Congratulations on the purchase of your state-of-the-art remote start
and keyless entry system. Reading this Owner’s Guide prior to using
your system will help maximize the use of your system and its many
features. For more information please visit the below website:
http://www.pythoncarsecurity.com – For general and additional
guide information.
For any additional questions please contact your authorized Directed
dealer or contact Directed at 1-800-753-0600. (U.S. only)
What you get
Welcome to the best generation of keyless entry with remote start.
Your system contains everything you need.
s One Responder LE 2-way SuperCode remote control
s 1-way companion remote
s Owner’s guide
s Warranty card
AUX
AUX
Important information
Government Regulations and Safety information
Read the Government Regulations and Warning! Safety
First sections of this manual prior to operating this system.
Warning! Failure to heed this information can result in
death, personal injury or property damage and may also
result in the illegal use of the system beyond its intended
purpose.
Your Warranty
Your system comes with a warranty. Please make sure you receive the
warranty registration card and proof of purchase from your dealer
indicating the product was installed by an authorized Directed dealer.
You can validate it online at www.prodregister.com/directed or com-
plete and return the warranty registration card.
Replacement remote controls
Your system comes with one Responder LE remote control (P/N
7251P) and a 1-way companion remote (P/N 7152P). If additional
remotes are desired, please see your authorized dealer or visit us at
www.directedstore.com to order.
Contents
Getting Started ....................................................................................................3
Keys to using this manual ...................................................................... 3
Remote Control Information .................................................................................. 4
Control Center ..................................................................................... 5
Using your System ............................................................................................... 6
Commanding the system ....................................................................... 6
Internal AntennaUsed for transmitting and receiving*information
Command buttons (4)Used to perform locking, unlocking, auxiliary channel and
remote start commands
Function buttonUsed to access function levels for commands, configura-
tion menus for programming, Car Selection, and to request
reports.
Ghost LED’s**Each button has an associated LED next to it that are active
during related operations. These LED’s are labeled respectively as:
Lock LED, Unlock LED, Remote Start LED, Aux LED, and
LED
Command
Buttons
Function
Button
*2-way communication is only applicable to the Responder LE
remote control
** Term denotes that these LED’s are only visible when On (Ghost
LED’s are only applicable to the Responder LE remote control).
The Control Center, typically located on the upper part of the front
windshield. It consists of:
s The In-vehicle system antenna.
s The Status LED, as a visual indicator of the system’s status.
s The Control button, for placing the system into Valet Mode* and
Commands, Basic or Advanced, are used to activate system features
and are performed by pressing one of the Command buttons. Basic
commands control the most often used keyless entry and remote start
features while Advanced commands control more specialized features.
Confirmations for Basic or Advanced commands are indicated
by horn honks* and parking light flashes. A description of each feature confirmation is found in the following Basic command and Advanced command sections.
Performing Commands
Perform Basic commands by pressing a Command button.
Perform Advanced Commands by first accessing Levels 1-4 using the
button and then by pressing a Command button while within a
level.
Advanced command example: Silent Lock
1. Press the
mit LED single flashes for 3 seconds.
2. Press the
perform the Silent Lock command.
3. The system will lock the doors and flash the parking lights,
without horn honks.*
button once to access Function Level 1, The trans-
button while the transmit LED is still flashing to
* The optional Horn Honk feature must be connected.
Press and release ,
Doors lock (if connected). The horn honks once, and the parking lights
flsh one-time. Lock LED turns on with 1 beep.
To Lock and Panic
Press and hold
To lock the system, then activate Panic. For Panic to work,the
optional horn honk feature must be connected. Press the
button to stop Panic output.
Unlock
Press and release .
The doors unlock (if connected).
The horn honks twice and the parking lights flash. Unlock LED turns on
and remote beeps twice.
Remote Start*
Press and release
Activates (or if On, deactivates) the remote starter. The engine turns
On, or the engine turns Off accordingly. The parking lighs flash.
Remote Start LED turns on, and plays tones.
If a Remote start configuration issue prevents the engine from starting,
the parking lights flash a Remote Start fault report to identify the fault.