Page 1
Global LCD Panel Exchange Center
( ) Preliminary Specifications
(V ) Final Specifications
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B121EW06 V1 (QD12TL02 Rev.03)
Module
Model Name
Customer Date
Checked &
Approved by
12.1” WXGA Color TFT-LCD
B121EW06 V1 (QD12TL02 REV.03)
Approved by Date
Prepared by
Note: This Specification is subject to
change without notice.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
MDBU Marketing Division /
AU Optronics corporation
www.panelook.com
Page 2
Global LCD Panel Exchange Center
QD12TL0203 Page 1/26
These specification sheets are the proprietary product of AUO and include materials
protected under copyright of AUO. Do not reproduce or cause any third party to reproduce
them in any form or by any means, electronic or mechanical, for any purpose, in whole or in
part, without the express written permission of AUO.
The device listed in these technical literature sheets was designed and manufactured for use
in OA equipment.
In case of using the device for applications such as control and safety equipment for
transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various
safety related equipment which require higher reliability and safety, take into consideration
that appropriate measures such as fail-safe functions and redundant system design should
be taken.
www.panelook.com
Do not use the device for equipment that requires an extreme level of reliability, such as
aerospace applications, telecommunication equipment (trunk lines), nuclear power control
equipment and medical or other equipment for life support.
AUO assumes no responsibility for any damage resulting from the use of the device, which
does not comply with the instructions, and the precautions specified in these technical
literature sheets.
Contact and consult with a AUO sales representative for any questions about this device.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
QD12TL0203 Page 2/26
REV. Date ECN NO. Change Content
0 6/30/2005 N/A Preliminary Specification Initiation
www.panelook.com
Revision History
1 8/29/2005 NA
2 9/04/07 NA
Updated Current Dissipation
Update to AUO Coverpage
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
3
QD12TL0203 Page 3/26
1. Application
This specification applies to a color TFT-LCD module, QD12TL0203.
2. Overview
This module is a color active matrix LCD module incorporating amorphous silicon TFT
(Thin Film Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit,
power supply circuit and a backlight unit. Graphics and texts can be displayed on a 1280
800 dots panel with 262,144 colors by using LVDS (Low Voltage Differential Signaling) to
interface and supplying +3.3V DC supply voltage for TFT-LCD panel driving and supply
voltage for backlight.
The TFT-LCD panel used for this module has very high aperture ratio. A low-reflection
and higher-color-saturation type color filter is also used for this panel. Therefore, highbrightness and high-contrast image, which is suitable for the multimedia use, can be
obtained by using this module.
www.panelook.com
Optimum viewing direction is 6 o'clock.
[Features]
1) High aperture ratio, high-brightness.
2) Brilliant and high contrast image.
3) Small footprint and thin shape.
4) WXGA resolution (800 vertical by 1280 horizontal pixel array).
5) LVDS interface.
6) Low power consumption.
7) RoHS compliant
3. General Specifications
Parameter Specifications Unit
Display size 12.1” Diagonal in
Active area 261.12 (H)×163.2 (V) mm
Pixel format 1280 (H)800 (V) Pixel
(1 pixel = R+G+B dots)
Pixel pitch 0.204(H)
0.204 (V) mm
Pixel configuration R, G, B vertical stripe
Display mode Normally white
Unit outline dimensions (typ.)*1 275.82 (H)×178 (V)×5.2 (T) Max mm
Mass 260 max. g
Surface treatment Anti Glare + Hard Coating 3H
[Note] : excluding backlight cables. Outline dimensions are shown in this specification.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
QD12TL0203 Page 4/26
4. Input Connectors
4-1 Signal Interface Connector
CN1 (1 channel, LVDS signals – NSC/Ti standard and +3.3V DC power supply)
Using connector: DF19L-20P-1H by Hirose or equivalent
Interface Cable Pin Assignments
PIN NO SYMBOL FUNCTION
1 VSS Ground
2 VDD Power Supply, 3.3 V (typical)
3 VDD Power Supply, 3.3 V (typical)
4 V EEDID DDC 3.3V power
5 NC Reserved for supplier test point
6 Clk EEDID DDC Clock
www.panelook.com
7 DATA EEDID DDC Data
8 Rin0- - LVDS differential data input (R0-R5, G0) (odd pixels)
9 Rin0+ + LVDS differential data input (R0-R5, G0) (odd pixels)
10 VSS Ground
11 Rin1- - LVDS differential data input (G1-G5, B0-B1) (odd pixels)
12 Rin1+ + LVDS differential data input (G1-G5, B0-B1) (odd pixels)
13 VSS Ground
14 Rin2- - LVDS differential data input (B2-B5, HS, VS, DE) (odd pixels)
15 Rin2+ + LVDS differential data input (B2-B5, HS, VS, DE) (odd pixels)
16 VSS Ground
17 ClkIN- - LVDS differential clock input (odd pixels)
18 ClkIN+ + LVDS differential clock input (odd pixels)
19 VSS Ground
20 NC No connect
[Note 1] Relation between LVDS signals and actual data shows below section (4-2).
[Note 2] The shielding case is connected with signal GND.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
www.panelook.com
V
Generator
DC
Timing
(SiI223A)
Driver
S1
G1
Source
S1280
LCD Panel
-
TFT
www.panelook.com
Gate Driver
Global LCD Panel Exchange Center
QD12TL0203 Page 5/26
4-2 Interface Block diagram
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
DC
COM
-
Gamma
LVDS &
Controller
Control & Source
GVDD/GVEE
AVDD
DVDD
Gamma
User
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
QD12TL0203 Page 7/26
4-3. Backlight driving
CN2: BHSR-02VS-1 /JST, BHSR-02VS
Mating connector: SM02B-BHSS-1-TB (JST) or 87210-0200
Pin No. Symbol Function
1
2
HIGH
LOW
Power supply for lamp
(High voltage side)
Power supply for lamp
(Low voltage side)
[Note]VBLH and VBLC must be connected correctly. If user connects wrongly, the user
will be hurt and module will be broken.
5. Absolute Maximum Ratings
5-1 LCD module
Parameter Symbol Condition Ratings Unit Remark
Input voltage
www.panelook.com
V
I Ta=25
0.3
VDD+0.3
[Note1]
+3.3V supply voltage VDD Ta=25
Storage temperature Tstg
Operating temperature
Topa
0
0
-25+60
+50
4
[Note2]
[Note3]
(Ambient)
[Note1] LVDS signals
[Note2] Humidity
[Note3] When you apply the LCD module for OA system. Please make sure to keep the
temperature of LCD module is less than 60
95%RH Max. at Ta40.
Maximum wet-bulb temperature at 39
No condensation.
or less at Ta>40.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
25
t1
t2
t3
QD12TL0203 Page 8/26
6. Electrical Characteristics
www.panelook.com
6-1.TFT-LCD panel driving Ta
Parameter Symbol Min. Typ. Max. Unit Remark
VDD Supply voltage VDD +3.0 +3.3 +3.6
Current
dissipation
@ Full white pattern
@ Full back pattern
@ 1-line on/off pattern
@ 1-dot on/off pattern
@ Mosaic pattern
Permissive input ripple voltage
Differential input High
Threshold voltage Low
Terminal resistor
Rush current I
IDD
V
RP
V
TH
V
TL
R
T
RUSH
-100
1.5 A
185
240
240
265
220 370
100
100 mV p-p Vcc=+3.3V
100 mV VCM=+1.2V
mV
[Note 1] VCM: Common mode voltage of LVDS driver.
[Note 2] On-off conditions for supply voltage
[Note2]
[Note3]
Note1
Differential
input
Rise time
470uS
0.5
0
0
400 ms
200 ms
200 ms
10 ms
50 ms
50 ms
t4
t5
t6
Vcc-dip conditions
1) 2.5 V
td
2) Vcc
10 ms
2.5 V
Vcc3.0 V
Vcc-dip conditions should also follow the On-off conditions for supply voltage
VDD
DATA
CCFL
10%
t1
90%
t2
t5
10%
90%
t3
t6
2.5V
t
d
t4
v
3.0V
10%
cc
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
QD12TL0203 Page 9/26
Note3Test pattern of current dissipation
[Full white pattern] VDD=+3.3V [Full black pattern] VDD=+3.3V
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
[1 line on/off pattern] VDD=+3.3V [1 dot on/off pattern] VDD=+3.3V
www.panelook.com
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B
[32x32 Mosaic pattern] VDD=+3.3V
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
QD12TL0203 Page 10/26
6-2. Backlight driving
The backlight system is an edge-lighting type with single CCFT (Cold Cathode
Fluorescent Tube).
The characteristics of the lamp are shown in the following table.
Parameter Symbol Min. Typ. Max. Unit Remark
Lamp current range I
Lamp voltage V
Lamp power consumption P
Lamp frequency F
Kick-off voltage Vs
Lamp life time L
[Note1Lamp current is measured with current meter for high frequency as shown below.
www.panelook.com
L
L
L
L
L
3.0 6.0 6.5 mArms [Note1]
522 580 638 Vrms
40
15000
3.48
60 kHz [Note3]
1110 Vrms Ta=25
1330 Vrms Ta=0 [Note4]
hour [Note5]
I
6.0mA [Note2]
L=
1
Module
2
Inverter
A
[Note2]Calculated Value for reference ( I
[Note3]Lamp frequency may produce interference with horizontal synchronous frequency,
and this may cause beat on the display. Therefore lamp frequency shall be detached
as much as possible from the horizontal synchronous frequency and from the
harmonics of horizontal synchronous to avoid interference.
[Note4] The voltage above this value should be applied to the lamp for more than 1 second to
start-up. Otherwise the lamp may not be turned on.
[Note5] Lamp life time is defined as the time when either
operation under the condition of Ta = 25
Brightness becomes 50 % of the original value under standard condition.
Kick-off voltage at Ta = 0exceeds maximum value.
V L)
L
or
and IL=6.0mArms.
occurs in the continuous
[Note] The performance of the backlight, for example life time or brightness, is much
influenced by the characteristics of the DC-AC inverter for the lamp. When you design or
order the inverter, please make sure that a poor lighting caused by the mismatch of the
backlight and the inverter (miss-lighting, flicker, etc.) never occur. When you confirm it, the
module should be operated in the same condition as it is installed in your instrument.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
QD12TL0203 Page 11/26
7. Timing characteristics of LCD module input signals
7-1. Timing characteristics
(This is specified at digital outputs of LVDS driver.)
Data
ENAB
Sync
www.panelook.com
Vertical
Sync pulse width (TVC) 2 4 20 line
Itemsymbol
Vsync cycle (TVA) 16.667 ms Negative
Blanking period(TVB) 8 16 100 line
Back porch (TVD) 2 8 80 line
Sync pulse width + Back
porch
Activedisplayarea(TVE) 800 800 800 line
Front porch (TVF) 2 4 80 line
( Horizontal )
Item
Hsync cycle (THA) 20.44
Blanking period (THB) 60 128 320 clock
Sync pulse width (THC) 16 32 48 clock
Back porch (THD) 20 75 180 clock
Sync pulse width + Back
porch (T
Activedisplayarea(THE) 1280 1280 1280 clock
Front porch (THF) 8 21 180 clock
(TVC+TVD)
symbol
HC+THD
)
Min. Typ. Max. Unit Remark
808 816 900 line
4 12 100 line
Min. Typ. Max. Unit Remark
s
1340 1408 1600 clock
36 107 228 clock
Negative
Clock
[Note] In case of lower frequency, the deterioration of display quality, flicker etc., may be
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Item Min. Typ. Max. Unit Remark
Frequency 60 68.9 80 MHz [Note1]
occurred.
www.panelook.com
Page 13
Global LCD Panel Exchange Center
QD12TL0203 Page 12/26
7-2. Input Data Signals and Display Position on the screen
www.panelook.com
D1, DH1
D1, DH2 D2, DH2
D1, DH3
D1, DH800
D2, DH1
D3, DH1
R
D1280, DH1
G B
D1280, DH800
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
QD12TL0203 Page 13/26
8. Input Signals, Basic Display Colors and Gray Scale of Each Color
www.panelook.com
Colors &
Gray scale Gray
Black 000000000000 0000 0 0
Blue
Basic Color Gray Scale of Red Gray Scale of Green Gray Scale of Blue
Green
Cyan
Red
Magenta
Yellow
White
Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Darker GS2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Data signal
R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5
Scale
000000000000 1111 1 1
000000111111 0000 0 0
000000111111 1111 1 1
111111000000 0000 0 0
111111000000 1111 1 1
111111111111 0000 0 0
111111111111 1111 1 1
GS1 100000000000 0000 0 0
BrighterGS6110111100000 0 0000 0 0
GS62011111000000 0000 0 0
Red GS6311111100000 0 0000 0 0
Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GS1 000000100000 0000 0 0
Darker GS2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
BrighterGS6100000010111 1 0000 0 0
GS62000000011111 0000 0 0
GreenGS6300000011111 1 0000 0 0
Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GS1 000000000000 1000 0 0
Darker GS2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0
BrighterGS6100000000000 0 101 1 1 1
GS62000000000000 011 1 1 1
Blue GS63000000000000 1111 11
0 : Low level voltage, 1 : High level voltage
Each basic color can be displayed in 64 gray scales from 6 bit data signals. According to the
combination of total 18 bit data signals, the 262,144-color display can be achieved on the screen.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
e
www.panelook.com
QD12TL0203 Page 14/26
9. EDID data structure
This is the EDID (Extended Display Identification Data) data format to support displays as defined in th
VESA Plug & Display.
Byte Byte Value Value
(decimal) (hex)
Header
0 0 Header 00 00000000
1 1 Header FF 11111111
2 2 Header FF 11111111
3 3 Header FF 11111111
4 4 Header FF 11111111
5 5 Header FF 11111111
6 6 Header FF 11111111
7 7 Header 00 00000000
Vender/Product ID / EDID Version
8 8 EISA manufacturer code=QDS 44 01000100
9 9 EISA manufacturer code(Compressed ASCII) 93 10010011
10 0A Product code (78) LSB 4E 01001110
11 0B Product code MSB 00 00000000
Field Name and Comments
(hex) (binary)
12 0C ID (32bit) Serial No (zero if not used) 00 00000000
13 0D ID (32bit) Serial No (zero if not used) 00 00000000
14 0E ID (32bit) Serial No (zero if not used) 00 00000000
15 0F ID (32bit) Serial No (zero if not used) 00 00000000
16 10 Week of manufacture 00 00000000
17 11 Year of manufacture – 1990 (ex. 2005-1990=15) 0F 00001111
18 12 EDID structure version # = 1 01 00000001
19 13 EDID revision # = 3 03 00000011
Display Parameter
20 14 Video I/P definition = Digital I/P 80 10000000
21 15 Max H image size (cm) =26cm 1A 00011010
22 16 Max V image size (cm) =16cm 10 00010000
23 17 Display gamma ( 2.2× 100 ) –100 78 01111000
24 18 Features (no DPMS,Active off,RGB,timing BLK1) 0A 00001010
Panel Color Coordinates
25 19 Red/Green Low bits (RxRy/GxGy) 3B 00111011
26 1A Blue/White Low bits (BxBy/WxWy) 90 10010000
27 1B Red X Rx=0.59 97 10010111
28 1C Red Y Ry=0.343 57 01010111
29 1D Green X Gx=0.295 4B 01001011
30 1E Green Y Gy=0.558 8E 10001110
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
QD12TL0203 Page 15/26
31 1F Blue X Bx=0.163 29 00101001
32 20 Blue Y By=0.15 26 00100110
33 21 White X Wx=0.313 50 01010000
34 22 White Y Wy=0.329 54 01010100
Established Timings
35 23 Established timings 1 (00h if not used) 00 00000000
36 24 Established timings 2 (00h if not used) 00 00000000
Standard Timing ID
37 25 Manufacturer’s timings( 00h if not used) 00 00000000
38 26 Standard timing ID1 (01h if not used) 01 00000001
39 27 Standard timing ID1 (01h if not used) 01 00000001
40 28 Standard timing ID2 (01h if not used) 01 00000001
41 29 Standard timing ID2 (01h if not used) 01 00000001
42 2A Standard timing ID3 (01h if not used) 01 00000001
43 2B Standard timing ID3 (01h if not used) 01 00000001
44 2C Standard timing ID4 (01h if not used) 01 00000001
45 2D Standard timing ID4 (01h if not used) 01 00000001
46 2E Standard timing ID5 (01h if not used) 01 00000001
47 2F Standard timing ID5 (01h if not used) 01 00000001
48 30 Standard timing ID6 (01h if not used) 01 00000001
49 31 Standard timing ID6 (01h if not used) 01 00000001
50 32 Standard timing ID7 (01h if not used) 01 00000001
51 33 Standard timing ID7 (01h if not used) 01 00000001
52 34 Standard timing ID8 (01h if not used) 01 00000001
53 35 Standard timing ID8 (01h if not used) 01 00000001
Timing Descriptor #1
54 36 Pixel Clock(68.9M)/10,000 (LSB) EA 11101010
55 37 Pixel Clock(68.9M)/10,000 (MSB) 1A 00011010
56 38 Horizontal Active=1280 pixels (lower 8 bits) 00 00000000
57 39 Horizontal Blanking=128 pixels (lower 8bits) 80 10000000
58 3A Horizontal Active: Horizontal Blanking (upper 4:4 bits) 50 01010000
59 3B Vertical Active =800 lines (lower 8bits) 20 00100000
60 3C Vertical Blanking=16 lines (lower 8bits) 10 00010000
61 3D Vertical Active : Vertical Banking (upper 4:4 bits) 30 00110000
62 3E Horizontal Sync.Offset =21 pixels (lower 8bits) 15 00010101
63 3F Horizontal Sync.Width=32 pixels (lower 8bits) 20 00100000
64 40 Vertical Sync. Offset: lines Sync. Width (lower 4bits) 44 01000100
65 41 Horizontal/Vertical Sync Offset/Width (upper 2 bits) 00 00000000
66 42 Horizontal Image Size=261.12mm (lower 8 bits) 05 00000101
67 43 Vertical Image Size=163.2mm (lower 8 bits) A3 10100011
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
www.panelook.com
QD12TL0203 Page 16/26
68 44 Horizontal : Vertical Image Size (upper 4:4 bits) 10 00010000
69 45 Horizontal Border (zero for internal LCD) 00 00000000
70 46 Vertical Border (zero for internal LCD) 00 00000000
71 47 Non-interlaced,Normal,no stereo,Separate sync,H/V pol negatives 18 00011000
Timing Descriptor #2 MANUFACTURER SPECIFIED RANGE TIMING Descriptor
72 48 Flag 00 00000000
73 49 Flag 00 00000000
74 4A Flag 00 00000000
75 4B Data Type Tag : Descriptor Defined by Manufacturer 0F 00001111
76 4C Flag 00 00000000
77 4D Value=HSPW min/2 (pixel clks) 08 00001000
78 4E Value=HSPW max/2 (pixel clks) 18 00011000
79 4F Value=Thbp min/2 (pixel clks) 12 00010010
80 50 Value=Thbp max/2 (pixel clks) 72 01110010
81 51 Value=VSPW min/2 (line pulses) 01 00000001
82 52 Value=VSPW max/2 (line pulses) 0A 00001010
83 53 Value=Tvbp min/2 (line pulses) 02 00000010
84 54 Value=Tvbp max/2 (line pulses) 32 00110010
85 55 Thp min=value*2+HA pixel clks (pixel clks) 1E 00011110
86 56 Thp max=value*2+HA pixel clks (pixel clks) A0 10100000
87 57 Tvp min=value*2+VA lines 04 00000100
88 58 Tvp max=value*2+VA lines 32 00110010
89 59 Module revision 01 00000001
Timing Descriptor #3 : ASCII String : Supplier Name
90 5A Flag 00 00000000
91 5B Flag 00 00000000
92 5C Flag 00 00000000
93 5D Data Type Tag : Module serial number FE 11111110
94 5E Flag 00 00000000
95 5F ASCII (Q) 51 01010001
96 60 ASCII (U) 55 01010101
97 61 ASCII (A) 41 01000001
98 62 ASCII (N) 4E 01001110
99 63 ASCII (T) 54 01010100
100 64 ASCII (A) 41 01000001
101 65 ASCII (D) 44 01000100
102 66 ASCII (I) 49 01001001
103 67 ASCII (S) 53 01010011
104 68 ASCII (P) 50 01010000
105 69 ASCII (L) 4C 01001100
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
www.panelook.com
QD12TL0203 Page 17/26
106 6A ASCII (A) 41 01000001
107 6B ASCII (Y) 59 01011001
Timing Descriptor #4 ASCII String : Supplier P/N
108 6C Flag 00 00000000
109 6D Flag 00 00000000
110 6E Flag 00 00000000
111 6F Data Type Tag : Module Name FE 11111110
112 70 Flag 00 00000000
113 71 Q 51 01010001
114 72 D 44 01000100
115 73 1 31 00110001
116 74 2 32 00110010
117 75 T 54 01010100
118 76 L 4C 01001100
119 77 0 30 00110000
120 78 2 32 00110010
121 79 Product revision (ex :3) 33 00110011
122 7A Terminate with ASCII code 0Ah 0A 00001010
123 7B Pad field with ASCII code 20h 20 00100000
124 7C Pad field with ASCII code 20h 20 00100000
125 7D Pad field with ASCII code 20h 20 00100000
126 7E Extension flag 00 00000000
127 7F Checksum 36 00110110
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
=0
=0
QD12TL0203 Page 18/26
10.Optical Characteristics
Parameter Symbol Condition Min. Typ. Max. Unit Remark
Viewing Horizontal R, L CR>10 40 45
Angle Vertical Up 10 15 Deg.
Range Dn 30 35 Deg.
Contrast ratio
www.panelook.com
Ta=25, Vcc=+3.3V
n
300 400 [Note2,4]
Deg. [Note1,4]
Response Rise Tr
Time Decay Td
Chromaticity of Wx
White Wy
Chromaticity of Rx
Red Ry
Chromaticity of Gx
Green Gy
Chromaticity of Bx
Blue By
Luminance of white
[Note5
White Uniformity
5 points
Center
1
5 Points
2
13 points
10 15 ms [Note3,4]
0.283 0.313 0.343
0.299 0.329 0.359
0.560
0.313
0.265
0.528
0.133
0.120
165 185
15 20 ms
0.590
0.343
0.295
0.558
0.163
0.150
0.620
0.373
0.325
0.588
0.193
0.180
200
1.3 [Note5]
1.53
[Note4]
[Note4]
[Note4]
[Note4]
2
Cd/m
IL = 6.0 mArms
F
=55kHz
L
The optical characteristics shall be measured in a dark room or equivalent state with the
method shown in Fig.3.
Photodetector (BM-5A: TOPCON)
TFT-LCD module
Field=2
Fig 3. Optical characteristics measurement method
o
400 mm
LCD Panel
Center of the screen
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
p
A
QD12TL0203 Page 19/26
[Note1] Definitions of viewing angle range:
6 o’clock direction
[Note2] Definition of contrast ratio:
The contrast ratio is defined as the following.
www.panelook.com
Normal Direction
L
R
Dn
U
Luminance (brightness) with all pixels white
Contrast Ratio (CR) =
Luminance (brightness) with all pixels black
[Note3] Definition of response time:
The response time is defined as the following figure and shall be measured by
switching the input signal for "black" and "white" .
White
100%
90%
10%
(Relative Value)
0%
Photodetector Output
WhiteBlack
r
d
Time
[Note4] This shall be measured at center of the screen.
[Note5] Definition of white uniformity:
Maximun Luminance of 5/13 points
320
F
640
G
960
δw=
Minimum Luminance of 5/13 points
I C
*1) 5 Points are A~E
*1) 13 Points are A~M
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
B E
K
L
H
D
J
M
200
400
www.panelook.com
600
Page 21
Global LCD Panel Exchange Center
QD12TL0203 Page 20/26
11. Display Quality
The display quality of the color TFT-LCD module shall be in compliance with the Incoming
Inspection Standard.
12. Handling Precautions
a) Be sure to turn off the power supply when inserting or disconnecting the cable.
b) Be sure to design the cabinet so that the module can be installed without any extra
stress such as warp or twist.
c) Since the front polarizer is easily damaged, pay attention not to scratch it.
d) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
e) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
f) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface. Handle with care.
www.panelook.com
g) Since CMOS LSI is used in this module, take care of static electricity and injure the
human earth when handling.
h) Observe all other precautionary requirements in handling components.
i) This module has its circuitry PCBs on the rear side and should be handled carefully
in order not to be stressed.
j) Laminated film is attached to the module surface to prevent it from being scratched.
Peel the film off slowly just before the use with strict attention to electrostatic
charges. Ionized air shall be blown over during the action. Blow off the 'dust' on the
polarizer by using an ionized nitrogen gun, etc..
k) Cold cathode fluorescent lamp in LCD panel contains a small amount of mercurcy,
please follow local ordinance or regulation for disposal.
l) Mounting screw hole can stand torque 1.3~1.5 Kgf-cm.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
QD12TL0203 Page 21/26
13. Reliability test items
No. Test item Conditions
1 High temperature storage test Ta = 60 240h
www.panelook.com
2 Low temperature storage test Ta = -25
3 High temperature
& High humidity operation test
Ta = 40 ; 90%RH 240h, (As remark #3)
(No condensation)
4 High temperature operation test Ta = 50
(The panel temp. must be less than 60
5 Low temperature operation test Ta = 0
6 Vibration test
(non - operating)
7 Shock test
(Non- operating)
Frequency : 10
Test period: 3hrs (1Hr for each of X, Y, Z)
Max. Gravity: 220G
Pulse width: 2 ms, Half sine wave
240h
240h
240h
500 Hz, 1.5Grms
)
Direction: X,Y,Z;Once for each direction.
8 Altitude test (Operating) 0-10000 feet (3048m) / -20/ +60 / 24hr
9 Altitude test (Storage) 0-40000 feet (12192m) / 0 / +55 / 24hr
Remark:
(1) A failure is defined as the appearance of pixel failured on any color layer or the
appearance of horizontal or vertical lines, bars etc.
(2) Low temperature storage “ Panel must return to operating temperature range prior to
activation.”
(3) Hi temperature / Humidity test
o
Max. wet-bulb temperature is less than 39
C ; At glass temperature high than 40 oC.
Temperature and relative humidity range is shown in the figure below.
-60
Relative Humidity(%
100
80
60
40
20
-40 -20
Temperature (oC)
Operating Range
Storage Range
0
20
40 60
80
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
QD12TL0203 Page 22/26
14. Others
1) Lot No. Label:
Serial number Product Name
JFC1171000001 QD12TL02 Rev.03
01
2) Adjusting volume has been set optimally before shipment, so do not change any
adjusted value. If adjusted value is changed, the specification may not be satisfied.
3) Disassembling the module can cause permanent damage and should be strictly
avoided.
www.panelook.com
Serial Number Bar Code
4) Please be careful since image retention may occur when a fixed pattern is displayed
for a long time.
5) If any problem occurs in relation to the description of this specification, it shall be
resolved through discussion with spirit of cooperation.
PDF created with pdfFactory Pro trial version www.pdffactory.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
www.panelook.com
20100
CARTON
TAPE
20100
www.panelook.com
Global LCD Panel Exchange Center
QD12TL0203 Page 23/26
15. Packing form
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 25
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
QD12TL0203 Page 24/26
16. Mechanical Outline Dimension
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
PDF created with pdfFactory Pro trial version www.pdffactory.com
Page 26
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
QD12TL0203 Page 25/26
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
PDF created with pdfFactory Pro trial version www.pdffactory.com
Loading...