QEES 313-AEW-A1, 313-BEW-A1, 313-ALW-A1, 313-BLW-A1, 313-GLW-A1 Quick Manual

EN

Download complete manual on

www.qees.eu/en/support/plugin

Quick Guide

QEES RETO Plug-in Switch Standard
QEES RETO Plug-in Dimmer Standard
QEES RETO Plug-in Switch Plus
QEES RETO Plug-in Dimmer Plus

QEES product references covered by this Quick Guide:

313-AFW-A1
313-ALW-A1
313-AEW-A1
313-ABW-A2

313-BFW-A1
313-BLW-A1
313-BEW-A1
313-BBW-A2

313-GFW-A1
313-GLW-A1
313-GEW-A1
313-GBW-A2

313-HFW-A1
313-HLW-A1
313-HEW-A1
313-HBW-A2

Going Green with QEES

Congratulations on your new QEES RETO Plug-in. You can
now wirelessly control your appliances or lighting equip­ment while metering their power consumption*.

All QEES Z-Wave® products are Z-Wave-certied. This
ensures interoperability with Z-Wave-certied products from
other manufacturers.

Read more on how your QEES product can help you go
green at www.qees.eu.

*metering available for Plus edition devices only

QEES Green Living Solution™

RETO Plug-in provides an elegant, efcient and energy-sav­ing way of controlling your exisiting electrical equipment.

RETO Plug-in Switch can control practically all electrical
products and help reduce your power consumption*, it can
be controlled manually or by remote.

RETO Plug-in Dimmer is a universal dimmer (UNI) capable
of controlling practically all dimmable loads: Energy saving,
LED, halogen and incandescent light bulbs.

Power Plug QEES RETO Plug-in Connected Product

This guide describes the
installation of RETO Plug-in
Switch and RETO Plug-in
Dimmer.

1

Installation

Plug your RETO Plug-in
into an existing wall socket
outlet. The LED will ash
blue while it searches for a
Z-Wave network.

3

Plug the appliance to be
controlled into your RETO
Plug-in.

RETO Plug-in Dimmer is
to be connected only to
dimmable loads.

1

If the connected product
has a separate switch or
on/off-button, please make
sure that it is switched
on.

2

The following guide de­scribes how to set up and
control your RETO Plug-in
with your MyKey.

Should you have another
Z-Wave controller, please
consult its manual for
conguration.

Press three times quickly
on the button you want to
control the device with –
the LED ashes blue.

Then press RETO Plug-in
product three times quickly
– the LED ashes blue and
it begins linking.

After successful linking
between MyKey and your
RETO Plug-in, both LEDs
will light green for 2
seconds.

2

Conguration

1 2 3

You can control several
products from the same
button on the MyKey. In
order to do so, repeat
conguration steps 1-3.

Your product can now be
controlled by your QEES
MyKey. A short button
press will toggle it; a long
press will dim lights up or
down (applies only to QEES
Dimmers).

Repeat conguration steps
1-3 to congure more
products on your MyKey’s
other buttons.

4 5 6

You can delete a link to a
product from a button on
MyKey. Refer to the online
manual for a complete
description on how to
perform network actions.

7

You can restore the default
settings by pressing four
times quickly - the LED lights
blue. Then press three times
quickly - the LED lights red.
Then hold the button until
the device lights green.

You can learn more about
advanced features like
the timer function, watch
instructional videos and
get conguration advice
for your products at
www.qees.eu/en/video.

Scan the QR code to learn
much more about the pos­sibilities that your product
has to offer. Download
the product manual at
www.qees.eu/en/support/
plugin.

8 9 10

This Quick Guide covers RETO
Plug-in Switches and RETO Plug-in
Dimmers with socket outlet types
for several European countries
as well as the United States.
However, for ease of reference
only RETO Plug-in Switch or RETO
Plug-in Dimmer with the Schuko
socket type is depicted in this
Quick Guide.

FREU USIT

QEES RETO Plug-in Switch:

Supply Voltage: 100-240 VAC - 50-60 HZ

Standby power: 0,3W

Rated power: Max. 16 A resistive load, 3680 W/230 VAC When using
other type of loads, please refer to the online manual.

Protection rating: IP 20 - Only for indoor use.

Rated current: Max. 16 A

Other: For more information, please refer to the online manual.

QEES RETO Plug-in Dimmer:

Supply voltage: 100-240 VAC - 50-60 HZ

Standby power: 0,4W

Rated power: 400 W/230 VAC - 190W/110VAC When using other
type of loads, please refer to the online manual.

Protection rating: IP 20 - Only for indoor use.

Rated current: Max. 1.66 A

Other: For more information, please refer to the online manual.

This product is made in the China and meets the requirements
for CE marking in accordance with directive 89/336/EEC, 99/05/
EEC, 2006/95/EC and 2011/65/EU.

WEEE

The Waste Electrical and Electronic Equipment Directive

.
The product is marked with the crossed out wheelie bin, and
electronic equipment must not be disposed with other house­hold waste, but must be collected separately.

3

Technical

specication