QD QuickDraw 300 User Manual

LED RING

Signals power on & power down phases.

HEATING BUTTON

Triggers smart-heating for optimal
vapor production.

INDICATOR RING

Tri-color interface indicates chamber
temperature & readiness.

300 CLASS CARTRIDGE

Cartridges lock into place magnetically.

MAGNETIC
CHARGING PORT

Locks USB charger into
place magnetically.

QUICKDRAW 300

TRIPLE-ACTION VAPORIZER

With three material-specific cartridges, the QuickDraw 300
smart-heats dry herb, liquid, and extract to the precise
temperatures at which each medium produces rich,
flavorful vapor.

300

TRIPLE-ACTION VAPORIZER

USER

GUIDE

WWW.HOLDYOURFIRE.COM

PLEASE CONTACT QUICKDRAW’S

EXPERT SUPPORT TEAM WITH ANY

QUESTIONS OR CONCERNS.

1 [phone]

Visit HoldYourFire.com for
product news & updates or to
view QuickDraw’s entire line of
vaporizers & accessories.

©2014 QD Products, LLC.
QuickDraw, and the QuickDraw
logo, are trademarks of QD
Products, LLC.
All rights reserved.

PREPPING THE QUICKDRAW 300

FAST CHARGING

To fully charge the QuickDraw 300 before use, attach the mag­netic charger tip to the end of the device & insert the cord into a
USB port. Both the LED Ring and Indicator Ring will flash white
to signal charging. The Indicator Ring will turn red intermittently
while charging, and will turn green when the device is fully charged.

• LED Ring & Indicator Ring will flash white twice to signal a
recharge is needed.

• The QuickDraw 300 is specifically designed to allow use
while charging.

UNLOCKING THE QUICKDRAW 300

The QuickDraw 300 is equipped with a 3-click battery lock to pre­vent unintentional activation. Pressing the heating button 3 times
rapidly will unlock the device for use, which the Indicator Ring will
signify by flashing white.

To lock the QuickDraw 300, press the heating button rapidly in
the same fashion. The Indicator Ring will flash red to signal the
device is locked.

EXTRACT

• Unscrew mouthpiece from cartridge body

• Place extract in chamber, below overflow line

• Reattach mouthpiece & slide cartridge into vaporizer chassis

• Unlock QuickDraw 300

• Press & hold button as you draw

• QuickDraw 300 will auto-deactivate after 30 seconds to
prevent undesired use

CARTRIDGE PREPARATION & USE

DRY

• Remove mouthpiece from cartridge body

• Place shredded dry herb loosely in chamber, below white
chamber wall

• Replace mouthpiece & slide cartridge into vaporizer chassis

• Unlock QuickDraw 300

• Press & hold button for 3 seconds to begin precision-heating

• QuickDraw 300’s LED Ring will glow green when ready for use

• Draw from mouthpiece, without pressing or holding button

• Press and hold button for 3 seconds to deactivate

• QuickDraw 300 will auto-deactivate after 2 minutes to prevent
undesired use

LIQUID

• Unscrew mouthpiece from cartridge body

• Fill chamber with liquid, below overflow line

• While filling, hold cartridge at an angle to prevent liquid from
entering central vapor path

• Reattach mouthpiece & slide cartridge into vaporizer chassis

• Unlock QuickDraw 300

• Press & hold button as you draw

• If held for longer than 10 seconds, QuickDraw 300’s LED Ring
will flash before device shuts down, preventing undesired use

Unpack & fully
charge device.

Replace mouth­piece & slide
cartridge into
vaporizer chassis.

1 2

43

CARTRIDGE MAINTENANCE

The QuickDraw 300 comes equipped with a kit of cleaning and

maintenance tools that should be used regularly to clear the device

and its cartridges of debris. Regular cleaning will ensure long

cartridge life.

Unscrew cartridge
mouthpiece and fill
chamber.

Press heating
button 3 times
rapidly to unlock
device for use.