Page 1
User Instructions
LPX2
Designed and Developed by
HiTech Equipment Corporation
9672 Via Excelencia
San Diego, California 92126
(619) 566-1892
Operation
The LPX2 reads the users input from either the TAKE or RETURN buttons on
the transmitter. Based o n this user input, the transmitter’s microprocessor outputs a
corresponding packet of data, which is then modulated and radiated via antennae to a
local receiver. The information is then demodulated by a local receiver, which outputs the
communicated infor mation. This information is then transferred to a local database.
Instructions:
When an item is remove d press the TAKE button.
When an item is replaced press the RETURN button.
There are no other functions for the LPX2.
No Setup is necessary
Caution: Any changes or modifications not expressly approved by HiTech Equipment
Corporation could void the user’s authority to operate the LPX2.
Loading...