QDI QD15XL13 Specification

Global LCD Panel Exchange Center
Quanta Display Inc
Quanta Display Inc
www.panelook.com
Quanta Display Inc.
SPECIFICATION
QD15XL1301 Page
Doc No. QD15XL1301
Doc. REV.: 01
Issue Date:05/12/2005
RoHS compliant
1/21
Specification for TFT LCD Module
Model No.
QD15XL13 Rev.:01
Approved By
Quanta Display Inc.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Quanta Display Inc
These specification sheets are the proprietary product of Quanta Display Inc. (”QDI”)
and include materials protected under copyright of QDI. Do not reproduce or cause any third
party to reproduce them in any form or by any means, electronic or mechanical, for any
purpose, in whole or in part, without the express written permission of QDI.
The device listed in these technical literature sheets was designed and manufactured for
use in OA equipment.
In case of using the device for applications such as control and safety equipment for
transportation (aircraft, trains, automobiles, etc. ), rescue and security equipment and
various safety related equipment which require higher reliability and safety, take into
consideration that appropriate measures such as fail-safe functions and redundant system
design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as
QD15XL1301 Page
2/21
aerospace applications, telecommunication equipment (trunk lines), nuclear power control
equipment and medical or other equipment for life support.
QDI assumes no responsibility for any damage resulting from the use of the device which
does not comply with the instructions and the precautions specified in these technical
literature sheets.
Contact and consult with a QDI sales representative for any questions about this device.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Quanta Display Inc
REV. Date ECN NO. Change Content
00
04/22/2005
01
05/12/2005
Revision History
N/A Specification Initiate
N/A P.21 drawing revise
QD15XL1301 Page
3/21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
×3×
www.panelook.com
Quanta Display Inc
1. Application
This specification applies to a color TFT-LCD module, QD15XL13.
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT
(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit
and power supply circuit and a backlight unit. Graphics and texts can be displayed on a
1024
S
ignaling) to interface and supplying +3.3V DC supply voltage for TFT-LCD panel driving
and supply voltage for backlight.
The TFT-LCD panel used for this module has very high aperture ratio. A low-reflection and
higher-color-saturation type color filter is also used for this panel. Therefore, high-
brightness and high-contrast image, which is suitable for the multimedia use, can be
obtained by using this module.
Optimum viewing direction is 6 o'clock.
768 dots panel with 16.2M colors by using LVDS (L
QD15XL1301 Page
ow Voltage Differential
4/21
[Features]
1) High aperture panel; high-brightness or low power consumption.
2) Brilliant and high contrast image.
3) Small footprint and thin shape.
4) Light weight.
5) Interface 6bit + FRC
6) RoHS compliant
3. Mechanical Specifications
Parameter Specifications Unit
Display size 15” Diagonal inch
Active area 304.1X228.1 mm
Pixel format 1024 (H)×768 (V) Pixel
(1 pixel = R+G+B dots)
Pixel pitch 0.297 (H) × 0.297 (V) mm
Pixel configuration R,G,B vertical stripe
Display mode Normally white
Unit outline dimensions (typ.)*1 326.5(W)×253.5 (H)×11(D) mm
Mass Max. 950 g
Surface treatment Anti-glare and hard-coating 3H
*1.Note : excluding backlight cables. Outline dimensions is shown in this specification
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
【 【
www.panelook.com
Quanta Display Inc
4. Input Terminals
4-1. TFT-LCD panel driving CN1 ( 1 channel, LVDS signals – NSC/Ti standard and +3.3V DC power supply)
Using connector: DF14H-20P-1.25H (Hirose)
Interface Cable Pin Assignments
PIN NO . SYMBOL FUNCTION
1 VDD Power Supply, 3.3 V (typical)
2 VDD Power Supply, 3.3 V (typical)
3 GND Ground
4 GND Ground
5 RxIN0- LVDS Receiver IN0- Signal
6 RxIN0+ LVDS Receiver IN0+ Signal
7 GND Ground
8 RxIN1- LVDS Receiver IN1- Signal
9 RxIN1+ LVDS Receiver IN1+ Signal
QD15XL1301 Page
5/21
10 GND Ground
11 RxIN2- LVDS Receiver IN2- Signal
12 RxIN2+ LVDS Receiver IN2+ Signal
13 GND Ground
14 RxCLKIN- LVDS CLOCK - Signal
15 RxCLKIN+ LVDS CLOCK + Signal
16 GND Ground
17 RxIN3- LVDS Receiver IN3- Signal
18 RxIN3+ LVDS Receiver IN3+ Signal
19 GND Ground
20 GND Ground
Note 1】Relation between LVDS signals and actual data shows below section (4-2).
Note 2】The shielding case is connected with signal GND.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
6/21
.
B
GVDD/GVEE
VDD
DVDD Gamma
COM/CS
Control Signals
DD
S1
S3840
G1024G1
S3074
QD15XL1301 Page
www.panelook.com
Source Driver
LCD Panel
-
TFT
www.panelook.com
Gate PC
FPC Connector Gate Driver
Global LCD Panel Exchange Center
Quanta Display Inc
4-2 Interface block diagram
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
User
com/CS Driver
Gamma Generator DC-DC Converter
LVDS & Timing
Controller (87346)
Control & Source PCB
Global LCD Panel Exchange Center
℃ −
〜 +
〜 +
〜 +
【 【
www.panelook.com
Quanta Display Inc
4-3. Backlight driving
CN2 (connector): BHR-03VS-1(JST)
Mating connector:SM02(8.0) B-BHS-1(JST)
Pin No. Symbol Function
1
Power supply for lamp
HIGH
(High voltage side)
2NC
3
Power supply for lamp
LOW
(Low voltage side)
5. Absolute Maximum Ratings
5-1 LCD module
Parameter Symbol Condition Ratings Unit Remark
Input voltage
V
I Ta=25
0.3〜 Vcc+0.3
QD15XL1301 Page
Note1
7/21
+3.3V supply voltage Vcc Ta=25℃ 0
Storage temperature Tstg
Operating temperature (Ambient) Topa
Note1】LVDS signals
Note2】Humidity:95%RH Max. at Ta≦40℃.
25
0
Maximum wet-bulb temperature at 39
No condensation.
4
60
50
or less at Ta>40℃.
Note2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ 14 hidden pages