Python 4810P, 4610P Owner's Manual

Vista, CA 92081

www.pythoncarsecurity.com

Directed is committed to delivering world class quality products and services that excite and delight our customers.

OWNER’S GUIDE

The company behind Python® Auto Security

Systems is Directed.

Since its inception, Directed has had one purpose, to

provide consumers with the finest vehicle security and

accessories available. The recipient of nearly 100 pat-

ents and Innovations Awards in the field of advanced

electronic technology.

Quality Directed products are sold and serviced

throughout North America and around the world.

Call (800) 876-0800 for more information about our

products and ser vic es.

SECURITY FOR THE BEST

QRG4810PML 2014 07

MODEL

4810P 4610P

Congratulations

Congratulations on the purchase of your state-of-the-art remote start and keyless entry system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. (U.S. only)

Additional Guide Information

Only basic commands, features and essential information are covered in this compact guide. Your product has many advanced features which are not discussed here, please consult the expanded online version for these on the website listed on the back cover. Most sections in this guide also contain additional information which can be found in the expanded online version.

Important information

Government Regulations and Safety information

Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system.

Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose.

Your Warranty

Your system comes with a warranty. The warranty terms are detailed at the end of this guide. Make sure that you receive the proof of purchase from your dealer, indicating the product was installed by an authorized Directed dealer.

Replacement remote controls

Please see your authorized dealer or visit us at www.directedstore. com to order additional remote controls. Remote control part numbers

are found on the back of the device.

2-way communication

Throughout this guide, there are references to 2-way communication and/or conﬁrmation of commands via the 2-way remote control. Please note that your system may not be equipped with a 2-way remote control so such feedback will not apply. For example, under “Lock” in the “Basic Commands (Direct Access)” section, the guide

states: “..... Lock LED turns on with 1 beep.” Such references only

apply to systems with a 2-way remote control. If you would like to upgrade to a 2-way remote control, please consult your authorized dealer. Additional parts and labor may apply.

Contents

Remote Control Information .................................................................................. 2

Control Center .................................................................................................... 2

Using your System ............................................................................................... 3

Commanding the system ....................................................................... 3

Performing Commands ......................................................................... 3

Remote Control Command table ............................................................ 4

Fault Condition alerts ........................................................................... 4

Basic Commands (Direct Access) .......................................................................... 5

Lock ................................................................................................... 5

Unlock ................................................................................................ 5

Remote Start ........................................................................................ 5

AUX/Trunk .......................................................................................... 6

Remote Control Configuration .............................................................................. 6

Battery Information .............................................................................................. 7

Battery Disposal .................................................................................. 7

Patent Information ............................................................................................... 7

Government Regulations ...................................................................................... 8

Warning! Safety First ......................................................................................... 10

Installation ........................................................................................ 10

Remote Start Capable ........................................................................ 10

Manual Transmission Vehicles ............................................................. 10

Interference ....................................................................................... 12

Upgrades ......................................................................................... 12

Water/Heat Resistance ...................................................................... 12

Limited lifetime consumer warranty ..................................................................... 13

Remote Control Information

Feature Description

Internal Antenna Used for transmitting and receiving*information Command buttons (4)

AUX

Used to perform locking, unlocking, auxiliary channel and remote start commands

Function button

A U X

Used to access function levels for commands, configuration menus for programming, Car Selection, and to request reports.

Confirmation LED’s ** Each button has an associated LED next to it that is active

during related operations. These LED’s are labeled respectively as: Lock LED, Unlock LED, Remote Start LED, and Aux LED

* 2-way communication is only applicable to the Responder LE

remote control.

** Only applicable to the Responder LE remote control.

Control Center

The Control Center, typically located on the upper part of the front windshield. It consists of:

• The In-vehicle system antenna.

• The Status LED, as a visual indicator of the system’s status.

• The Control button, for placing the system into Valet Mode* and to perform the Emergency Override operation.

* See online guide.

Using your System

Commanding the system

Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used keyless entry and remote start features while Advanced commands control more specialized features.

Conﬁrmations for Basic or Advanced commands are indicated by horn honks* and parking light ﬂashes. A description of each feature conﬁrmation is found in the following Basic command and Advanced command sections.

Performing Commands

Perform Basic commands by pressing a Command button. Perform Advanced Commands by ﬁrst accessing Levels 1-4 using the

AUX

button and then by pressing a Command button while within a

level.

Advanced command example: Silent Lock

1. Press the

AUX

button once to access Function Level 1.

2. Press the

button to perform the Silent Lock command.

3. The system will lock the doors and ﬂash the parking lights, without horn honks.*

* The optional Horn Honk feature must be connected.

Remote Control Command table

Basic

Commands

Advanced Commands

Button

Level

Direct Access

A U X

x 1

A U X

x 2

A U X

x 3

A U X

x 4

Lock Silent Lock

Unlock Silent Unlock Remote Valet Car Finder

Remote Start Reset Runtime Timer Start Smart Start Defogger

AUX

Aux/Trunk* AUX 1 AUX 2 AUX 3 AUX 4

A U X

Advance Level, Change Car (3 sec), Enter programming (8 sec)

Temperature Check* (2-way only)

Lock Status (2-way only)

Runtime Remaining (2-way only)

*This is an optional feature. See your authorized Directed dealer for details.

Fault Condition alerts

If, when performing a command, a condition exists that does not allow activation of the remote start feature* a fault tone plays to alert of the fault condition.

* See online guide.

Basic Commands (Direct Access)

No conﬁrmation LED’s on.

Lock

Press and release

, Doors lock. The horn honks once, and the parking lights ﬂash. Lock LED turns on with 1 beep.

To Lock and Panic

Press and hold

To lock the system, then activate Panic. For Panic to be effective,the optional horn honk feature must be connected. Press the

button to stop Panic output.

Unlock

Press and release

. The doors unlock. The horn honks and the parking lights ﬂash. Unlock LED turns on and remote beeps twice.

Remote Start*

Press and release

AUX

Activates (or if On, deactivates) the remote starter. The engine turns On, or the engine turns Off accordingly. The parking lights ﬂash. Remote Start LED turns on, and plays tones. If a Remote start conﬁguration issue prevents the engine from starting, the parking lights ﬂash a Remote Start fault report to identify the fault.

AUX/Trunk

Press and hold AUX.

The Aux LED turns on and tones play to conﬁrm. The Trunk opens (if connected) when this button is pressed for 2 seconds.

This is an optional feature. See your authorized Directed dealer for details.

* See online guide.

Remote Control Conﬁguration

The Responder LE and 1-way companion remote controls have operations that can be conﬁgured to a user’s personal preferences*.

* See this section in online guide.

Battery Information

The Responder LE remote is powered by 2 batteries (PB CR-2016) and the 1-way companion remote is powered by 1 battery (CR-2032) that can be purchased at most retailers. When the battery begins to weaken, the operating range will be reduced.

Battery Disposal

Directed cares about the environment. If you need to dispose of the battery, please do so in accordance with your municipal requirements for battery disposal.

Patent Information

This product is covered by one or more of the following United States patents:

Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783

Vehicle Security Patents: 5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591; 5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484

Other patents pending.

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

Remote Controls

To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand operated conﬁgurations only. The device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device is designed to be used in a person’s hands and its operating conﬁgurations do not support normal transmissions while it is carried in pockets or holsters next to a person’s body.

Control Center

To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance.

This device complies with the Industry Canada Radio Standards Speciﬁcation RSS 210. Its use is authorized only on a no-interference, no-protection basis; in other words, this device must not be used if it is determined that it causes harmful interference to services authorized by IC. In addition, the user of this device must accept any radio interference that may be received, even if this interference could affect the operation of the device.

WARNING! Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.

Warning! Safety First

Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. If you have any questions, ask your retailer or contact Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command signal from the remote control transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage). When parking in an enclosed or partially enclosed area or when having the vehicle serviced, the remote start system must be disabled using the installed menu wheel. It is the user’s sole responsibility to properly handle and keep out of reach from children all remote control transmitters to assure that the system does not unintentionally remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user.

Manual Transmission Vehicles

Remote starters on manual transmission vehicles operate differently than those with automatic transmission because you must leave your car in neutral.

You must read this Owner’s Guide to familiarize yourself with the proper procedures regarding manual transmission remote starters. If you have any questions, ask your authorized Directed dealer or contact Directed at 1-800-753-0600.

Before remote starting a manual transmission vehicle, be sure to:

• Leave the vehicle in neutral and be sure no one is standing in front or

behind the vehicle.

• Only remote start on a ﬂat surface

• Have the parking brake fully engaged

WARNING! It is the responsibility of the owner to ensure the parking/emergency brake properly functions. Failure to do so can result in personal injury or property damage. We recommend the owner have the parking / emergency brake system inspected and adjusted by a qualiﬁed automotive shop biannually.

Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or death. (1) Never remotely start the vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user must also have the neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear. This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in the product installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the authorized Directed dealer to ﬁx the problem.

After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear. All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected vehicles only. Use of this product in a standard transmission vehicle must be in strict accordance with this guide.

This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such vehicles may pose certain risk.

Interference

All radio devices are subject to interference which could affect proper performance.

Upgrades

Any upgrades to this product must be performed by an authorized Directed dealer. Do not attempt to perform any unauthorized modiﬁcations to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please take care to keep this product dry and away from heat sources. Any damage from water or heat will void the warranty.

+ 34 hidden pages

Python 4810P, 4610P Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual