Item Checklist
This item checklist is only available for retail market.
Completely check your package,If you discover dam-
aged or missing items, contact your retailer.
P4I848P series mainboard
QDI Utility CD
1HD ribbon cable
1 FDD cable
User’s manual
I/O shield
1 10-pin ribbom cable with bracket for USB(option)
Cable with bracket for 6CH_BRACKET(option)
Signal cables for Serial ATA(option)
Power cables for Serial ATA(option)
Notice
The information in this document is subject to
change in order to improve reliability, design, or func-
tion without prior notice and does not represent a
commitment on the part of this company. In no event
will we be liable for direct, indirect, special, inciden-
tal, or consequential damages arising out of the use
or the possibility of such damages.
All trademarks are the property of their respective
owners.
If you need any further information, please visit our
web-site: “www.qdigrp.com”.
Declaration of conformity
QUANTUM DESIGNS(HK) LTD.
20th Floor, Devon House, Taikoo Place, 979 King’s Road,
Quarry Bay, Hong Kong
declares that the product
Mainboard
P4I848P
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
EN 55022 Limits and methods of measurements of radio disturbance
characteristics of information technology equipment
EN 50081-1 Generic emission standard Part 1:
Residential, commercial and light industry
EN 50082-1 Generic immunity standard Part 1:
Residential, commercial and light industry
European Representative:
QDI COMPUTER ( UK ) LTD QDI COMPUTER ( SCANDINAVIA ) A/S
QDI SYSTEM HANDEL GMBH QDI EUROPE B. V.
QDI COMPUTER (FRANCE) SARL QDI COMPUTER HANDELS GMBH
LEGEND QDI SPAIN S.L . QDI COMPUTER (SWEDEN) AB
Signature : Place / Date : HONG KONG/2003
Printed Name : Xu Wenge Position/ Title : Assistant President
Declaration of conformity
Trade Name: QDI Computer ( U. S . A. ) Inc.
Model Name: P4I848P
Responsible Party: QDI Computer ( U. S. A.) Inc.
Address: 41456 Christy Street
Fremont, CA 94538
Telephone: (510) 668-4933
Facsimile: (510) 668-4966
Equipment Classification: FCC Class B Subassembly
Type of Product: Mainboard
Manufacturer: Quantum Designs (HK) Inc.
Address: 20th Floor, Devon House, Taikoo Place
979 King’s Road, Quarry Bay, HONG
KONG
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions : (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Tested to comply with FCC standards.
Signature : Date : 2003
Chapter 1
Introduction .................................................................... 1
Key Features ................................................................. 2
Chapter 2
Installation Instructions.........................................................5
External Connectors ............................................................6
PS/2 Keyboard /Mouse Connector ................................... 6
USB1, USB2,USB3,USB4 and LAN Connectors ................ 6
Parallel Port, Serial Port and SPDIF Connectors ............... 6
1394 Port..............................................................................7
Line-in jack, Mic-in jack and Speaker-out jack ................. 7
6-Channel Audio .............................................................. 7
ATX 12V Power Supply Connectors & Power Switch ..... 8
Hard Disk LED Connector ( HD_LED ) .......................... 8
Reset Switch ( RESET ) ................................................. 8
Speaker Connector ( SPEAKER ) .................................. 9
Power LED Connector( PWR_LED ) ................................. 9
ACPI LED Connector( ACPI_LED ) .................................... 9
USB35,6; USB7,8 Connector ........................................... 10
Infrared Header ( IrDA ) ................................................. 10
Fan Connectors( CPU_FAN , PWR_FAN ) ......................... 11
Wake-Up On Internal Modem ( WOM ) ............................. 11
Audio Connectors (CD_IN, AUX_IN, MODEM ) .................. 12
4-pin SMBus Connector( SMBUS ) ................................... 12
Diagnosis LED ................................................................. 13
Front Audio Interface(F_Audio) ....................................... 14
Onboard SATA ................................................................ 14
6CH-BRACKET Connector .................................................. 15
Chassis Security Switch(CHSSEC) ................................. 15
Front IEEE 1394 port(F_1394)..............................................16
Jumper Settings .................................................. .............. 17
Wake-up function(JUSB, JFUSB)(optional) .17
(optional)
Onboard LAN(LAN_EN)................................................................21
Caution
Be sure to unplug the AC power supply before adding or re-
moving expansion cards, RAM or other system peripherals, other-
wise your mainboard and RAM might be seriously damaged.
Caution
Be sure to add some Silicone Grease between the CPU and the
heatsink to keep them fully contacted to meet the heat sink require-
ment.
T-- This page is intentionally left blank --his
Chapter 1Chapter 1
Chapter 1
Chapter 1Chapter 1
Chapter 1
Introduction
P4I848P series of mainboards utilize Intel® 848P + ICH5
(ICH5R) chipset, providing a fully compatible, high performance and cost-effective ATX platform. The new integrated
technologies, together with AC’97 audio(2/6-channel), 8
USB, 2 SATA, and ATA100/66/33, give customers an
advanced, multimedia solution at reasonable price. It provides 400/533/800MHz host bus speed to support Intel
Pentium 4 socket 478 processors and the DDR266/333/
400 memory. It also provides advanced features such as
Wake up by USB devices, Wake-on-Modem, ACPI and Keyboard Password Power-on functions. Suspending to RAM,
the optimal implementation of the Advanced Configuration
and Power Interface (ACPI) specification, makes the PC’s
power consumption drop to the lowest possible level and
enable quick wakeup.
1
®
P4I848PP4I848P
P4I848P
P4I848PP4I848P
2
IntroductionIntroduction
Introduction
IntroductionIntroduction
Key Features
Form factor
ATX form factor of 305mm x 210mm
Microprocessor
Supports Intel
Supports Intel
800 MHz FSB
Supports Intel
/2.8/3.06GHz and above
Supports 400/533/800MHz host bus speed
®
Pentium 4 (Hyper-Threading) socket 478 processors
®
Pentium 4 (Northwood) socket 478 processors at 2.4/2.6/2.8/3.06/3.2GHz with
®
Pentium 4 (Northwood) socket 478 processors at 1.8/2.0/2.2/2.26/2.4/2.53/2.66
System memory
Provides two 184-pin DDR SDRAM interfaces
Supports DDR266/333/400 SDRAM
Supports 64/128/256/512Mb technology up to 2GB
Onboard IDE
Supports Independent timing of up to 4 drives
Supports Ultra ATA 33/66/100, PIO mode
Two fast IDE interfaces supporting four IDE devices including IDE hard disks and CD ROM
drives
Onboard LAN(Available on -L, -K)(optional)
10/100/1000(available on -Kmainboard) Mbit/sec Ethernet support
10/100/1000M(available on -K mainboard) LAN interface built-in on board
Note: If the mainboard has onboard LAN, PCI1 slot only can connect to slave device.
USB 2.0
USB 2.0 compliant, operates at 480Mbps, about 40X times faster than USB 1.1 which cur-
rently works at a snails pace of just 12Mbps
Provides 8 USB 2.0 ports
Onboard I/O
One floppy port supporting up to two 3.5
/2.88M format
One high speed 16550 compatible COM with 16 byte send/receive FIFO
One parallel port supports SPP/EPP/ECP mode
Supports PS/2 mouse and PS/2 keyboard
Provides one IrDA connector
All I/O ports can be enabled/disabled in the BIOS setup
″
or 5.25″ floppy drives with 360K/720K/1.2M/1.44M
QDIQDI
QDI
QDIQDI
Chapter 1Chapter 1
Chapter 1
Chapter 1Chapter 1
Onboard Audio
AC’97 2.2 Specification Compliant
Provides onboard Line-in Jack, Microphone-in Jack and Speaker-out Jack
6-channel Onboard Audio(available on -6A mainboard)
AC’97 2.2 Specification Compliant
Provides Front left&right, Rear left&right/Line-in Jack and Center&Woofer/Microphone-in
Jack,which can be specified by software
Graphics Interface
The AGP interface Supports 0.8V/1.5V signaling wih 8X/4X data transfer and 8X/4X AGP Fast
Writes
Advanced features
PCI 2.2 Specification Compliant
Provides Trend ChipAwayVirus On Guard
Supports Windows 98/2000/ME/XP soft-off
Supports Wake-on-Modem
Supports Keyboard Password Power-on function
Supports system monitoring(monitors CPU and system temperatures, system voltages, fan speed)
Supports CPU triple overheat protection
1. If the temperature of the CPU reachs the CPU Warning Temperature set in BIOS, the buzzer
will warn.
2. At the same time, the CPU THER-Throttling will be slowed down to the setpoint in BIOS.
3. If the temperature of the CPU reach the CPU Shutdown Temperature, the system will be
shutdown automatically under the ACPI OS and the data will be saved before.
(Reference to “PC Health Status” in BIOS)
3
Supports hot-plug
Two SATA devices including SATA HDD and CDROM/DVD ROM devices
Supports 150Mbps transfer rate.
BIOS
Licensed advanced AWARD(Phoenix) BIOS, supports flash ROM, plug and play ready
Supports IDE CDROM/SCSI/USB boot up.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
4
IntroductionIntroduction
Introduction
IntroductionIntroduction
Green function
Supports ACPI (Advanced Configuration and Power Interface) and ODPM (OS Directed
Power Management)
Supports ACPI power status: S0 (full-on), S1 (power on suspend), S3 (suspend to RAM),
S4(suspend to Disk, depends on OS) and S5 (soft-off)
Main Expansion Slots and Connectors
Slot/Port (Quantity) Description
PCI(5) PCI slots
IDE(2 ) IDE ports
FLOPPY(1) Floppy Drive port
DDR(2) DIMM socket
USB(8) USB connectors
AGP(1) AGP slot
LAN(1) (optional) LAN connector
COM(1) COM connectors
PARALLEL(1) Parallel connector
IrDA(1) IrDA connector
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
Chapter 2
Installation Instructions
This section covers External Connectors and Jumper
Settings. Refer to the mainboard layout chart for locations
of all jumpers, external connectors, slots and I/O ports. Furthermore, this section lists all necessary connector pin assignments for your reference. The particular state of the
jumpers, connectors and ports are illustrated in the following figures. Before setting the jumpers or inserting these
connectors, please pay attention to the direction.
5
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
uctionuction
uction
uctionuction
External Connectors
PS/2 Keyboard/Mouse Connector
PS/2 keyboard connector is for the usage of PS/2 keyboard. If using a standard AT size
keyboard, an adapter should be used to fit this connector. PS/2 mouse connector is for the
usage of PS/2 mouse.
PS/2 Mouse connector
PS/2 Keyboard connector
USB1, USB2,USB3,USB4 and LAN Connectors(optional)
(LAN connector is only available on -L/-K mainboard)
Four USB ports are for connecting USB devices. The RJ-45 connector is for onboard LAN.
ACTIVE
LINK
LAN (optional)
USB1
USB2
USB4
USB3
6
Parallel Port, Serial Port Connectors ( COM1 ) and SPDIF OUT Connector
The parallel port connector can be connected to a parallel device such as a printer. The serial
port COM1 connector can be connected to a serial port device such as a serial port mouse. You
can enable/disable them and choose the IRQ or I/O address in “Integrated Peripherals” from
AWARD BIOS SETUP.
Parallel Port
COM1
SPDIF
00
0
00
Warning:
Be sure to unplug the AC power supply before adding or removing expansion cards or other system peripherals, otherwise your
mainboard and expansion cards might be seriously damaged.
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
1394 port(optional)
IEEE 1394 Port(optional)
Line-in jack, Microphone-in jack and Speaker-out jack
The Line-in jack can be connected to devices such as a cassette or minidisc player to playback or
record.
The Microphone-in jack can be connected to a microphone for voice input.
The Speaker-out jack allows you to connect speakers or headphones for audio output from the
internal amplifier.
Line In
Speaker Out
Microphone In
7
6-Channel Audio
(Available on -6A mainboard)
This mainboard utilizes ALC655 chip providing 6-channel Audio, which consists of Front Left, Front
Right, Rear Left, Rear Right, Center and Woofer for a complete surround sound effect. When 6Channel audio is available, the front Left&Right jack can be connected to the Front speskers, the
Back Left&Right jack can be connected to the rear speakers and the Center&Woofer jack can be
connected to the center speaker and woofer.
Microphone function is offered by F_AUDIO Connector on the mainboard now.
If set 2-Channel Audio mode on -6A mainboard, you can connect two speakers to the Front Left&Right
jack, at the same time use the Rear Left&Right jack as Line in jack, and use the Center&Woofer jack
as Microphone in jack.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
8
uctionuction
uction
uctionuction
ATX 12V Power Supply Connector & Power Switch (POWER SW)
The power switch (POWER SW) should be connected to a momentary switch. When powering
up your system, first turn on the mechanical switch of the power supply (if one is provided),
then push once the power switch. When powering off the system, you needn’t turn off the
mechanical switch, just push once the power switch.
+12V Power Supply Connector
1
12V
12V
ATX Power Supply Connector
5V
GND 3.3V GND 5V GND PS-OK 3.3V
5VSB
-5V GND PS-ON -12V 3.3V GND GND GND
12V
20
5V5V
1
GND
GND
1
POWER SW
Note:
If you change “Soft-off by PWR-BTTN” from default “Instant-off”
to “Delay 4 Sec” in the “POWER MANAGEMENT SETUP” section of the BIOS, the power switch should be pressed for morethan
4 seconds before the system powers down.
Hard Disk LED Connector (HD_LED)
The connector connects to the case’s IDE indicator LED indicating the activity status of IDE
hard disk. The connector has an orientation. If one way doesn’t work, try the other way.
Reset Switch (RESET)
The connector connects to the case’s reset switch. Press the switch once, the system
resets.
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
Speaker Connector (SPEAKER)
The connector can be connected to the speaker on the case.
Power LED Connector (PWR_LED)
When the system is in S0 status, the LED is on. When the system is in S1 status, the LED
is blink; When the system is in S3,S4, S5 status, the LED is off. The connector has an
orientation.
ACPI LED Connector (ACPI_LED)
The ACPI LED is a dual-color light with three pins. Pin1and Pin2 drive different color lights.
If Pin1 drives the orange light , then, Pin2 drives the green light, the following status will
come out. When the system is in S0 status, the LED is green on. When the system is in S1
status, the LED is green blink. When the system is in S3 status, the LED is orange on.
When the system is in S4, S5 status, the LED is off.
POWER
SW
HDD_LED
ACPI_LED
ACPI_LED
SPEAKER
RESET
SW
PWR_LED
HDD LED
ORANGE(-)
GREEN(-)
LED+(VCC)
CUT
POWER
GND
POWER
HDD LED(-)
HDD LED(+)
VCC
GND
NC
SPKDATA
RESET
GND
LED-
LED+
P4I848PP4I848P
P4I848P
P4I848PP4I848P
SPEAKER
RESET
PWR_LED
9
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
uctionuction
uction
uctionuction
USB5,6; USB7,8
Besides USB1,2,3,4 on the back panel, P4I848P series of mainboards also have two 8-pin
headers on board which may connect to front panel USB cable( optional ) to provide additional
four USB ports.
10
USB7,8
USB5,6
+5V
D7-
D7+
GND GND
CUT
+5V
D5-
D5+
GND GND
CUT
+5V
D8-
D8+
N/A
+5V
D6-
D6+
N/A
Infrared Header (IrDA)
This connector supports wireless transmitting and receiving device. Before using this function, configure the settings for IR Address, IR Mode and IR IRQ from the “INTEGRATED
PERIPHERALS” section of the CMOS SETUP.
VCC
IRRX
IRTX
GND
NC
IrDA
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
Fan Connectors (PWR_FAN, CPU_FAN)
The fan speed of these three fans can be detected and viewed in “PC Health” section of the
CMOS SETUP.
CPU_FAN
SENSE
+12V
GND
+12V
SENSE
PWR_FAN
GND
Wake-Up On Internal Modem (WOM)
Through this function, the system which is in the suspend or soft-off status can be waked up
by a ring signal received from the internal modem. When this function is used, be sure an
internal modem card which supports this function is used. Then connect this header to the
relevant connector on the modem card, set “Power on by Ring/LAN” as Enabled in the
“Power Management Setup” section of the CMOS SETUP. Save and exit, then boot the
operating system once to make sure this function takes effect.
11
WOM
1
+5V standby
Signal for waking up(active low)
GND
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
uctionuction
uction
uctionuction
Audio Connectors (CD_IN, AUX_IN, MODEM)
(Available on -6A mainboard)
CD_IN
AUX_IN
MODEM
CD Left Channel
Right Audio Channel
GND
CD Right Channel
GND
Left Audio Channel
GND
12
Mono-Out (to Modem)
Phone-In (from Modem)
4-pin SMBus Connector(SMBUS)
This connector allows you to connect SMBus devices. SMBus devices communicate through
the SMBus with a SMBus host and/or other SMBus devices. The SMBus or System Management Bus is a specific implementation of I
multiple devices can be connected to the same bus and each one can act as a master by
initiating data transfer.
2
C bus, which is a multi-master bus, that is,
SMBUS
SMBCLD
SMBDATA
GND
5VSB
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
Diagnosis LED(Optional)
During the POST , the LED1~LED5 representing POST steps will light up in turn. During the
POST,If use the CPU of Hyper-Threading and Hyper-Threading is enable in the BIOS,the LEDs
will light up in turn, then blink together. please refer to the following table to learn the POST
status:
LED1 LED2 LED3 LED4 LED5 status
blink off off off off CPU damaged , BIOS chip absent or damaged
on off off off off system detect CPU and initialize chipset
off on off off off system detect memory
off off on off off system initialize PCI
off off off on off system initialize clockgen
off off off off on system detect Video and invoke Video BIOS
on on on on on Hyper-Threading OK
13
LED1
LED3
LED5
LED2
LED4
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
uctionuction
uction
uctionuction
Front Audio Interface(F_Audio)
The audio interface provides two kinds of audio output choices: the FrontAudio, the
RearAudio. Their priority level is as sequence. When the FrontAudio is available, the
RearAudio will be cut off. An onboard amplifier is provided for the earphone. When the
FrontAudio is absent, Pin9 and Pin10, Pin5 and Pin6 must be short connected.
F_AUDIO
Pin No. Symbol Pin No. Symbol
1 AUD_MIC 2 AUD_GND
3 AUD_MIC_BIAS 4 ADU_VCC
5 AUD_FPOUT_R 6 AUD_RET_R
7 NC 8 (Cut away)
9 AUD_FPOUT_L 10 AUD_RET_L
14
Onboard SATA
provides two Serial ATA connectors, SATA is a storage interface that is
compliant with SATA 1.0 Specification. With speed of up to 150Mbps. you can connect
Serial ATA cable to Serial ATA hard disk.
TX-
RX-
TX+
RX+
GND
GND
SATA1/SATA2
GND
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
6CH-BRACKET Connector(optional)
The SPDIF input allow your digital audio input from digital audio devices.(optional) The
6CH_BRACKET output is capable of providing digital audio data or compressed AC3 data to
an external Dolby digital decoder.
SURR_L
1
CENTER
SPDIF output
SPDIF Input
GND
SPDIF out
SPDIF in
SPDIF
SURR_R
BASS
CUTGND
VCC
GND
Chassis Security Switch (CHSSEC)
The connector connects to the chassis security switch on the case. The system can detect
the chassis intrusion through the status of this connector. If the connector has been closed
once, the system will record the status and indicate the chassis has been opened. You can
monitor or check this information from some software.
CHSSEC
Indicate signal
GND
15
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
uctionuction
uction
uctionuction
Front IEEE 1394 port(F_1394)
Besides one 1394 port on the back panel, the mainboard also have one 10-pin headers on
board to provide additional IEEE 1394 port.
16
F_1394
TPA+
Ground
TPB+
12V(FUSE)
TPA-
Ground
TPB-
12V(FUSE)
Ground
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
Jumper Settings
Jumpers are located on the mainboard, the clear CMOS jumper CLR_CMOS, enable keyboard password power-on function jumper JKB etc. Pin 1 for all jumpers are located on the
side with a thick white line (Pin1→
Jumpers with three pins will be shown as
and
to represent pin2 & pin3 (“2-3”) closed.
Jumper Symbol Description Represent
close set the pins closed
open set the pins opened
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
(optional)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving status including ACPI S3 by activating USB device. Before
using this function, set JFUSB/JUSB with pin1 & pin2 closed. Otherwise, set JFUSB/JUSB
with pin2 & pin3 closed for disabling. Furthermore, the item “Wake-Up From S3 by USB”in
Power Management Setup should also be set correspondingly to enable or disable this
function.
), referring to the mainboard’s silkscreen.
to represent pin1 & pin2 (“1-2”) closed
set pin1 and pin2 closed
set pin2 and pin3 closed
17
JUSB
JFUSB
1
123
Disable
1
2
3
Disable Enable
2
3
Enable
(default)
1
2
3
(default)
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
Overclocking Jumper Setting (J
Jumpers JFSB0 and JFSB1 provides users with CPU overclocking feature. The host bus
speed can be set as 100x4/133x4/166x4/200x4MHz or AUTO. If CPU FSB(front side bus) is
set as auto, the system detects the CPU FSB automatically. The table below is for your
reference.
uctionuction
uction
uctionuction
1
1
2
2
3
3
JFSB0 JFSB1
18
FSB AUTO 100MHz 133 MHz 166 MHz 200 MHz
JFSB0 1-2 2-3 OPEN OPEN 2-3
JFSB1 1-2 2-3 2-3 OPEN OPEN
“1-2”: pin1 & pin2 closed “2-3”: pin2 & pin3 closed OPEN: all pins opened
Whether or not your system can be overclocked depends on the capability of your processor
and memory. Whether the processor is bus ratio locked or unlocked should also be taken
into account. For bus ratio unlocked processor, this overclocking feature can be implemented
by setting FSB as 100x4/133x4/166x4/200x4MHz, meanwhile adjusting the bus ratio (multiplier) in “QDI Innovation features” in AWARD BIOS CMOS Setup and memorry.
Warning:
Be sure your selection is right. CPU over speeding is dangerous! We
will not be responsible for any damages caused.
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
BIOS-Protection Jumper (BIOS_WP)
The BIOS of the mainboard is inside the FWH. If the jumper BIOS_WP is set as closed, the
system BIOS is protected from being attacked by serious virus such as CIH virus, you will
be unable to flash the BIOS to the mainboard in this status.
Flash Write
BIOS_WP
The DMI (Desktop Management Interface) system information such as the CPU type/speed,
memory size, and expansion cards will be detected by the onboard BIOS and stored in the
flash ROM. Whenever the system hardware configuration is changed, DMI information will
be updated automatically. However, setting jumper BIOS_WP as closed makes flashing BIOS
and updating DMI information impossible. Therefore, set BIOS_WP as open when changing
the system hardware configuration, or the error message “Unknown Flash Type” will be dis-
played on the screen, and DMI information may not be updated.
Disabled
Flash Write
Enabled
(default)
19
P4I848PP4I848P
P4I848P
P4I848PP4I848P
Installation InstrInstallation Instr
Installation Instr
Installation InstrInstallation Instr
uctionuction
uction
uctionuction
Enable keyboard password power-on function (JKB)
The mainboard provides the advanced keyboard password power-on function. Before using
this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2 & pin3 closed for
disabling.
Disable
JKB
1 2 3
20
Enable
Furthermore in order to implement this function, set “POWER ON Function” to “Password”
and enter the keyboard power-on password in the “INTEGRATED PERIPHERALS” section
of the CMOS SETUP. Save and exit, then power off your system. In this case, the power
button’s power-on function is disabled.
Note:
1. If using this function, 5VSB line of the power supply should be
capable of delivering enough current for all the devices con
nected to the keyboard port, if not, you will be unable to power
up the system using the keyboard.
2. If you set JKB with pin2 & pin3 closed, set “POWER ON Func
tion” to BUTTON ONLY, don’t set it to Password, or you’ll be
unable to power up your system by the keyboard or the power
button.
3. If you encounter the above problems, clear CMOS and set
the jumper pin2 and pin3 closed to disable the function,them
power on the system by pushing the power button,and set
“power on Fuction” back to “Button Only”.
1 2 3
QDIQDI
QDI
QDIQDI
Chapter 2Chapter 2
Chapter 2
Chapter 2Chapter 2
Clear CMOS (CLR_CMOS)
If you want to clear CMOS, unplug the AC power supply first, close CLR_CMOS (pin1 &
pin2) once, set CLR_CMOS back to the normal status with pin2 & pin3 connected, then
power on the system.
Normal status
(default)
1
2
3
Clear CMOS
1
2
3
(Unplug the AC power supply)
Onboard LAN (LAN_EN)
If you want to use the onboard LAN, set LAN_EN with pin1&pin2 closed, Otherwise, set LAN_EN
with pin2&pin3 closed for disable this fuction.
Disable onboard LAN
3
1
LAN_EN
2
3
1
2
Enable onboard LAN
21
P4I848PP4I848P
P4I848P
P4I848PP4I848P
T-- This page is intentionally left blank --his
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Chapter 3
BIOS Description
The mainboard uses AWARD BIOS Setup program that
provides a Setup utility for users to modify the basic system configuration. The information is stored in CMOS
RAM so it retains the Setup information when the power
is turned off. This chapter provides you with the overview of the BIOS Setup.
23
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
24
AWDFLASH.EXE
This is a flash memory write/read utility used for the purpose of upgrading your BIOS when
necessary. Before doing so, please note:
We strongly recommend you only upgrade BIOS when encounter problems.
Before upgrading your BIOS, review the description below to avoid making mistakes, destroying the BIOS and resulting in a non-working system.
When you encounter problems, for example, you find your system does not support the
latest CPU released after our current mainboard, you may therefore upgrade the BIOS,
please don’t forget to set BIOS_WP as open and disable the “Flash Write Protect” item in
AWARD BIOS CMOS Setup first .
Follow the steps exactly for a successful upgrade.
1. Create a bootable system floppy diskette by typing Format A:/s from the DOS prompt
under DOS6.xx or Windows 9x environment.
2. Copy AWDFLASH.EXE(version>=8
CD to your new bootable diskette.
3. Download the updated BIOS file from the Website (http://www.qdigrp.com). Please be
sure to download the suitable BIOS file for your motherboard.
.24q) from the directory \Utility located on QDI Driver
4. Decompress the file download, copy the BIOS file (xx.bin) to the bootable diskette, and
note the checksum of this BIOS which is located in readme file.
5. Reboot the system from the bootable diskette created.
6. Then run the AWDFLASH utility at the A:\ prompt as shown below:
A:\AWDFLASH xxxx.bin
Follow the instruction through the process. Don’t turn off power or reset the system until
the BIOS upgrade has been completed.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
If you require more detailed information concerning AWDFLASH Utility, for example, the
different usage of parameters, please type A:\>AWDFLASH /?
Note:
Because the BIOS Software will be updated constantly, the following BIOS screens and descriptions are for reference purposes
only and may not reflect your BIOS screens exactly.
AWARD BIOS Description
Entering Setup
Power on the computer, when the following message briefly appears at the bottom of the
screen during the POST (Power On Self Test), press <Del> key to enter the AWARD BIOS
CMOS Setup Utility.
Press <Del> to enter SETUP
When you have entered, the Main Menu (Figure 1) appears on the screen. Use the arrow
keys to select among the items and press the <Enter> key to accept or enter the sub-menu.
25
Figure-1 Main Menu
Load Optimized Defaults
The Optimized Defaults are common and efficient. It is recommended users load the
optimized defaults first, then modify the needed configuration settings.
Standard CMOS Features Setup
The basic CMOS settings included in “Standard CMOS Features” are Date, Time, Hard
Disk Drive Types, Floppy Disk Drive Types, and VGA etc. Use the arrow keys to highlight
the item, then use the <PgUp> or <PgDn> keys to select the value desired in each item.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
26
Figure-2 Standard CMOS Setup Menu
For the items marked, press enter, a window will pop up as shown below. You can view
detailed information or make modifications.
Figure-2-1 IDE Primary Master Setup Menu
Hard Disk
Primary Master/Primary Slave/Secondary Master/Secondary Slave
These categories identify the HDD types of 2 IDE channels installed in the computer system.
There are three choices provided for the Enhanced IDE BIOS: None, Auto, and Manual. ‘None’
means no HDD is installed or set; ‘Auto’ means the system can auto-detect the hard disk when
booting up; by choosing ‘Manual’, the related information should be entered regarding the follow-
ing items. Enter the information directly from the keyboard and press < Enter>:
CYLS number of cylinders HEAD number of heads
PRECOMP write pre-compensation LANDZ landing zone
SECTOR number of sectors MODE
HDD access mode
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
The Award BIOS supports 3 HDD modes: CHS, LBA and LARGE.
CHS
Generic access mode in which neither the BIOS nor the IDE controller will make any transfor-
mation during accessing. The maximum number of cylinders, heads and sectors for CHS
mode are 1024,16 and 63.
If the user sets his HDD to CHS mode, the maximum accessible HDD size will be 528 mega-
bytes even though its physical size may be greater than that.
LBA (Logical Block Addressing) mode
A new HDD accessing method to overcome the 528 Megabyte bottleneck. The number of
cylinders, heads and sectors shown in setup may not be the number physically contained in
the HDD.
During HDD accessing, the IDE controller will transform the logical address described by
sector, head and cylinder number into its own physical address inside the HDD.
LARGE mode
Some IDE HDDs contain more than 1024 cylinder without LBA support (in some cases, users
do not want LBA). The Award BIOS provides another alternative to support these kinds of
HDD.
27
BIOS tricks DOS (or other OS) into divising the number of cylinders is less than 1024 by dividing
it by 2. At the same time, the number of heads is multiplied by 2. A reverse transformation process
will be made inside INT13h in order to access the right HDD address.
If using Auto detect, the BIOS will automatically detect the IDE hard disk mode and set it as
one of the three modes.
Remark
To support LBA or LARGE mode of HDDs, there must be some softwares involved which are
located in Award HDD Service Routine(INT13h).It may fail to access a HDD with LBA (LARGE)
mode selected if you are running under an Operating System which replaces the whole INT
13h.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
28
Video
Set this field to the type of video display card installed in your system.
EGA/ VGA Enhanced Graphics Adapter / Video Graphic Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters.
CGA 40 Color Graphic Adapter, powering up in 40 column mode.
CGA 80 Color Graphic Adapter, powering up in 80 column mode.
MONO Monochrome adapter, including high resolution monochrome
adapters.
Halt On
This category determines whether or not the computer will stop if an error is detected
during powering up.
No errors The system boot will not stop for any errors detected.
All errors Whenever the BIOS detects a non-fatal error, the system will
stop and you will be prompted.
All, But The system boot will not stop for a keyboard error; but it will
Keyboard stop for all other errors.
All, But The system boot will not stop for a disk error; but it will stop for
Diskette all other errors.
All, But The system boot will not stop for a keyboard or disk error, but it
Disk/Key will stop for all other errors.
Memory
This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS.
Base Memory The POST of the BIOS will determine the amount of base
(or conventional) memory installed in the system.
Extended The BIOS determines how much extended memory is
Memory presented
Total Memory Total memory of the system.
during the POST.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
QDI Innovation Features
Figure-3 QDI Innovation features Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
[SpeedEasy setting]
CPU Clock Ratio Min=8 Select the multiplication of processor core frequency. If
Max=50 a Ratio locked processor is installed, this item will be
hidden. This item is only for users understanding all the
CPU parameters.
29
Auto Detect Enabled Close empty PCI clock to reduce EMI.
PCI Clk Disabled Do not close empty PCI clock.
CPU Clock Min=100 Set CPU frequency.
Max=165
[BootEasy setting]
QDI BootEasy Enabled PC boot in rapid speed, without any redunant feature
feature waiting for the displaying of starting OS.
Disabled PC boot in the legacy BIOS way.
[LogoEasyII setting]
Show Bootup Logo Enabled The EPA logo can be shown when system boots show
up.
Disabled Close this function.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
30
[RecoveryEasyII setting]
Menu language Select English Select RecoveryEasyII Interface Menu language.
Chinese
Hotkey for NULL Backup/Recovery interface can not be used by
Backup/Recovery Pressing Hotkey.
F2~F12 Select Hotkey to enter Backup/Recovery interface
during POST.
[BIOS-protectEasy setting]
Flash Write Protect Enabled This option is for protecting the system BIOS,
Disabled when enabled, writing to BIOS area is to be discarded.
Warning:
Be sure your selection is right. CPU over speed will be
dangerous! We will not be responsible for any damages
caused.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Advanced BIOS Features Setup
Figure-4 Advanced BIOS Features Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
CPU L1&L2 Enabled Enable CPU L1/L2 cache.
Cache Disabled Disable CPU L1/L2 cache.
Hyper-Threading Enabled Enable Hyper-Threading.
Technology Disabled Disabled Hyper-Threading.
31
Quick Power Enabled Allow the system to skip certain tests while booting.
On Self Test This will decrease the time needed to boot the system.
Disabled Normal POST.
First (Second, Disabled Select Your Boot Device Priority. It could be Disabled,
Third) Boot Device Floppy Floppy, LS200, Hard Disk, CDROM, ZIP100, USB-FDD,
Boot Other Device LAN USB-ZIP,USB-CDROM,LAN
Swap Floppy Drive Enabled If the system has two floppy drives, choose enable
Disabled to assign physical drive B to logical drive Aand vice-
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
32
Boot Up On Keypad is used as number keys.
NumLock Status Off Keypad is used as arrow keys.
Gate A20 Option Normal The A20 signal is controlled by the keyboard
controller.
Fast The A20 signal is controlled by Port92.
Typematic Rate Enabled Keystrokes repeat at a rate determined by the
Setting Disabled keyboard controller - when enabled, the typematic
-ate and typematic delay can be selected.
Typematic Rate 6-30 The rate at which character repeats when you
(chars/sec) hold down a key.
Typematic Delay 250-1000 The delay before keystrokes begin to repeat.
(Msec)
Security Option Setup Select whether the password is required every time
System the system boot or only when you enter setup.
APIC Mode Enabled Enable the APIC mode(Advanced Programmable
Interrupt Controller).
Disabled Disabled the APIC mode.
MPS Version 1.1/1.4 Set the MPS Version Control for OS
Control for OS
OS Select For Non-OS2 Select OS2 only if you are running OS/2 operating
DRAM>64MB OS2 system with more than 64MB of RAM.
HDD S.M.A.R.T. Enabled Enable hard disk S.M.A.R.T. support.
Capability Disabled Invalidate this feature.
Report NO FDD Yes Report NO Floppy Disk Drive for WIN 95 to release
for WIN 95 IRQ6.
No Do not report No Floppy Disk Drive for WIN 95.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Advanced Chipset Features Setup
Figure-5 Advanced Chipset Features Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
DRAM Timing Manual DRAM timing is defined by user.
Selectable By SPD DRAM timing is defined by SPD.
CAS Latency Time 2~3 Set CAS latency time.
33
Active to Precharge 5,6,7,8 Set precharge delay time.
Delay
DRAM RAS# to 2,3,4 Set DRAM RAS# to CAS# delay 2 SCLKs,3 SCLKs
CAS# Delay or 4 SCLKs.
DRAM RAS#Precharge 2,3,4 Set DRAM RAS# precharge as 2,3 or 4.
Memory Frequency Auto Set Memory Frequency
For DDR266
DDR320
DDR333
DDR400
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
System BIOS Enabled Besides conventional memory, the system BIOS area
Cacheable is also cacheable.
Disabled System BIOS area is not cacheable.
Video BIOS Enabled Besides conventional memory, video BIOS area is
Cacheable also cacheable.
Disabled Video BIOS area is not cacheable.
Memory hole at Enabled Memory hole at 15-16M is reserved for expanded
15M-16M ISA card.
Disabled Do not set this memory hole.
Delay Prior to 4/8/16Min Setting time for CPU automatically enters thermal mode
thermal 32Min
AGP 4/8/16/32 Set the effective size of the Graphics Aperture to be
Aperture Size 64/128 used in the particular GART Configuration.
256MB
34
Init Display First PCI Slot Initialize the PCI VGA first.
Onboard/AGP Initialize the onboard/AGP first.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Power Management Setup
Figure-6 Power Management Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
ACPI function Enabled Enable ACPI function.
ACPI Suspend S1(POS) Select the ACPI suspend type.
Type S3(STR)
S1&S3
35
User Define Users can configure their own Power Management Timer.
Management Min Saving Pre - defined timer values are used. All timers are in their
MAX values.
Max Saving Pre - defined timer values are used. All timers are in their
MIN values.
Video Off Blank Screen The system BIOS will only blank off the screen when
Method disabling video.
V / H SYNC + In addition to Blank Screen, BIOS will also turn off the
Blank DPMS V-SYNC & H - SYNC signals from VGA card to monitor.
This function is enabled only for VGA cards supporting
DPMS.
Note: When the green monitor does not detect the
V/H-SYNC signals, the electron gun will be turned off.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
36
Video Off In Yes The system will disable video when entering suspend
Suspend mode.
No Do not turn off video when entering suspend mode.
Suspend Type Stop Grant Select the Suspend type.
PwrOn Suspend
MODEM Use 3,4,5,7,9,10,11 Special Wake-up event for Modem.
IRQ NA This function is not applied.
Suspend Mode Disabled The system never enter Suspend mode by timer.
1Min ~ 1Hour Define the continuous idle time before the system enters
Suspend mode. If any items defined in “PM Events” are
on and activated, the system will be woken up.
HDD Power Disabled HDD’s motor will not be off by timer.
Down 1 - 15 Min Define the continuous HDD idle time before the HDD
enters power saving mode (motor off).
Soft-Off by Instant-Off The system will immediately power off once the power
PWR-BTTN button is pressed.
Delay 4 sec The system will power off when power button is pressec
for 4 seconds.
CPU THRM- 12.5%, 25%, Select the duty cycle of the STPCLK signal, slowing down.
Throttling 37.5%, 50%, the CPU speed when the system enters green mode.
62.5%, 75%,
87.5%
Wake-Up by PCI Enabled Allow the system to be waked up by PCI card.
card Disabled Do not allow the system to be powered on by PCI card.
Power on by Enabled Allow the system to be powered on when a Ring indicator
Ring signal comes up to COM1 or COM2 from external modem
Disabled Do not allow Ring wake up.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
USB KB Wake Up Enabled The system could be waked up by USB devices from the
From S3 S3 status.
Disabled The system cannot be waked up by USB devices from the
S3 status.
Resume Enabled RTC alarm can be used to generate a wake-up event to
by Alarm power up the system.
Disabled RTC has no alarm function.
Date( of Month ) Sets the date of RTC.
Alarm
Time Alarm Sets the resume time of RTC.
Primary/Secondary Enabled Reload global timer, when there’s an IDE event.
IDE 0/1 Disabled Do not reload global timer.
FDD/COM/LPT Enabled Reload global timer, when there’s a FDD/COM/LPT event.
Port Disabled Do not reload global timer.
PCI PIRQ[A - D] # Enabled Reload global timer, when there’s a PCI event.
Disabled Do not reload global timer.
37
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
38
PNP/PCI Configurations Setup
Figure-7 PNP/PCI Configurations Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
Reset Configuration Enabled The system BIOS will reset configuration data once
Data then automatically set this item as disabled.
Disabled Disable this function.
Resources Manual Assign the system resources manually.
Controlled By Auto(ESCD) Assign system resources automatically by BIOS.
PCI/VGA Palette Enabled Enable PCI/VGA Palette Snoop.
Snoop Disabled Disable PCI/VGA Palette Snoop.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Integrated Peripherals
Figure-8 Integrated Peripherals Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
IDE HDD Block Enabled Allow IDE HDD to read/write several sectors once.
Mode Disabled IDE HDD only reads/writes a sector once.
39
On-Chip Primary/ Enabled On-Chip Primary/Secondary PCI IDE is enabled.
Secondary PCI IDE Disabled On-Chip Primary/Secondary PCI IDE is disabled.
IDE Mode 0 - 4 Define the IDE primary/secondary master/slave PIO
Primary/ Secondary mode.
Master/Slave PIO Auto The IDE PIO mode is defined by auto -detection.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
40
Disable this function.
USB/USB2.0 Enabled Enable onchip USB controller.
Controller Disabled Disable onchip USB controller.
USB Keyboard/ Enabled Support USB Keyboard under legacy OS.
Mouse Support Disabled Do not support USB Keyboard under legacy OS.
AC97 Audio Auto If audio codec was installed on board, the AC97 Audio
function can be used. otherwise, the function is disabled.
Disabled Disable the AC97 Audio onboard.
AC97 Modem Auto If modem codec was installed on board, the AC97 modem
function can be used. otherwise, the function is disabled.
Disabled Disable the AC97 Modem onboard.
Power On Button only Power on by power button.
Function Password Power on with keyboard password.
KB Power ON Enter Enter keyboard password.
Password
Onboard FDC Enabled Onboard floppy disk controller is enabled.
Controller Disabled Onboard floppy disk controller is disabled.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Onboard 3F8/IRQ4 Define the onboard serial port address and required
Serial Port 1/2 2F8/IRQ3 interrupt number.
3E8/IRQ4
2E8/IRQ3
Auto Onboard serial port address and IRQ are automatically
assigned.
Disabled Onboard serial port is disabled.
UART Mode Normal, IrDA Set UART mode.
Select ASKIR
RxD, TxD Active Hi, Lo/Lo, Hi Default is recommended.
Lo, Lo/ Hi, Hi
IR Transmission Enabled Enable IR Transmission delay function.
Delay Disabled Disable IR Transmission delay function.
UR2 Duplex Half Default is recommended.
Mode Full
Use IR Pins IR-Rx2Tx2 Default is recommended.
RxD2, TxD2
Onboard Parallel 378/IRQ7 Define parallel port address and IRQ channel.
Port 278/IRQ5
3BC/IRQ7
Disabled Onboard parallel port is disabled.
Parallel Port Mode SPP Define the parallel port mode.
EPP
ECP
ECP+EPP
Normal
EPP Mode Select EPP1.7 Set EPP Mode as EPP 1.7 or EPP1.9 Version.
EPP1.9
ECP Mode Use 3 Set ECP Mode Use DMA 1 or 3.
DMA 1
P4I848PP4I848P
P4I848P
P4I848PP4I848P
41
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
42
PWRON After OFF,ON The system remains OFF/ON/Former state when the AC
PWR-Fail Former-Sts power supply resumes.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
PC Health Status
Figure-9 PC Health Status Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
CPU Warning 500C/1220F An alarm will beep when the CPU temperature reaches
Temperature 530C/1270F the previous setting, 500C/1220F, 530C/1270F,560C/1330F,
560C/1330F 600C/1400F, 630C/1450F, 660C/1510F,700C/1580F,
600C/1400F 750C/1670F, 800C/1760F, 850C/1850F,900C/1940F, 950C/
630C/1450F 2050F.
660C/1510F
700C/1580F
750C/1670F
800C/1760F
850C/1850F
900C/1940F
950C/2050F
Disabled No alarm beep.
43
Current System The temperature inside the chassis.
Temp.
Current CPU The temperature of CPU.
Temperature
P4I848PP4I848P
P4I848P
P4I848PP4I848P
BIOS DescriptionBIOS Description
BIOS Description
BIOS DescriptionBIOS Description
44
Current PWRFAN RPM (Revolution Per Minute) Speed of fan which is
Speed connected to the fan header, CPUFAN or PWRFAN.
Current CPUFAN Fan speed value is based on an assumption that
Speed tachometer signal is two pulses per revolution. In
other cases, you should regard it relatively.
Vcore(CPU) Display current voltage value including all significant
Voltage, voltages of the mainboard. +3.3V, +5V, +12V, -12V are
+3.3V voltages from the power supply.
+5 V
+12 V
-12 V Vcore (CPU) Voltage is the CPU core voltage from the
VBAT Voltage on board switching Power Supply. The VBAT Voltage is
5V Standby Voltage the voltage of battery.
Shutdown 600C/1400F The system will shut down automatically under the ACPI
Temperature 650C/1490F OS when the CPU temperature reaches the previous
700C/1580F setting.
750C/1670F
Disabled The system remains on regardless of how much the
CPU temperature is.
QDIQDI
QDI
QDIQDI
Chapter 3Chapter 3
Chapter 3
Chapter 3Chapter 3
Password Setting
When this function is selected, the following message appears at the center of the screen to
assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password typed now will
clear any previously entered password from CMOS memory. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort
the selection.
To disable password, just press <Enter> when you are prompted to enter password. A mes-
sage will confirm the password being disabled. Once the password is disabled, the system will
boot and you can enter BIOS Setup freely.
PASSWORD DISABLED
If you have selected “System” in “Security Option” of “BIOS Features Setup” menu, you will be
prompted for the password every time the system reboots or any time you try to enter BIOS
Setup.
45
If you have selected “Setup” at “Security Option” from “BIOS Features Setup” menu, you will be
prompted for the password only when you enter BIOS Setup.
Supervisor Password has higher priority than User Password. You can use Supervisor Pass-
word when booting the system or entering BIOS Setup to modify all settings. Also you can
use User Password when booting the system or entering BIOS Setup but can not modify any
setting if Supervisor Password is enabled.
Boot with BIOS defaults
If you have made all the changes to CMOS values and the system can not boot with the
CMOS values selected in setup, clear CMOS after power-down, then power on again.
System will boot with BIOS default settings.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
46
AppendixAppendix
Appendix
AppendixAppendix
AA
ppendixppendix
A
ppendix
AA
ppendixppendix
QDI Utility CD
A QDI Utility CD is supplied with this mainboard, the contents contained in it are showed as
below:
1. Driver Install
Using this choice, you can install all the drivers for your mainboard . You should install
the drivers in order, and you need to restart your computer until all the drivers are installed.
A. Chipset software B. Network Driver(optional)
C. Audio Driver(optional) D. USB2.0 Driver(optional)
E. DirecrX F. IAA Setup
2. Accessory
A. Norton AntiVirus 2003 B. QFlashV1.0
3. Browse CD
You could read all the contents contained in this CD, including Utility and Documents.
The files included in Utility are:
A. Awdflash.exe B. Cblogo.exe
C. Lf.exe
The files included in Documents are:
A. Adobe Acrobat Reader V5.0
Norton AntiVirus
When you install Norton AntiVirus and accept options, your computer is safe. Norton AntiVirus
automatically checks boot records for viruses at system startup, checks programs for viruses at the time you use them, scans all local hard drives for viruses once per week, and
monitors your computer for any activity that might indicate the work of a virus in action. It
also scans files you download from the internet and checks floppy disks for boot viruses
when you use them.
The list below shows the most important tasks Norton AntiVirus helps you perform:Scan for
viruses on your computer;Remove viruses from your computer;Update your virus protection with LiveUpdate;Quarantine an infected file. you can go to the Symantec Web site to
view an online tutorial: http://www.symantec.com/techsupp/tutorial
QDIQDI
QDI
QDIQDI
LogoEasy II
Thank you for using QDI upgraded innovation--- LogoEasy II, which is completely compat-
ible with LOGOEASY. LOGOEASY II can be easily operated in a Windows environment,
following in steps with the trend. It has added the functions of supporting JPEG images and
true color display of 64K and 16M colors with regard to JPEG-format graphics files and the
high-precision display equipment, which are now widely used.
LOGOEASY II supports the high-resolution 640x480 or 800x600 image display and full-screen,
top right corner or bottom right corner display. It also supports simultaneous display of logo
and sign-on message of the BIOS testing system. LOGOEASY II is a tool that can be operated in multi-platforms to refresh and change LOGO graphics including DOS, WINDOWS
9X, WINDOWS NT, WINDOWS ME and WINDOWS XP. In particular, the tools under the
interface of WINDOWS are simple and easy to operate. It teaches you by taking your hand
how to change LOGO.
47
When you power on or reset your system, the picture
shown below will be displayed on the screen.
You can use “LogoEasy II” to replace it by any other
logo which you want.
We provide two Utilities in the QDI Driver CD , which
bring user the following two means to select:
P4I848PP4I848P
P4I848P
P4I848PP4I848P
48
AppendixAppendix
Appendix
AppendixAppendix
A. Using CBLOGO.EXE Utility (Under DOS ):
1. Copy “CBLOGO.EXE”and “AWDFLASH.EXE” from the directory \Utility located on QDI
Driver CD to your hard disk.
2. Get the BIOS file from “AWDFLASH.EXE” or Download the BIOS file from the Website
(http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your harddisk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by “CBLOGO.
EXE” command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS to motherboard by “AWDFLASH.EXE”. For example: AWDFLASH xxxxxx.
bin
B. Using QFlash (Under Windows ):
1.Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it fromQDI
Driver CD.
2.Run QFlash program step by step, following the directions until complete it .
3.Reboot the system, you can see the new picture displayed on the screen.
Note: If you require more parameters information concerning “CBLOGO.EXE”,
please refer to the online help. If you don’t prefer the logo displayed
on the screen during bootup, set the “Show Bootup Logo” option as
Disabled in CMOS Setup.
BIOS_ProtectEasy
The BIOS of the mainboard is contained inside the Flash ROM. Severe viruses such as CIH
virus are so dangerous that it may overwrite the BIOS of the mainboard. If the BIOS has been
damaged, the system will be unable to boot. We provide the following solution which protects
the system BIOS from being attacked by such viruses.
There are two choices which implements this function.
1.Set the jumper (BIOS_WP) as closed, the BIOS can not be overwritten.
2.Set the jumper (BIOS_WP) as opened, meanwhile set “Flash Write Protect” as Enabled in
CMOS Setup.In this way, the BIOS can not be overwritten, but the DMI information can be
updated.
QDIQDI
QDI
QDIQDI
RecoveryEasy II
Introduction:
RecoveryEasy II — the latest edition of RecoveryEasy, providing a more easy-tooperate and
more secure and reliable tool for backing up and recovering the hard disk data. It will make
your data on the hard disk more secure, and make your computer more reliable. RcoveryEasy
II will bring you invaluable experiences. It allows you to experience unprecedented security
and reliability with its one-hotkey backup, one-hotkey recovery and powerful virus-free functions.
Features:
RcoveryEasy II has the following features:
Secure Backup
(1) Backup area can be reserved automatically in the High Memory Block (HMB)
and all of partitions can be adjusted automatically .
(2) Backup area is invisible to any operating system and its upper software, making
it impossible to be attacked completely.
Ease to Operate
(1) RcoveryEasy II is supported in both Chinese and English. You can easily enter
Backup or Recover interface by simply pressing hotkeys. Backup or recover
operation can be done with simple choices.
(2) User are not required to define the size of backup area. When backup start, it will
automatically allocate an area in the High Memory Block (HMB) of hard disk as
backup area upon the necessity of data storage, so as to improve the utilization
of hard disk space.
Adavantage Function
(1) Multiform partition format can be supported in RecoveryEasy II, including FAT16,
FAT32, NTFS etc.
(2) The capability of supportable Hard Disk is up to 137GB.
Flexible Combination
The hard disk data can be choosed to be protected and restored as required.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
49
50
AppendixAppendix
Appendix
AppendixAppendix
The following attachment is Backup and Recovery Function table:
Menu Language and Hotkey Selection
Please press “DEL” key to enter CMOS setup during the POST(Power On Self Test), then
user can see [RecoveryEasyII Setting] items of the “QDI Innovation features” menu, in
which the language on RecoveryEasyII interface and hotkey could be selected .
Backup Backup content Restore content
Partition Table Partition Table Partition Table
System Partition System Partition+Partition Table System Partition, PartitionTable
Whole Disk All Partitions+Partition Table System Partition, PartitionTable,
Whole Disk
CMOS Setup CMOS Setup CMOS Setup
figure-1 QDI Innovation Features
1. Menu language Select
We provide two menu language for user to select, English is the default.
2 . Hot key for Backup
There are 12 options, including NULL and F2~F12. Key F11 is default. If NULL is
selected, Backup interface can not be used with pressing hotkey. If you select one key
of the rest 11options, you can enter Backup interface by pressing the hotkey you setup
during POST.
QDIQDI
QDI
QDIQDI
3. Hot key for Recovery
There are 12 options, including NULL and F2~F12. Key F12 is default. If NULL is selected,
Restore interface can not be used with pressing hotkey. If you select one key of the rest
11 options, you can enter Recover interface by pressing the hotkey you setup during
POST.
Note:
If the Backup hotkey and Recover hotkey have been set with
the same key, the default will be Backup hotkey.
Hard Disk Selection Menu
If you installed the system with several IDE
hard disks, and you have pressed the
backup or restore hotkey during POST, hard
disk selection menu will popup before you
enter backup or recovery interface, in which
all of the IDE hard disks installed on your
system will be listed. You can scroll the high-
light bar to the hard disk you want to work
with using arrow key. Press ENTER to
confirm, and the following operation will be
performed on the selected hard disk:
figure-2 Hard Disk Select
Backup Function Introduction
Press Backup Hotkey to enter Backup Interface during the POST(Power On Self Test),
then the follwing interface will appear. You can scroll the highlight bar to the option you
want to work with using arrow key. Press ENTER to confirm.
51
figure-3 Backup Interface
1 Backup Partition Table
2 Backup System Partition C:
3 Backup Whole Disk
4 Backup CMOS Setup
5 Free Backup Area
6 Exit Backup Menu
P4I848PP4I848P
P4I848P
P4I848PP4I848P
52
AppendixAppendix
Appendix
AppendixAppendix
1 Backup Partition Table
2 Backup System Partition
It is used to backup the system partition of current hard
disk. It makes a backup of the data in the bootable par-
tition (actived partition) of current hard disk, as well as
the partition table.
3 Backup Whole Disk
It makes a backup of all the useful data on the hard
disk, including partition table and the data in all partitions.
4 Backup CMOS Setup
It is used to backup the settings you have made in the
CMOS Setup.
5 Release Backup Area
It is used to unload the backup data on the hard disk,
freeing the hard disk space.
6 Exit Backup Menu
It is used to Exit Backup Interface.
figure-4 Backup process
Recovery Function Introduction
Press Recovery Hotkey to enter Recovery Interface duringthe POST(Power On Self Test),
then the follwing interface will appear. You can scroll the highlight bar to the option you
want to work with using arrow key. Press ENTER to confirm.
QDIQDI
QDI
QDIQDI
figure-5 Recover Interface
1.Recover Partition Table
It used to restore the partition table data stored in
backup area to current Hard Disk.
2.Recover System Partition
It used to restore the system partition data stored
in current backup area to current system partition.
If current system partition doesn’t match the backup
system partition, a warning will be displayed indi-
cating the recovery fails. This feature will only re-
store the bootable partition and contents in other
partitions will be untouched.
3.Recover Whole Disk
It used to restore all the Hard Disk data stored in
current backup area to current Hard Disk. This op-
eration will restore the partition table and data in all
partitions, as a result, existing data in current Hard
Disk will be overwritten.
1 Recover Partition Table
2 Recover System Partition
3 Recover Whole Disk
4 Recover CMOS Setup
5 Exit Backup Menu
53
4.Recover CMOS Setup
This will restore the latest backup of the CMOS Set-
tings you have made to the current CMOS.
figure-4 Recover process
P4I848PP4I848P
P4I848P
P4I848PP4I848P
54
AppendixAppendix
Appendix
AppendixAppendix
Procedures:
CPU SpeedEasy Setup Menu
Select <QDI Innovation features> item from the main menu and enter the sub-menu:
SpeedEasy
1. Correctly insert the your CPU.
2. Plug in other configurations and restore the system.
3. Switch on power to the system and press the <Del> key to enter BIOS Setup.
4. Enter “QDI Innovation features” menu to set up the CPU speed.
5. Save and exit BIOS Setup, your system will now boot successfully.
QDI Innovation features Menu
BIOS provides you with a set of basic values for your processor selection instead of the
jumper settings. The processor speed can be manually selected on the “QDI Innovation
features” menu screen.
Warning:
Do not set CPU frequency higher than its working frequency. If you do,
we will not be responsible for any damages caused.
QDIQDI
QDI
QDIQDI
BootEasy
BootEasy technology enormously improves the long BOOT process time of computers. Re-
ducing the wait time every user has to suffer when starting their computer. BIOS without
BootEasy has to perform many routines every time when the system starts, such as checking
system core of the computer and initializing system peripherals. Now with the BootEasy,
BIOS will not run these repetitive Processes any longer , PC can boot-up without any redun-
dant waiting for the displaying of starting OS. BootEasy is quite easy to use , choose the right
option in CMOS SETUP, ( refer to QDI Innovation features) it can be easily booted quickly.
BootEasy save all the information when PC first normally boot-up, and it restores all the pa-
rameters for the system and thus let the PC boot freely and rapidly.
55
Note:
1. Under the following conditions, PC will boot-up in normal way.
(1) PC boot-up for the first times after set option as Enabled.
(2) The system information saved by BIOS was damaged.
(3) PC fail to boot-up continually over three times.
Setting the jumper BIOS_WP as open if you encounter the
above conditions.
2. Don’t power off or reset system while BootEasy initializing.
3. Set “QDI BootEasy Feature” as “Disabled” before you replace
system equipment.set “QDI BootEasy Feature” as “Enabled”
after you accomplished replacing.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
AppendixAppendix
Appendix
AppendixAppendix
Using 4/6-Channel Audio
The motherboard is equipped with Realtek ALC655 chip, which provides support for 6-channel
audio output, including 2 Front, 2 Rear, 1 Center and 1 Subwoofer channel. ALC655 allows the
board to attach 4 or 6 speakers for better surround sound effect. The section will tell you how
to install and use 4/6-channel audio function on the board.
Installing the Audio Driver
You need to install the driver for Realtek ALC655 chip to function properly before you can get
access to 4-/6-channel audio operations. Follow the procedures described below to install the
drivers for different operating systems.
Installation for Windows 98SE/ME/2000/XP
The following illustrations are based on Windows ® XP environment and could look slightly
different if you install the drivers in different operating systems.
56
1. Insert the companion CD into the CD-ROM drive. The setup screen will
automatically appear.
2. Select the Sound Driver.
3. Click Next to start installing files into the system.
click here
QDIQDI
QDI
QDIQDI
4. Click Finish to restart the system.
Select this
option
Click here
Attaching speakers
To perform multichannel audio operation, connect multiple speakers to the system. You should
connect the same number of speakers as the audio channels you will select in the software
utility.
2-Channel Analog Audio Output
The audio connectors on the back panel already provide 2-channel analog audio output
function. The back panel’s audio connectors can be transformed to 4/6-channel analog audio
connectors automatically when you select correct setting in the software utility. For informa-
tion about the setting, refer to Selecting 4- or 6-Channel Setting later in the section.
Make sure all speakers are connected to Line Out connectors. Diverse connector configura-
tions for 2-, 4- and 6-channel using back panel connectors are described below:
57
P4I848PP4I848P
P4I848P
P4I848PP4I848P
58
AppendixAppendix
Appendix
AppendixAppendix
Description:
Line Out, Line In and MIC functions all exist under 2-channel configuration.
Description:
Line In is converted to Line Out function under 4-channel configuration.
QDIQDI
QDI
QDIQDI
6-Channel Analog Audio Output
Description:
Both Line In and MIC are converted to Line Out function under 6-channel configuration.
59
P4I848PP4I848P
P4I848P
P4I848PP4I848P
60
AppendixAppendix
Appendix
AppendixAppendix
Selecting 4- or 6-Channel Setting
1. Click the audio icon from the window tray at the bottom of the screen.
2. Select any surround sound effect you prefer from the “Environment” pull-down menu under
the Sound Effect tab.
3. Click the Speaker Configuration tab.
QDIQDI
QDI
QDIQDI
4. The following window appears.
5. Select the multi-channel operation you prefer from No. of Speakers.
6. Click OK
Testing the Connected Speakers
To ensure 4- or 6-channel audio operation works properly, you may need to test each
connected speaker to make sure every speaker work properly. If any speaker fails to sound,
then check whether the cable is inserted firmly to the connector or replace the bad speakers
with good ones.
61
Testing Each Speaker
1. Click the audio icon from the window tray at the bottom of the screen.
2. Click the Speaker Test tab.
P4I848PP4I848P
P4I848P
P4I848PP4I848P
62
AppendixAppendix
Appendix
AppendixAppendix
3. The following window appears.
4. Select the speaker which you want to test by clicking on it.
Playing KaraOK
The KaraOK function will automatically remove human voice (lyrics) and leave melody for you
to sing the song. The function is applied only for 2-channel audio operation, so make sure
“2 channels mode” is selected in the “No. of Speakers” column before playing KaraOK.
Playing KaraOK
1. Click the audio icon from the window tray at the bottom of the screen.
2. Make sure the Sound Effect tab is selected.
QDIQDI
QDI
QDIQDI
3. Select Voice Cancellation in the “Karaoke” column.
4. Click OK.
63
P4I848PP4I848P
P4I848P
P4I848PP4I848P
64
AppendixAppendix
Appendix
AppendixAppendix
CPU Installation Procedures
1. Pull the lever sideways away from
the socket. Then, raise the lever up
to a 90-degree angle.
2. Look for the cut edge. The cut edge
should point towards the lever pivot.
The CPU will only fit in the correct
orientation. If the CPU is correctly
installed, the pins should be com-
pletely embedded into the socket
and can not be seen.
3. Hold the CPU down firmly, and then
close the lever to complete
installation.
Warning: Overheating will seriously damage the CPU and system, always
make sure the cooling fan can work properly to protect the CPU
from overheating.
QDIQDI
QDI
QDIQDI
Mainboard Layout
P4I848P
Note:
The layout includes all options.
It is for your reference only.
CD_IN
AUX_IN
MODEM
6CH-BRACKET
F_AUDIO
F_1394
LAN_EN
Top :Line in
Middle:Speaker out
Bttm:Mic. in
JFSB1(optional)
JFSB0(optional)
JUSB(optional)
Top :LAN(optional)
Bttm: USB3,4
ATX 12V
Top :IEEE 1394(optional)
Bttm: USB1,2
SPDIF
UART 1
Parallel Port
Top :PS/2 Mouse
Bttm:PS/2 Keyboard
JKB
SMBUS
PCI 5
PCI 4
USB5_6
PCI 3
JFUSB(optional)
USB7_8
PCI 2
PCI 1
AGP
North Bridge
FDD
South Bridge
1
2
5
3
4
6
7
PWR_FAN
WOM
IrDA
BIOS_WP
CLR_CMOS
CHSSC
SATA1
DIMM1
DIMM2
IDE1
SATA2
Note: Pin1 for all jumpers are located on the side with black line.
1. HDD_LED 2. ACPI_LED 3. POWER SW 4. HDD-LED 5. SPEAKER 6. RESET 7.POWER LED
IDE2
Socket 478
CPU_FAN
ATX_ POWER
Loading...