QFX PBX-12P Instruction Manual

!
!
!

VOLUME ADJUSTMENT DIAL

Twist the dial anticlockwise to decrease the volume and clockwise to
increase the volume.

MIC IN JACK

Plug in microphone directly for playing.

USB JACK

Insert USB card directly for playing!

!

LINE IN JACK

1. Connect an audio cable (not included) to the LINE IN JACK of the speaker and to
the audio output socket on the external audio devices such as MP3 player, discman,
etc,then select LINE by pressing the POWER/INPUT button on the front panel .

2.Play from an external audio device.

FM FUNCTIONS

1.Press POWER/INPUT to select FM radio

2.Press PLAY/PAUSE button on front panel for automatic searching and saving the
radio stations.
Press PREVIOUS/NEXT button to select a specific radio station.

Bluetooth:

Please press POWER/INPUT button on control panel to select Bluetooth mode.
Simultaneously open the Bluetooth setting on your phone, tablet or any other bluetooth
enabled audio device and select "QFX PBX-12P"(no need to match code),the unit and
device will then connected via Bluetooth. Press the "next song" and "previous song"
button on the control panel to select the song, press" play/pause" button to control the
playing status.

!
!
!
!
!
!
!
!
!
!

!
!
!
!
!

!

3

!

!
!
!
!

!

Instruction Manual

PBX-12P
PORTABLE BATTERY SPEAKER

Control Panel Function

1.LED Display

2.Volume Adjustor

3.Power/Input (Hold for 3 seconds to switch on/off the unit and mode selection for
Bluetooth,FM Radio,Line Input,USB)

4.Light (Light mode selection & switch on/off button)

5.Repeat

6.Mic Input

7.Line Input

8.USB Port

9.Charging Indicator
RED=Charging
GREEN= Full Charged

10.DC interface (9V)

11.Next track

12.Play/Pause (In FM mode,hold for 3 seconds the device will enter into automatic
scan)

13.Previous track

SPECIFICATIONS

Power Output: 10W
Frequency Response
for main speaker: 50Hz-20KHz
Power Supply: DC9V

1

POWER SOURCE

1.Please charge the unit at least 4 hours before first time using.

2.Long press the POWER/INPUT button on the panel to switch on or off the
speaker.

CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS lights red. After the battery
has fully charged, the light turns to be green.

1.Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into
a wall outlet.

2.When the battery is fully charged, first disconnect the AC adaptor from the
speaker, then from the wall outlet.

3.The speaker works normally when charging.

POWER/INPUT BUTTON
Press POWER/INPUT button on the front panel to select the mode(LINE,USB,BT
OR FM).

REPEAT FUNCTION

1.During playing status, press REPEAT button on the front panel once to repeat
playing the current track. To cancel the repeat option, press the REPEAT button
again.

2.REPEAT function only available for USB card playing modes(not for
Bluetooth/Line /FM).

RECORDER FUNCTION
Recording: Insert USB card, plug in microphone, long press REPEAT button on the
front panel, then the machine displays “rEC” to start recording, short press the
REPEAT button to stop recording and play the recording automatically, press
POWER/INPUT to return to USB card playing state.
Play the recording: Insert USB card, long press to play the recording file and
press Or button to select recording file.

PREVIOUS/NEXT BUTTON
By pressing PREVIOUS/NEXT button on the front panel ,you can select a specific
song from the play list.

PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the front
panel.
Press it once again to continue playing.

2