User manual
Stereo
Bluetooth
Headset
QB
Sport
Contents
BRIEF INTRODU CTION 1
- Bluetooth wireless communication technology 1
- About QB Sport 1
BEFORE USE 2
- Overview 2
- Charging the headset 3
HOW TO USE 4
- Turning on/off the headset 4
- Pairing the headset with Bluetooth devices 4
• How to enter pairing mode 4
• Pairing the headset with a Bluetooth cell phone 5
• Pairing the headset with a Bluetooth transmitter 6
• Multi-pairing 6
- Re-connecting with a Bluetooth device 7
- Wearing the headset 8
- Making a call with the headset 8
- Music playback 9
- LED indicator 10
- lndication tone 11
CARE A ND MAINTENANCE 11
FAQs 12
SPECIFICATIONS 13
Welcome to use this Bluetooth stereo headset, QB Sport.
Please read this user's manual carefully before use.
Brief introduction
Bluetooth wireless communication technology
Bluetooth is a standard of close range radio-communication technology that
was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones,
computers, printers, PDAs and other devices. The max transmission range of
class II is 10 meters while the max transmission range of class I can reach up to
100 meters.
About QB Sport
QB Sport is a Bluetooth stereo headset. It's folding and retractable design is
very easy to take with you. It supports the following Bluetooth proles:
HSP Headset Prole
HFP Hands-free Prole
A2DP Advanced Audio Distribution Prole
AVRCP AudioNideo Remote Control Prole
You can enjoy music wirelessly by using QB Sport It has the following features:
a) Pairing with a Bluetooth cell phone or PDA supporting HFP prole.
• Answer a call, end a call and reject a call
• Redial last number
• Voice dial
• Adjust the volume
• Call transfer between the headset and your Bluetooth cell phone
• Microphone mute
b) Pairing with a Bluetooth music device or Bluetooth transmitter supporting
A2DP prole.
• Enjoy music wirelessly
1
• Adjust the volume
• Remote control pause/play
• Remote control previous/next track
c) Easy to switch between the call and music, you will not miss the incoming call
during listening to music.
d) Every time the headset is tured on, it will connect to last connected device au-
tomatically.
Note: Even though the paired device and the headset support the same Blue-
tooth proles, functions may vary due to specication differences of the
paired devices.
Before use
Overview
1 7 Previous track
2 q Multi-function button (MFB)
3 8 Next track
4 LED indicator
5 Headband
2
6 Folding and retractable headhand
7 Right loudspeaker
8 Left loudspeaker
9 Microphone
10 Micro USB Charging jack
11 VOL + Volume up
12 VOL – Volume down
Charging the headset
The headset comes with a built-in rechargeable battery, prior to using it, it is
recommendable to charge the battery fully for the rst time.
When the headset is low power, red LED ashes twice and the headset emits
three "Dong" tones every 20 seconds. Please recharge the battery of the headset.
Using travel charger
Connect the charger to a standard power outlet and the charger plug to the
charging jack of the headset. Red LED is on while charging. It takes about 2
hours to charge the battery fully. When charging has completed, red LED
will be off.
Using USB cable
Connect the USB cable to an computer USB port and the USB cable plug to
the charging jack of the headset. Red LED is on while charging. It takes about
2 hours to charge the battery fully. When charging has completed, red LED
will be off.
Note: Choosing travel charger or USB cable depends on different countries or
areas and actual demands.
3
Remarks:
• The battery is recycled.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, re or the like.
How to use
Turning on/o the headset
Function Operation LED Indicator Indication tone
Turning on Press and hold MFB Blue LED is A long "DI"
Turning off Press and hold MFB Red LED is Along
Remark: In order to save power, the headset Will turn off automatIcally If no
devices can be connected after 5 minutes.
Pairing the headset with Bluetooth devices
How to enter pairing mode
Function Operation LED Indication Indicator tone
Entering Ensure the headset is LED ashes Two short
pairing turned off, and then red and blue "DU" tones
mode press and hoId MFB alternately
button for 3~5 on for 1 tone
seconds until blue second
LED ashes
button for 3~5 on for 1 "DI" tone
seconds until red LED second
ashes
button for 5~7
seconds until LED
ashes red and blue
alternately
4
Remark: Paring mode Will last 2 minutes. If the headset still can’t pair with any
Bluetooth devices after 2 minutes, it will return to standby mode automatically in order to save power.
Pairing the headset with a Bluetooth cell phone
Prior to using the headset for the rst time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different
models of cell phones. Please refer to your cell phone user's manual for further information. The general pairing procedures are as follows:
1 Place the headset and Bluetooth cell phone where they are easily viewable
by no more than I meter apart;
2 Enter the headset's pairing mode (please refer to "How to enter pairing
mode);
3 Activate your cell phone's Bluetooth function and set your cell phone to
search for Bluetooth devices. After the search is completed, select "QB
Sport" from the Bluetooth device list;
4 According to the indication, enter password or PIN No:"0000" and press
"Yes" or "conrm";
5 After successful pairing, select "QB Sport" in the Bluetooth device list, and
press "connect".
6 After successful connecting, blue LED ashes twice or three times quickly
every 4 seconds.
Remarks:
• If pairing is failed, please turn off the headset rst and then re-pair according to steps 1-6 mentioned above.
• After pairing is successful, the headset and the cell phone will remember
each other, they will no need to re-pair next time.
• If you want to pair the headset with other devices, please pair it with the
new device according to steps 1-6 mentioned above.
• If the Bluetooth version of your cell phone is V2.1 and above, it will no need
to enter pairing password when the headset pairs with your cell phone,
they will match automatically.
5
Pairing the headset with a Bluetooth transmitter
You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTTO I 0 (Bluetooth transmitter for iPod, not included) for
example. The pairing procedures are as follows:
1 Place the headset and the Bluetooth transmitter where they are easily
viewable by no more than 1 meter apart;
2 Enter the headset's pairing mode (Please refer to "How to enter pairing
mode);
3 Turn on the Bluetooth transmitter. It will search for Bluetooth devices auto-
matically and send a pairing request;
4 When the headset requests to enter a PIN No., the transmitter will response
"0000" automatically;
5 After successful pairing and connecting, blue LED of the headset will ash
twice quickly every 5 seconds.
Remarks:
• The pairing password of the headset is "0000". So,
the headset can only pair with a Bluetooth transmitter whose pairing password is "0000".
• If pairing still fails after several tries, please refer to the Bluetooth transmitter's user's manual for further information.
Multi-pairing
The headset can connect with two devices at most. One is a Bluetooth cell
phone supporting HFP prole, the other one is a Bluetooth music device supporting A2DP prole. If you want to nish the multi-pairing, please refer to the
following steps:
1 Firstly, pair the headset with a Bluetooth transmitter (refer to "pairing the
headset with a Bluetooth transmitter”);
2 Turn off the Bluetooth transmitter;
3 Pair and connect the headset with a Bluetooth cell phone (refer to "pairing
the headset with a Bluetooth cell phone").
6
3 Turn on the Bluetooth transmitter, it will connect to the headset automati-
cally.
Remarks:
• After successful multi-pairing, the paired devices will remember each
other. Unless pairing information is deleted because of new pairing, they
will no need to pair next time. If the pairing information is deleted, please
make the cell phone and the headset set up hands free connection rst
and then turn on the Bluetooth transmitter, multi-connecting can be performed.
• For the cell phone supporting the HSP and A2DP at the same time. It may
set up HSP and A2DP connection with the headset simultaneously. At this
time, the Bluetooth transmitter may not connect to the headset.
Re-connecting with a Bluetooth device
Automatic connecting
Every time the headset is turned on, it will connect to last connected device
automatically.
Manual connecting to last connected HFP device
When the headset is in standby mode and doesn't connect to any HFP devices, short press MFB button twice, it will connect to last connected HFP device automatically.
Manual connecting to last connected HFP device
When the headset is in standby mode and doesn't connect to any A2DP devices, short press 7 button once, it will connect to last connected A2DP device automatically.
Remarks:
• Before connecting to a Bluetooth device, please turn on the Bluetooth device's Bluetooth function.
7
• On some Bluetooth devices, take some Nokia cell phones for example, you
have to allow automatic connecting in the cell phone's settings. Please
refer to your cell phone's manual for further information.
Wearing the headset
The headband of the headset is folding and retractable, please adjust according to the actual use. Logo "L" of the headset represents left ear, Logo "R" of
the headset represents right ear.
Please wear the
headset according
to the indication
of the Logo
Making a call with the headset
Function Status of Operation Indication
Voice Standby Press and hold 8 button A short tone
dial mode for 2 seconds until
Redial last Standby Quickly press MFB A short tone
number mode button twice
Volume During a Short or Long press
up call VOL+ button
Volume During a Short or Long press
down call VOL– button
QB Sport tone
hearing indication tone
8
Answer a Incoming Short press MFB button A short tone
call ring
Reject a Incoming Press and hold MFB A short tone
call rIng button for 2 seconds until
End a During a Short press MFB button A long tone
call call
Call During a Press and hold MFB A long tone
transfer call button for 2 seconds until
Microph During a Quickly press MFB 2 falling
one mute call button twice tones
Cancel During a Quickly press MFB 2 rising tones
mute call (Mute) button twice
Remarks:
• Not all cell phones support all functions listed above. Please refer to your
cell phone's user 's manual for further infonnation.
• When the volume is adjusted to max. or min., you will hear a "DI" tone.
• When pressing the answer button on some cell phones, the call will be
transferred to the cell phone. You have to switch the call to the headset
manually then. Please refer to your cell phone'S user 's manual for further
infornation.
hearing indication tone
hearing indication tone
Music playback
After connecting the headset to a Bluetooth cell phone or Bluetooth transmitter supr orting A20P, you can enjoy music with the headset.
Function Status of QB Sport Operation
Volume up Playing music Short or Long press VOL+ button
Volume down Playing music Short or Long press VOL- button
Pause Playing music Short press MFB button
9
Play Pausing Short press MFB button
Previous Playing music Short press 7 button once track
Next track Playing music Short press 8 button once
Remarks:
• When playing music on some cell phones, the music will be transmitted to
the cell phone's speaker instead of the headset. You have to select "transmit the sound via Bluetooth" in the settings menu and then choose "QB
Sport"as speaker device. The music will be transmitted to the headset.
Please refer to your cell phone's user's manual for further information.
• When the volume is adjusted to max. or min., you will hear a "DI" tone.
• If you want to remote control previous/next track, pause/play, it needs
your Bluetooth cell phone or Bluetooth transmitter paird with the headset
to support AVRCP prole, please refer to the user's manual of your cell
phone or Bluetooth transmitter for further information.
LED indicator
When the headset is charging
LED Indicator Status of QB Sport
Red LED is on Charging in progress
Red LED is off Finish charging
When the headset connected to a Bluetooth device
LED indicator Status of QB Sport
LED ashes red and blue Pairing mode
alternately
Blue LED ashes once every 2 Standby mode (not connected
seconds to a Bluetooth device)
Blue LED ashes twice quickly Set up HFP or A2DP
every 4 seconds connection
10
Blue LED ashes three times Set up HFP and A2DP
Quickly every 4 seconds connection
Blue LED ashes twice every 3 Incoming call
seconds
Blue LED ashes once every 4 During a call
seconds
Indication tone
Indication tone Status of QB Sport
Emits 2 tones every 5 seconds During a call (Microphone mute
Emits 3 "Dong" tones every 20 Low power
seconds
Care and maintenance
Read the following recommendations before using the headset Following
these you will be able to enjoy the product for many years.
• Do not expose the headset to liquid, moisture or humidity to avoid the
product's internal circuit being affected.
• Don't use abrasive cleaning solvents to clean the headset
• Do not expose the headset to extremely high or low temperatures as this
will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don't dispose of the headset in a re as it will result in an explosion.
• Don't expose the headset to contact with sharp objects as this will cause
scratches and damage.
• Don't let the headset fall down onto the oor. The internal circuit might get
damaged.
• Don't attempt to disassemble the headset as it may get damaged if you are
not professional.
In case the headset doesn't function properly, send it to the store you bought
it. The staff will help you to solve the problem.
11
FAQs
Why does red LED ash?
The headset is low power, it needs to be recharged.
Why isn't red LED on when charging?
a) Please make sure the charger connects well with the headset;
b) When you didn 't use the headset for a long time, the battery may dry up.
At this time, you have to charge the battery for 30 minutes, and then the
red LED will be on.
How far is the eective range between the headset and Bluetooth cell
phone?
According to the Bluetooth standard, the max. controllable range of Class II
headset is 10 meters. It varies under different environment.
What to do when my cell phone can not search and nd the headset?
The cell phone will not nd the headset if the headset and cell phone are not
under the pairing mode. Make sure the headset is under the pairing mode
and in the effective working range, and then the headset can be paired and
connected.
Why can't hear the voice from the headset?
a) Make sure the headset is turned on;
b) Ensure the volume of the headset is not too low or mute;
c) Make sure the headset connects well with your cell phone;
d) Ensure the distance between the headset and your cell phone is in the nor-
mal working scope.
Why is there no voice when making a call with the headset?
a) Make sure your cell phone is in the strong signal area;
b) Ensure the headset is in the function range.
12
Why can't I remotely control the pause, play, previous track and next
track functions with the headset when playing music?
The function needs the Bluetooth device paired with the headset to support
AVRCP (AudioNideo Remote Control Prole). Please make sure your cell phone
or Bluetooth transmitter supports AVRCP prole.
Specications
Bluetooth specication Bluetooth V2.1+EDR
Bluetooth proles HSP, HFP, A2DP and AVRCP
Operating distance 10 meters, Class II
Working time Music: Up to 5 hours
Standby time Up to 120 hours
Charing input voltage DC +S.0±0.25VA
Charging time Approx. 2 hours
Dimensions 158x148x26mm
Weight Approx. 40g
Notes:
• This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Talk: Up to 6 hours
13
User manual
QB
Bluetooth
Sport
Stereo
Headset
Loading...