Page 1
Qì Harmony User Manual
Radiant Heater with Heat Accumulator
Page 2
3
Manual de Usuario / Qì Harmony
Index
General specications of the heater
Parts or components of the heater
Installing the support base (with wheels)
Operating precautions
Instructions for use of the foldout hanger
Instructions for use of humidier
Operation of the heater
Description of the functions of the digital control panel
and control remote unit
Operation diagram
Safety precautions
Maintenance and storage
Specications
Precautions
Warranty policy
4
5
6
6
7
8
9
9
11
14
16
17
17
18
Qì Harmony User Manual
Radiant Heater with Heat Accumulator
Page 3
54
Qì Harmony / User Manual
Qì Harmony / User Manual
General specications of the heater
1.
This heater can generate heat quickly after turning it on and can
satisfy your needs immediately. It also has an integrated ceramic heat
accumulator that allows the thermostat to generate switching cycles
for lower energy consumption while the heater is operating. When
you turn the heater o, this ceramic body is capable of irradiating
heat during a long period of time so you can go on heating your
surroundings without consuming more energy.
2. It has safety protections: If the heater falls, it automatically turns o.
It has a thermal sensor to avoid overheating and a thermostat for
temperature control. It also has a control remote unit for remote
handling.
3. This heater has a double fold out hanger to dry clothes and/or damp
(not wet) towels.
4. It has a humidier incorporated to reduce the eects of dry air and
an ionizer that puries and refreshes your surroundings.
5.
It has a Phytotherapy thermal pillow for phytotherapeutic applications
and Moxa heat therapy
6. It has a support base with wheel for a convenient and comfortable
movement.
Parts or components of the heater
Diagram
Power
LCD Screen
Handle
Unit Panel
Remote Control
Towel Dryer
On/Off button
Ionizer
Wheels
Cable deposit
Control
Panel
Water Tank
(Humidier)
Wheel support
Phytobag
compartment
Page 4
76
Qì Harmony / User Manual
Qì Harmony / User Manual
Installing the support bases
1. Open the box, take out the unit and remove the protections. Make
sure that the unit is in perfect condition.
2. Turn the heater over leaving the base face up.
3. Fix the supports to the base with the corresponding xation screws.
Once you have done this, stand the heater up on its base and ensure
that the support has been correctly installed.
Precautions before using
1. Always place the unit in a stable position, and then insert the plug
securely into the electrical outlet.
2. Please do not connect the plug into the electrical outlet until you
have installed the support base and ensured it is properly installed.
3. Please always maintain the humidier water compartment with the
minimum amount of water required.
Instructions for use of the foldout hanger
1. Please fold out the clothes hanger before turning the heater on, if
you are going to use it to dry clothes.
2.
If you have not folded out the clothes hanger before turning the
heater on, please do not take them from the middle as you could
burn yourself.
3. Please do not hang heavy objects from the clothes hanger as you
may damage them or deform them.
4.
Please make sure that the clothes are not dripping wet before hanging
them on the clothes hangers.
5.
Please do not hang big objects (carpets, rugs, quilts, etc.) on the
clothes hangers as this will damage them and could cause accidents
if the heater falls over.
Attention: Because this heater has roll-over protection it will only operate
if it is standing on at and levelled oors. The heater also has a thermal
protection system that will be activated in case of overheating, turning the
heater o. The heater can only be turned back on again once it has cooled.
Page 5
98
Qì Harmony / User Manual
Qì Harmony / User Manual
Instructions for using the humidier
1. Remove the water compartment from the humidier.
2.
Fill the water compartment of the humidier (make sure that the level
of water is less than the maximum indicated to avoid spilling water).
Operation of the heater
To turn the heater on, press the power button. The unit will stay on hold.
To turn o, press the power button again.
Water compartment
(Humidier)
3.
Put the water compartment back into the humidier taking care
not to damage it.
4. Use only distilled or demineralised water.
Description of the functions of the digital
control panel and control remote unit
When the heater is turned on with the electronic control switch
marked On/O, you can choose this function by gently pressing this
button (Hold/Operating).
ON / OFF
When the unit is on hold it will start to operate emitting warm air when
you press the “On/O” button, and the corresponding light indicator
will turn on.
When the unit is operating, it will go on hold when you press the “On/
O” button, shutting down all operations and the corresponding light
indicator will turn o.
Page 6
1110
Qì Harmony / User Manual
Qì Harmony / User Manual
Speed
When operating manually you can choose the intensity of the heat
pressing repeatedly the VEL. button. This will allow you to quickly increase
the temperature and have direct control over the energy consumption
of the heater. The corresponding manual operating light indicator and
status bar will turn on. The sequence of intensities is as follows:
Automatic temperature control mode
(AI System)
When the heater is manually operated you can also choose the automatic
temperature control mode (electronic thermostat) by pressing the button
(AI). The corresponding manual operating light indicator and status bar
will turn on. The sequence of temperature is as follows:
The temperatures that can be selected are:
Please note: These are referential temperatures and can vary according
to the original temperature, dimensions, insulating conditions, air ows
and orientation of each room.
The heater will operate according to the room temperature obtained
by generating repetitive cycles of “on hold” and “operating” (Automatic
temperature control mode), to maintain an even temperature.
Operating diagram
Baja (B) Media (M) Alta (A)
17°C ~ 19°C 20°C ~ 22°C 23°C ~ 26°C
B M A
manual
cycle
( ) ( ) ( )
AI
T° Selec. +2°C
T° Selec. -2°C
T° Selec. (°C)
Medium
intensity
Low
intensity
On
hold
B
cycle
( )
A
( )
M
( )
(800W) (1400W) (2000W)
Page 7
1312
Qì Harmony / User Manual
Qì Harmony / User Manual
O-timer setting
By pressing this button ( Ap.Aut.) you can program when the heater will
turn o. This can only be done when the heater is operating.
The maximum period of time that the timer can be set at is 15 hours. The
sequence is as follows:
On-timer setting
By pressing this button (En. Aut.) you can program when the heater will
turn on. This can only be done when the heater is on hold.
The maximum period of time that the timer can be set at is 15 hours. The
sequence is as follows:
Ionizer
The Ionizer function (ION) is activated automatically when the heater is
turned on and can only be deactivated using the heater remote control unit.
The Ionizer emits a permanent ow of anions (negative ions) that reduce
the volume of positive ions (which are harmful to health) directly improving
the quality of the air and destroying the molecular composition of
microorganisms such as spores, bacteria and virus.
Phytotherapy + Moxa Heat Therapy
This equipment has a Phytobag, a small pillow lled with small quartz
stones impregnated in a solution of essential herbal medicines (absinth).
When in its recipient this pillow liberates a light herbal aroma with
phytotherapeutic properties. The pillow can also be taken out and used
for Moxa Heat Therapy. When the hot quartz stones come into contact
with neuralgic centers of the body they act as a natural analgesic.
2 H1 H 4 H
15 H
6 H
9 H
7 H
8 H
3 H 5 H
cycle
not programmed
2 H1 H 4 H
15 H
6 H
9 H
7 H
8 H
3 H 5 H
cycle
not programmed
Page 8
1514
Qì Harmony / User Manual
Qì Harmony / User Manual
Security precautions
• Make sure that the voltage in your house coincides with that indicated
on the heater name plate. Turn the heater o before disconnecting
the plug. Do not unplug with wet hands, this can produce an electric
shock or re.
• Before using, make sure that the heater´s power cord and plug are not
damaged. Do not pull or fold or change the power cord.
• If the power cord or plug should suer damage, they should only be
replaced by the manufacturer, authorized technical service centers or
qualied technical personnel to avoid dangerous situations.
•
This heater was not intended for use by children or persons with reduced
physical, sensory or mental capabilities or persons that do not have the
necessary experience or knowledge, unless they are under supervision or
are being taught how to use the heater by a person who is responsible
for their security
• Children should be supervised when near the heater and should not
play with the heater.
• The connect plug should only be plugged into a plug socket of the
same technical characteristics.
• Please do not use the plug if the heater has problems with overheating
or of another kind.
•
Please do not place the heater close to an electric plug as this can
cause an accident.
• Please do not move the heater or turn it around or upside down if there
are problems with overheating or of another kind.
• Please do not put your ngers or any other element into the holes of
the heater. This can cause accidents. Take special care with children,
older people and people with illnesses.
•
Please do not pull or move the heater using the power cable. It is strictly
prohibited to change the power cable as this can cause a serious accident.
• Please do not use volatile sprays on the heater, its packaging or any of
its protections. This can produce discoloration.
•
Never cover the heater or its air intake grilles as this causes the temperature
to rise, impedes its functioning and aects its performance.
•
Please do not use the heater when in movement or in unstable positions
as this can cause damage or breakage of parts and accessories, etc.
•
Please do not use the heater in places where there are inammable
elements or objects, explosives or in damp places (toilets, etc.), this can
cause r or electric shock that can ham people.
• Please maintain the heater at a 20 cm distance from walls, furniture or
other objects and do not cover the top of the heater or put underneath
furniture or low ceilings less than 1 meter higher than the heater, to
allow air to ow freely. Do not put objects on top of the heater as they
can cause damage when they fall.
• Does not use or store the heater in a dirty or damp place as this can
cause an electric shock.
Security precautions
Page 9
1716
Qì Harmony / User Manual
Qì Harmony / User Manual
•
Do nor use or store in places where the heater could fall. Remember that
any operating problems, poor appearance or damage to its parts and/or
accessories due to this, is not covered in the manufacturer´s Warranty.
•
Do not use the heater near elements or items that produce re (cookers,
heaters, ovens, etc.) or inammable agents as this can cause re or
other accidents.
Maintenance and storage
1. To clean and maintain this heater rst turn the heater o, unplug and
wait until it is cold.
2. Please clean the heater frequently so as to avoid discoloration and a
poor appearance.
3.
Please store the heater in its original packaging, storing parts and
accessories in their original places.
4. Please always store the heater in a dry place as damages to parts and
accessories due to dampness are not covered by the manufacturer’s
Warranty.
5. Please maintain the general appearance of the heater; it is important
that it always looks as if new.
6. Please clean the heater with a clean, damp and soft cloth.
7. Please never clean the heater directly with water or other liquids.
8. Please do not clean the heater with solvents, toluene, acid detergents,
kerosene, alcohol or chemicals as this discolours and deteriorates the
heater.
Specications
Precautions
1.
Smoke or strange odour can come from the heater when it is switched
on for the rst time. This is normal.
2.
Please do not use, under any circumstance the heater in the bathroom
or near a shower or swimming pool.
3. In case of over heating never cover the heater, case of over heating
never cover the heater; cut o the electricity or unplug the heater.
Security precautions
Model
Nominal
Voltage
Nominal
Frequency
Power
input
Qì Harmony 220V ~ 50Hz 800/1400/2000W
Page 10
1918
Qì Harmony / User Manual
Qì Harmony / User Manual
Warranty Policy
Dear Customer,
You have chosen a great quality product, with the appropriate support for its correct functioning. This is why we
are focused on addressing any technical assistance requirements in the most comfortable, quick and ecient way.
Your product’s warranty policy indicates the way the heater should be operated and the conditions that must be
met to request technical assistance, made payable to the after sales warranty given by Climo Chile S.A.
1 General Rules
Climo Chile S.A. (“Climo”) warranties repair of products that have been sold directly or through distributors in
Chilean territory and that present defects in functioning during its normal and household use.
This warranty covers exclusively manufacturing faults in the product and under no circumstances faults due to
incorrect use, incorrect installation or maintenance.
The warranty of each product is for a period of 1 year (12 months) on purchasing the product; Repair of the product
is free of labour charges and expenses for replacements or components needed to repair the product.
To request technical assistance covered by the warranty, the client must, on all occasions, present the following:
1. The receipt or invoice, which must clearly state the date of sale and the serial number or model of the
product.
2. The product warranty policy.
2 Terms of Warranty
1. All requirements for technical assistance under warranty must be made by calling at our telephone
number: 600-368-4433 or through our website http://www.qi-electric.com or visiting any Climo Authorized
Technical Support Center in Chile.
2. In both cases (requests for information) you will receive indications on how to proceed according to
the type of product that requires technical assistance. For heaters you should take the product to Climo
Authorized Technical Support Center.
3. For the warranty to apply and a technical solution for the product to be provided, the product must be
previously revised and diagnosed by a Climo Authorized Technical Support Center which should also issue
a technical report. Otherwise, the terms of warranty will not apply.
4. This warranty only covers the repair of the product and will not, under any circumstances, replace the
product or return the amount paid for the product, with the exception of cases established by the
Consumer Law N°. 19496.
5. This warranty is valid and eective only for new products and does not apply for second quality products,
second hand or restored products, etc.
6. The need for technical assistance in your home will be determined and carried out exclusively by Climo
Technical Service or its network of Authorized Technical Service Centers. The solution provided will be
according to the problem that the product presents.
7. The product may be repaired with replacements, components or accessories that are identical to or have
similar characteristics to the original, with previous authorization by Climo.
8. The repair service is totally free of charge if the product has manufacturing defects. If the product does not
have a defect or has a defect due reasons other than manufacturing defects, the Technical Service Center
can charge the client the amount associated to the cost of the service, according to service taris in force
on the date of service given.
This warranty is only valid in Chile and only covers products with model name and serial number that have been
imported and commercialized by Climo.
This warranty does not apply if the information on the documents given on purchase has been altered, is illegible
or if it is not presented when the technical assistance covered by the warranty is required.
Climo does not accept responsibility beyond that established in this warranty, and excludes any responsibility due
to incidental or consequential damages, unavailability of products or loss of data and/or software.
3 Warranty exclusions
This warranty does not include:
1. Instalment, maintenance, cleaning, revision and/or periodic controls of the product.
2. Inputs, decorations, supplies, plastic or metallic accessories, light bulbs and batteries used by the product.
3. Repair of product damaged by impacts or inappropriate storage, handling or transfer, insucient packaging
or intervention of the product by third persons without authorization by Climo.
4. Repair of products whose original components or accessories have been replaced or altered without
authorization by Climo or whose instalment, conguration or operation is faulty and has not followed
procedures specied in the User´s Manual for the product.
5. Repair of products due to faults produced by fortuitous events or force majeure, such as res, lightning,
weather phenomena, explosions, oods, spillage of liquids or other components in solid or gaseous form
that can damage them.
6. Repair of products in which foreign objects have been introduced and which have caused the damage or
malfunctioning of the product, or if the serial number has been altered or removed, or if they have been
disassembled, altered or intervened in any way by third parties without the authorization of Climo.
7. Repair of products that have been reconditioned, are second-hand or second selection.
8. Repair of products or any kind of compensation of products that have suered damages due to faulty
electric installations or lack of a protective grounding conductor, insucient or irregular power supply,
short circuits, over current or overvoltage in the power supply.
9. Compensation for incidental or consequential damages arising from the or incorrect use, such as food in
bad state, damage to clothes, damage due to loss of information, etc.
10. Repairs arising from fortuitous events or incident of force majeure.
Remember to read the User’s Manual before installing and using your product.
Page 11
Imported and distributed by Climo Chile S.A.
Av. Andrés Bello 2711, Oce Nº 2302, Las Condes. Santiago, Chile.
Telephone: (+56-2) 2378-8040 C.P. 7550611
Technical Service Center: 600-368-4433, from mobiles: (02) 2378-0630. soporte@sgservicios.cl
www.qi-electric.com
Loading...