BEDIENUNGSANLEITUNG
USER MANUAL
MODE D‘EMPLOI
www.geo-fennel.de
www.geo-fennel.com
www.geo-fennel.fr
DE | EN | FR
Geo3P
8
EN
Dear customer,
Thank you for your confidence in us having purchased a geo-FENNEL instrument.
This manual will help you to operate the instrument appropriately.
Please read the manual carefully - particularly the safety instructions. A proper use only guarantees a
longtime and reliable operation.
geo-FENNEL
Precision by tradition.
Contents
1. Supplied with
A
2. Features
B
3. Operation
C
4. Safety notes
D
• Self-levelling 3 Point Laser Geo3P
• Multi-functional mount
• Magnetic target
• 3 x AA Alkaline battery
• Padded carrying case
• User manual
SUPPLIED WITH
A
FUNCTIONS
For easy plumbing from the floor to the ceiling. 3 laser points at right angles.
9
EN
FEATURES
B
Technical data
Self-levelling range ±3,5°
Accuracy ± 2 mm / 10 m
Working range 30 m*
Laser diode 635 nm
Laser class 2
Power supply 3 x AA Alkaline batteries
Operating time 20 h
Temperature range -10°C to +50°
Protection class IP 54
Weight (instrument only) 0,5 kg
*depending on the room illumination
1. Laser emitting window
2. ON/OFF knob
3. 1/4“ thread for camera tripod
4. Battery compartment cover
5. 1/4“ adaptor
6. Magnets
7. 5/8“thread for builder‘s tripod
8. Magnets
9. Slits for fixing belts
10. Hanging hole
11. Screw for fixing the instrument on the multifunctional mount.
Hanging hole
Belt slot
8
10
11
9
1/4″Screw
1/4″5/8″Screw
6
7
5
4
1
3
2
10
EN
Insert the batteries
• Open the battery compartment cover (4) and insert
3 x AA Alkaline batteries (ensure correct polarity).
Close the battery compartment cover. The flashing
ON/OFF LED shows that the batteries have to be
replaced.
• Power on the instrument with the ON/OFF knob (2).
• 3 laser points will be projected simultaneously (up, down, forward).
• A visual (blinking laser points) and audible alarm indicates that the unit was set up outside of the
compensator range. Set it up on a more even surface!
• Geo3P can be connected to a camera tripod or a floor-to-ceiling pillar by means of the
1/4“ thread (3).
MULTI-FUNCTIONAL MOUNT
Connect Geo3P to the multi-functional mount. Now it can be
connected to a builders‘ or elevating tripod by means of the 5/8“
thread.
The multi-functional mount offers various possibilities of use.
Attach it to metal parts by use of the incorporated
magnets.
OPERATION
C
11
EN
ACCURACY CHECK
Set up instrument parallel to a wall at a distance of 10 m. Switch the instrument on.
Mark a visible laser point “A” at the wall. Turn the unit by 90° to the right and mark laser point „B”. Turn
the instrument by 180° to position “B” and mark laser point “C”.
The horizontal deviation of the 3 marked points A, B and C must not exceed 4 mm.
If the deviation exceeds 4 mm the instrument is out of tolerance. In this case please contact
an authorized workshop.
Fix it to horizontal or vertical frames, poles, pipes, ... by
use of the fixing strap.
Fix the instrument to a nail / screw with the hole of the multi-functional mount.
EXAMPLE OF APPLICATION
12
EN
D
SAFETY NOTES
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows; after the instrument has been dropped
or hit. Please check the accuracy.
Large fluctuation of temperature: If the instrument will be used in cold areas after it has been stored in warm areas (or
the other way round) please wait some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems); will be
disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio transmitters).
CE-CONFORMITY
The instrument has the CE-mark according to EN 61326:1997, EN 55022, EN 61000-4-2/-3.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any use. If necessary damp the cloth with
some water. If the instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original
container / case only.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to be free from defects in material and
workmanship under normal use for a period of two (2) years from the date of purchase. During the warranty period,
and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at manufacturers
option), without charge for either parts or labour. In case of a defect please contact the dealer where you originally
purchased this product. The warranty will not apply to this product if it has been misused, abused or altered. Without
limiting the foregoing, leakage of the battery, bending or dropping the unit are presumed to be defects resulting from
misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITY
1. The user of this product is expected to follow the instructions given in the user manual. Although all instruments
left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the
product’s accuracy and general performance.
2. The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or
misuse including any direct, indirect, consequential damage, and loss of profits.
3. The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits
by any disaster (earthquake, storm, flood etc.), fire, accident, or an act of a third party and/or a usage in other
than usual conditions.
4. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to
a change of data, loss of data and interruption of business etc., caused by using the product or an unusable
product.
5. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused
by usage other than explained in the users‘ manual.
6. The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or
action due to connecting with other products.
13
EN
SAFETY INSTRUCTIONS
· Follow up the instructions given in the user manual.
· Do not stare into the beam. The laser beam can lead to eye injury. A direct look into the beam (even from greater
distance) can cause damage to your eyes.
· Do not aim the laser beam at persons or animals.
· The laser plane should be set up above the eye level of persons.
· Use the instrument for measuring jobs only.
· Do not open the instrument housing. Repairs should be carried out by authorized workshops only. Please contact
your local dealer.
· Do not remove warning labels or safety instructions.
· Keep the instrument away from children.
· Do not use the instrument in explosive environment.
· The user manual must always be kept with the instrument.
LASER CLASSIFICATION
The instrument is a laser class 2 laser product according to DIN IEC 60825-1:2014.
It is allowed to use unit without further safety precautions.
Eye protection is normally secured by aversion responses and the blink reflex.
The laser instrument is marked with class 2 warning labels.
Please note:
If you return instruments for repair / for adjustment to us please disconnect batteries or rechargeable batteries
from the instrument - this is for safety reasons!
Thank you.
INTENDED USE OF INSTRUMENT
The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on the instrument): Setting up heights, horizontal and vertical planes, right angles.
LASER RADIATION
DO NOT STARE
INTO BEAM
LASER CLASS 2
Max. output power
<1mW @ 635 - 670 nm
Laser class 2
DIN EN 60825-1:2014
geo-FENNEL GmbH
Kupferstraße 6
D-34225 Baunatal
Tel. +49 561 / 49 21 45
Fax +49 561 / 49 72 34
info@geo-fennel.de
www.geo-fennel.de
Technische Änderungen vorbehalten.
All instruments subject to technical changes.
Sous réserve de modifications techniques.
Precision by tradition.
01/2016
Loading...