now connect the unit with the proper
power supply (120V AC).

5. Warm up time is approximately 3 - 5 minutes. When fully heated, the light on the Receiver
will turn on and the Fog Machine will be ready to produce fog.

6. Remove the battery’s insulating piece at the back of the Transmitter for the first time you
use it. You can see the “ON/OFF” buttons on the transmitter. Push “ON” to produce fog, and
press “OFF” to stop the flow of fog.

7. Unplug the unit before refilling the fog machine, and follow the directions in Step 3.

8. Unplug the unit when not in use.

A. Fog Machine
B. Receiver
C. Fog Liquid(not included)
D. Power Cable
E. Transmitter