QFX SBX-104 Operating Instructions Manual

SBX-104

* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure

can be used in portable exposure condition without restriction.

Content

Technical specifications

Instructions

1.The white RCA socket L is for LEFT channel input, the red RCA socket
R is for RIGHT

channel in put

2.The 3.5 line-in socket is for audio source from PC through 3.5 JACK input.

3.Please connect the system according to the diagram above and refer to
component

instruction when connecting.

4.Please do not plug the power cable before the connecting is finished.

5.Please raise the volume to what will be needed before starting the system.

6.Please make sure all cables are firmly connected, in case any looses,
no sound or

noise may takes place.

7.Please make sure the power is off when plug or unplug the power cord to
or from AC outlet.

Impedance: 4

Frequency response: 55Hz~20KHz(+1/-3dB)

S/N Ratio: 71dB

Harmonic distortion %: 1

Voltage

~120V/240V 50/60Hz

1

Content

1

Technical specifications

Safety Precaution

2

5

System connection

5

Operation

6

Instructions & Bluetooth Operation

4

Top panel functions and contro

3

Remote functions

Back panel functions and contro

4

Bluetooth Operation

1.Pls press the bluetooth key on remote or press the input key on
speaker panel, switch the speaker to bluetooth channel. When you
hear DingDong sound, the speaker work under bluetooth.

2.Press the mobile phone menu , open the bluetooth and scan the
device. When you find a QFX SBX-104 name, press match ,
then they will match automatically. Once it's succeed, you can play the music.

FM frequency: 87.50-108.00MHz