QERIDOO KidGoo2 – Q9000-S User Manual

User manual
This product fulfils all safety requirements of the European standard for bicycles and bicycle trailers (DIN EN 15918).
EN
KidGoo2 – Q9000-S
Certificates
The KidGoo2 has been tested and approved in accordance with the European Safety Standard EN 15918. It also fulfils all emissions limit values laid down in accordance with Part 3 of the toy safety standard EN 71.
Documentation
The statements in this documentation are not to be interpreted as an assurance of particular product properties. Despite the greatest care being taken to avoid technical inaccuracies or omissions, the possibility of these arising cannot be entirely excluded. When necessary, individual items of information can be changed quickly and without special notification.
This documentation can be ordered from Qeridoo GmbH in other languages, or is available for download on our website if already available. Visit us at: www.qeridoo.com
Copyright
All rights to the documentation remain with Qeridoo GmbH. Texts, values and illustrations may not be reproduced, distributed, used for competitive purposes
or passed on to others. If other product names are used in this documentation, these must normally be regarded as registered trademarks of the respective manufacturer.
Introduction 4
Proper use 4
Performance limits 4
Notes on the user manual 5
Safety instructions 6
Users 6
Conditions of use 6
Passengers 7
Towing vehicle (Trailer mode) 7
Maintenance and storage 7
Cycling with a trailer 8
Additional lanes 8
Additional weight 8
Defensive riding 8
Product overview 9
Scope of delivery 9
Components and control elements 10
Side view 10
Rear view 11
Accessories 12
Assembly 14
Unfolding the cabin 14
Installing wheel axle and push handle 14
Securing the wheel axle 15
Covering leaf suspensions 15
Fitting the wheel guard 16
Mounting the push handle 16
Relocating brake cable 17
Inserting the wheels 17
Tightening the backrest 18
Inserting the pennant 18
Optional assembly steps 19
Installing the buggy wheel 19
Mounting the tow bar 19
Mounting the coupler onto a bicycle 20
Installing optional accessories 21
Adaptor for baby seat of Class 0+ 21
Utilisation 24
Operating the brake 24
Braking during the journey 24
Using the parking brake 24
Adjusting the brake 24
Adjusting the push handle 25
Setting the mode 26
Adjusting the buggy wheel 26
Folding the tow bar in or out 27
Using the pennant 27
Folding up the push handle 27
Attaching the hand strap 27
Putting on the 5-point safety harness 27
Securing the load 28
Loading the baggage 28
Adjusting the safety harnesses 28
Embarking the child 29
Fastening in a child 29
Checking the weight distribution and tow bar load 30
Connecting the trailer to a bicycle 31
Using the comfort functions 32
Using the climate functions 32
Adjusting the suspension 33
Storage 34
Care and maintenance 35
Care 35
After every use 35
After use in harsh weather conditions 35
When not in use 35
Maintenance intervals 36
Before every ride 36
Monthly (or every 200 km) 36
Semi-annually (or every 500 km) 37
Every three years (or every 3000 km) 37
Appendix 38
Technical data 38
Warranty terms 39
Support information 39
Spare parts 40
KidGoo2 – Q9000-S Subject to change. – 05|2016 – 3
Contents
Introduction
Proper use
The KidGoo2 was designed as a bicycle trailer and comes with an additional buggy and walker function. For Trailer mode, use a tow bar with coupler to connect the trailer to a suitable towing vehicle (bicycle or motorised pedelec with a maximum speed of 25 km/h). With the buggy wheel attached, the KidGoo2 can be used as a child carrier in Buggy mode. In Walker mode you can use it when jogging or walking.
The KidGoo2 is for private transport only, carrying up to 2 children on paved routes. You can also carry baggage in the compartments intended for that purpose, provided that you observe the permissible weight limits and stow the baggage securely so that the load is evenly distributed.
During the journey, each child must be secured in the seat by a safety harness. If you are carrying only one child, you must alter the harness arrangement as per the instructions in the chapter
“Adjusting the safety harnesses” on page 28 so that the child is seated securely in the centre.
To safely transport a baby, use the separately available adaptor and install a baby seat of the class 0+.
The KidGoo2 fulfils all safety requirements of the European standard for bicycles and bicycle trailers (DIN EN 15918). Use as a bicycle trailer is permitted in darkness or in conditions of poor visibility only if a rear light conforming to the road traffic regulations has been retrofitted to the back of the trailer.
It must not be used on unsurfaced ground, to transport baggage in the passenger compartment, to carry animals or for commercial use. It is essential to observe the limit values specified in the chapter “Performance limits” on page 4 and to check them before every journey. In all cases, the rider of the combination or the person using it in Buggy or Walker mode is responsible for the proper use and roadworthiness of the KidGoo2.
Performance limits
The KidGoo2 can only be safely used if you observe and adhere to the following performance limits in every mode:
Requirements for passengers
Weights
Permissible total weight (KidGoo2 + children + luggage)
60 kg
Maximum weight per child 22 kg
Age
Minimum age (without baby seat) The child must be able to sit up independently. For children aged up to 18 months, we recommend using a comfort insert, see “Accessories” on page 12.
12 months
Minimum age (with baby seat) 1 month
Maximum age 6 years
Size
Maximum height 117 cm
Requirements for baggage
Storage space (behind the seat) 5 kg
Pouch for small items (under the push handle) 2 kg
KidGoo2 – Q9000-S Subject to change. – 05|2016 – 5
Introduction
The following additional restrictions apply to Trailer mode:
Requirements for the tow bar
Permissible tow bar load range (on the coupler pocket) 3 – 8 kg
Requirements for the towing vehicle
Vehicle type Bicycle (also recumbent bicycle), pedelec
(supported for up to 25 km/h)
Maximum permissible speed 25 km/h; in curves max. 7 km/h (walking
pace)
Rear wheel size 20" – 29"
Notes on the user manual
This user manual provides you with information about all technical and safety aspects that you require for mounting, using and maintaining the KidGoo2.
f Read the user manual in full. f Utilise the user manual to provide instruction for all users. f Always keep the user manual close to the KidGoo2.
The following typographical elements are employed in the user manual to indicate the possible danger sources or special information:
Danger!
Identifies notices pertaining to the Danger risk level. Indicates possible dangers that can result in injury if the instructions are not followed.
Caution!
Identifies notices pertaining to the Caution risk level. Indicates possible dangers that can result in material damage if the instructions are not followed.
Tip!
Identifies important information pertaining to the current subject. Indicates alternative actions, other information sources or helpful tips.
All stated positions (left, right, front, back, top, bottom etc.) refer to the perspective of a viewer standing behind the push handle and looking in the direction of travel. The tow bar is therefore in front, the push handle behind.
In this user manual, the word user refers to the person transporting children with the KidGoo2 and making the necessary adjustments on the vehicle.
Safety instructions
Danger!
Read the safely instructions below carefully. The safety and accident prevention regulations valid in your region and statutory rules
such as the road traffic regulations also apply, and take precedence in cases where there is doubt.
Make sure that the KidGoo2 is used only by suitable persons, as defined below. Users must have read and understood this user manual in full.
Caution!
The KidGoo2 is not a toy and must not be misused as such. This means that it is not permissible to attach the KidGoo2 to a child’s bicycle.
Users
 Users are defined as the following persons:
– Any person carrying out assembly work on the vehicle or changing the settings. – The rider of the towing vehicle in Trailer mode. – The operator in Buggy or Walker mode.
 The user must be at least 16 years old and mentally mature enough to operate the KidGoo2
and transport children.
 In Buggy mode, operation by a younger person is allowed if he/she is supervised by a person
who meets the requirements stated above.
 The user is at all times responsible for the proper use and roadworthiness of the KidGoo2.
Conditions of use
 The KidGoo2 must not be used for commercial or competitive purposes.  Before every journey, check that the KidGoo2 is in a proper and technically faultless condition.
Perform a visual inspection and in particular pay attention to the instructions and checklists in the chapter “Maintenance intervals” on page 36.
 Also inform yourself about country-specific rules and traffic regulations if you are making trips
across borders or if you want to take the KidGoo2 with you on trips abroad.
 Before every journey, make sure that the requirements for the particular mode have been
fulfilled. In particular, pay attention to the table and the instructions in the chapter “Setting
the mode” on page 26.
 In Trailer mode, a rear light conforming to the road traffic regulations must be retrofitted to
the back of the trailer for journeys in darkness or conditions of poor visibility.
 Before every journey, close the inner part of the 2-in-1 canopy so that the integrated insect
net protects the children from insects and small stones. When in traffic, the weather canopy should also be closed and the ventilation window open to provide protection against exhaust fumes.
KidGoo2 – Q9000-S Subject to change. – 05|2016 – 7
Safety instructions
Passengers
 The KidGoo2 can carry up to two children aged between 1 month and 6 years. Special
accessories must be used in order to secure children who are under 12 months old or who cannot sit upright independently, see “Accessories” on page 12.
 So that they have sufficient headroom in all situations, the children must not be taller
than 117 cm.
 Each child must be properly fastened in with a 5-point safety harness.  The children must wear bicycle helmets for every journey. This is also recommended for the
bicycle rider in Trailer mode in order to set a good example.
 Before each journey, explain to the children that they must behave appropriately. Undoing
safety harnesses, excessive rocking or leaning out must be strictly forbidden.
 Make sure that the cabin is well ventilated and make sure that the children are wearing clothes
appropriate for the weather conditions and the cabin’s inside temperature.
 Never leave children unsupervised in the KidGoo2 and make sure that they feel comfortable.  Make regular stops during longer journeys to give the children the opportunity to get out and
move around. Make sure that they drink sufficient liquids.
Towing vehicle (Trailer mode)
 As the towing vehicle, it is not permitted to use vehicles that must be registered such
as motorised e-bikes for speeds up to 45 km/h (known as S-pedelecs) or vehicles with a combustion engine.
 The bicycle or the pedelec (motorised for speeds up to 25 km/h) must be technically sound
and suitable for towing loads up to 60 kg. For details, read the towing vehicle’s manual or consult a specialist dealer for a suitable inspection to be carried out.
 Before every journey, test the function of the bicycle’s brakes, brake linings and tyres and
inspect them for wear. Check that the coupler is secure.
 For carrying passengers, the bicycle should be equipped with a rear-view mirror. Working lights
conforming to the road traffic regulations are mandatory for journeys in darkness or conditions of poor visibility.
Maintenance and storage
 Follow all instructions relating to the care and maintenance of the KidGoo2 and observe the
specified maintenance intervals, see “Care and maintenance” on page 35.
 Install and use only original accessories and spare parts manufactured or recommended by
Qeridoo. Using other products relieves the manufacturer of liability.
 Only carry out structural modifications or extensions to the vehicle which are necessary for
the use of the approved accessories in accordance with the assembly instructions. Any further manipulation that is not expressly approved by the manufacturer in writing relieves the manufacturer of liability in the event of accidents and defects.
 Follow the instructions in the chapter “Storage” on page 34 for storing the KidGoo2 properly
when it is not in use.
Safety instructions
Cycling with a trailer
The way in which the bicycle moves changes significantly when it is pulling a trailer, and this is particularly noticeable when braking and cornering. With regard to this, pay attention to the following:
 Practice cycling with the trailer before going out onto the road.  Do not carry children until you have familiarised yourself with the different riding behaviour on
suitable terrain.
 Think of the children’s safety whenever you ride. Always adapt your way of riding and your
speed to local conditions, and never forget that you are towing a trailer.
Additional lanes
 The two wheels of the KidGoo2 run outside the familiar cycling lane. On all routes, particularly
when there are obstacles and potholes, remember that you will always need 3 suitable lanes for safe riding.
 The KidGoo2 is 85 cm wide. Maintain a sufficient distance from obstacles and avoid routes that
are too narrow. Always negotiate narrow points and bends slowly.
 Combined, the bicycle and trailer are at least 2.5 m long in total. Negotiate curves with wider
radii than usual and bear in mind the additional lane required for the inner wheel of the
KidGoo2.
Additional weight
 When fully loaded, the KidGoo2 weighs up to 60 kg that in addition to its own weight and that
of the rider, the bicycle must pull, brake and keep on track:
– Jerky pulling and braking puts high loads on the coupler and tow bar, and thereby increases
wear.
– All stopping distances are much longer when braking, and the stress on the brake linings
is correspondingly greater. The stopping distance is further increased on wet surfaces and downhill slopes.
– During braking, especially on bends, the trailer can swing out or push the bicycle’s rear
wheel to the side and reduce its traction.
– High centrifugal force on bends can result in the trailer tipping over.
 Do not exceed the maximum permitted speed of 25 km/h and avoid riding at an angle.  Negotiate bends no faster than at walking pace (max. 7 km/h) in order to prevent excessive
centrifugal forces.
Defensive riding
 Always ride defensively and with foresight.  Brake in good time before reaching bends, junctions, obstacles etc.  Always negotiate curbs and uneven surfaces slowly. Keep away from steps, escalators and very
steep stretches.
KidGoo2 – Q9000-S Subject to change. – 05|2016 – 9
Product overview
Scope of delivery
The scope of delivery includes some functional units of the KidGoo2 already preassembled.
f Unpack all supplied parts and place these on a clean surface. f Check the contents of the package against the list provided.
Caution!
Contact our Service department immediately if any parts are missing or if you find that the packaging or product is damaged, see “Support information” on page 39.
f Remove the packaging material and all protective caps, and dispose of them in accordance
with the environmental guidelines that apply in your region.
f Read the chapter “Assembly” on page 19 before you assemble parts.
1 Cabin with seats, back pad and 5-point
safety harnesses
2 Wheel guard (2x) 3 Push handle with hand strap and brake
lever
4 Wheel axle with disc brake system and
adjustable suspension
5 Brake cable 6 Pennant with 2-part pennant staff and
centre piece
7 2 head rests 8 Sun visor 9 Tow bar with coupler and retaining strap
10 2 leaf suspension covers with imprinted
adjustment scale
11 Buggy wheel (in 2 parts with quick-release
clamp)
12 2 wheels (20" with push-in axle and
2 spoke reflectors on each)
Components and control elements
Side view
1 Cabin (frame made from aluminium tubes
with weatherproof fabric cover)
2 Side window (right, incl. ventilation
window)
3 Canopy with insect, rain and sun cover;
window film can be rolled up; removable sun visor
4 Seat with 5-point safety harnesses, head
rests and back pad
5 Reflective seams in the fabric cover 6 Brake cable branch, adjustable 7 20" wheel with push-in axle, air valve
(Schrader valve) and spoke reflector (orange)
8 Rubber cap for push-in axle release when
mounting the wheels
9 Wheel axle with disc brake system and
adjustable suspension
10 Wheel guard for deflecting obstacles 11 Tow bar for Trailer mode (folded in) 12 Tow bar holder on the cabin frame with
cotter pin fastening
13 Harness fastener of canopy 14 Buggy wheel for three-wheel use in Buggy
or Walker mode
15 Mode switch:
Buggy mode: Wheel turnable Walker mode: Wheel running straight Trailer mode: Buggy wheel removed
16 Wheel mount on the cabin frame 17 Front reflector, white
Product overview
KidGoo2 – Q9000-S Subject to change. – 05|2016 – 11
Product overview
Components and control elements
Rear view
1 Pushbutton for adjusting the height of the
push handle (both sides)
2 Push handle with safety function as
roll-bar
3 Hand strap for Buggy and Walker mode 4 Brake lever, lockable 5 Quick-release clamp for securing the push
handle (2x)
6 Ventilation window, can be rolled up 7 Storage space cover with two pouches
for small items (max. 2 kg baggage)
8 Harness to open the storage space cover 9 Loop to fasten the brake cable (2 in total)
10 Storage space with inside pocket,
accessible from the outside (max. 5 kg baggage)
11 Rear reflector, red 12 Wheel axle 13 Coupler pocket with cotter pin fastening
and impact damper, also retaining strap for securing the tow bar on the bicycle frame
14 Disk brake system 15 Reflective seams in the fabric cover 16 Brake cable to disc brakes on the wheel
axle
17 Pennant pouch for holding the pennant
staff (inside)
Product overview
Accessories
Using the accessories listed here, you can extend your KidGoo2 and optimally adapt it to suit your needs and the age of your children:
Coupler
Art. no.: K-587K
Rear light, battery operated
Art. no.: FK589
Jogger air wheel with hand brake
Art. no.: 8956-14
Jogger air wheel without brake
Art. no.: 7776-14
Adaptor for baby seat (Class 0+)
Art. no.: AD-800
Baby seat (Class 0+)
Art. no.: 1298
Baby seat
Art. no.: 12578
Baby seat, variable-length
Art. no.: BS.04.013.00
KidGoo2 – Q9000-S Subject to change. – 05|2016 – 13
Comfort insert
Art. no.: S-58697
Seat cushion
Art. no.: SI-5555
Rain cover
Art. no.: JR-8-1
Folding garage
Art. no.: 035689
You can find our current list of dealers on the Internet at:
http://qeridoo.com/index.php/en/haendlersuche-english
Product overview
Assembly
Below you can read all the information that you will need to assemble your KidGoo2 properly.
f Make sure that you have sufficient space to assemble it.
Also pay attention to the door width at the place of installation: The KidGoo2 is 85 cm wide with the wheel guards fitted.
f Have a size 4 hex key and a medium-sized Phillips screwdriver to hand (not supplied). f Perform each of the instructions step by step.
f If necessary, follow the QR code to call up a video about
assembly and operation on the Internet. Using the
Jumbo 1 Kid as an example, the video shows a few functions
that also apply to the KidGoo2:
Danger!
Never perform assembly work if there are children in the cabin. Keep children away from the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not get trapped.
Unfolding the cabin
f Place the collapsed cabin in the assembly area. f Position yourself behind the cabin. f Pull both sides of the rear cabin frame all the way up. f Open the storage space cover.
f Pull the lower horizontal bar backwards evenly until
the two red locks on the left and right engage audibly.
Installing wheel axle and push handle
Caution!
In the as-delivered state, the wheel axle and the push handle are connected via the brake cable. To avoid damaging it, you should place the push handle on the floor behind the cabin when assembling the wheel axle.
Loading...
+ 30 hidden pages