QianChuan Smart Technology SS001KS User Manual

Wireless Light Switch-User Guide

Part Description

Quanity A Transmitter

1 B receiver

1

Introduction

Our wireless light switch gives you the comfort and convenience of switching your lights
on and off by radio frequency with a tap on the transmitter button on/off, enabled for
great ease of use and cost-saving.

Easy setup with the switch base adhering to the wall or other smooth surface through
the adhesive tape, no destroy on the wall to setup the Transmitter or wires to connect

the receiver.
Make the Transmitter match together with the Transmitter base or off by the magnetic
attraction, so the switch is portable, not have to be fixed on the wall and more
convenient to control the light.

Work with:LED lights,fluorescent lamp,CFL,filament lamp,tungsten lamp,halogen lamp etc.

Applications:

Retrofits, New Construction, Conference rooms, Classrooms, Lounges/Lobbies, Private Offices,

Executive Offices, Restrooms, Daycare facilities, Multimedia areas

Voltage Range

100-120 VAC,50/60Hz

Sensitivity

-109dBm

Rated Current

15A

Load Power

300W

Dimensions

Length: 2.374in. / 60.3cm

Width: 1.980in. / 50.3cm

Height: 0.967in. / 2.46cm

Working Type

Push-Button

Power Mode

Battery-Powered

Control Distance(Typically)

Up to 100ft. / 30m

Frequency Bands

915MHz

Switch Lifetime

>200,000 Times

Communication Mode

FSK

Emit Power

+10dBm

Operation Environmental

Temperature -25~50℃，Humidity

0~95%RH

Dimensions

Diameter Φ 2.759in. / 7cm

Height 0.63in. / 1.6cm

Technical Data(Receiver)

Technical Parameters(Transmitter)

Safety Information

WARNING! Turn OFF electrical power before installing or servicing this
product. Improper use or installation can cause SERIOUS INJURY, DEATH