Page 1
Magnifiers
and
Measuring
Magnifiers
MAG 6 and MAG 7 Magnifiers
Typical Applications
Used in: Used for:
w Industrial and Commercial Photography w The examination of tools, cutters and dies
w Cartography w The examination of printed circuit boards and artworks
w Calligraphy w The measurement of print lines and characters
w Navigation w Crack and fault evaluation in concrete, metals and
w Building Industry other materials
w Banking w Optical character recognition
w Production Control w Identification of thread pitch and diameter
w Engineering
w Forensic Science
w Education and Research
w Textile Manufacture
w Philately
MAG 6 and MAG 7 Magnifiers offer a superior solution to the optical inspection and measurement requirements
across a wide range of manufacturing industries. From simple magnifiers to magnifiers with graticules/reticles,
the Pyser-SGI Inspecta range offers both standard and custom made products.
Pyser-SGI has been manufacturing optics for over 75 years, and has built up a strong reputation for offering high
quality, robust components and systems.
Page 2
A range of hand-held magnifiers for measurement and inspection. Their robust construction and flat field, all
glass optics, make them ideal aids for those concerned with inspection, quality control, drafting, photography,
map making, electronics etc. The clear base allows ample light to fall on the specimen surface being measured, and the eye lens can be focussed.
Interchangeable graticules (reticles) can be fitted in the base ring to suit the measurement purpose (see the
back page of this leaflet). The MAG 6 Measuring Magnifier is supplied with a robust leatherette case.
Magnification: x8
Height: 65mm
Field of View: 25mm
Overall Diameter: 40mm
MAG 6 Measuring Magnifier - x8
Multi element glass lens
Rubber focussing grip
Metal body stoved white
Clear acrylic sleeve
Graticule/reticle retaining ring
Ordering Information
Cat. Ref: MAG6
Order Code: 50E02000
Ordering Information
Cat. Ref: MAG6A
Order Code: 50E02002
This magnifier is similar to the MAG 6, but has an extended acrylic-base instead of the graticule retaining ring.
This allows more light to fall on the surface of the specimen. However, unlike the MAG 6 there is no facility for a
graticule to be fitted. The MAG 6A Inspection Magnifier is supplied with a robust leatherette case.
MAG 6A Inspection Magnifier - x8
Multi element glass lens
Rubber focussing grip
Metal body stoved white
Clear acrylic sleeve
Magnification: x8
Height: 65mm
Field of View: 25mm
Overall Diameter: 40mm
Page 3
Ordering Information
Cat. Ref: MAG7
Order Code: 50E02014
Used when the field of view covered is more important than the power of magnification. The field of view is
more than 3 times that covered by MAG 6 whereas magnification is only reduced by half. The instrument is suitable for use for all the same purposes as MAG 6 and has the facility for a graticule (reticle) to be fitted (see the
back page of this leaflet). The MAG 7 Measuring Magnifier is supplied with a robust leatherette case.
Magnification: x4
Height: 60mm
Field of View: 85mm
Overall Diameter: 73mm
MAG 7 Measuring Magnifier - x4
Ordering Information
Cat. Ref: MAG 7A
Order Code: 50E02015
The acrylic tube is extended to the base of the magnifier to allow more light to fall on the surface of the specimen. However, there is no facility for a graticule to be fitted. The MAG 7A Measuring Magnifier is also supplied
with a robust leatherette case.
MAG 7A Inspection Magnifier - x4
Multi element glass lens
Rubber focussing grip
Metal body stoved white
Clear acrylic sleeve
Graticule/reticle retaining ring
Multi element glass lens
Rubber focussing grip
Metal body stoved white
Clear acrylic sleeve
Magnification: x4
Height: 60mm
Field of View: 85mm
Overall Diameter: 73mm
Page 4
Pyser-SGI Limited reserves the right to amend these specifications.
Visit our website on www.pyser-sgi.com for further information on the
complete range of products available from Pyser-SGI Limited.
Graticules/Reticles for MAG 6 Measuring Magnifier
Graticules/Reticles for MAG 7 Measuring Magnifier
Standard graticules
are on glass discs
with black metalised
opaque lines best
suited for light
backgrounds.
For dark backgrounds
red and white line
graticules are also
available.
Standard graticules are on glass
discs with black metalised
opaque lines best suited for
light backgrounds.
For dark backgrounds red and
white line graticules are also
available.
Cat. Ref: M7T100
Order Code: 50B02016 - Std
50B02016W - White
Cat. Ref: M7T109
Order Code: 50B02018
Cat. Ref: M7T108
Order Code: 50B02017
Cat. Ref: M7T150
Order Code: 50B02019
Horizontal Scale
25mm/0.1mm
Crossed Scale
20mm/0.1mm
Crossed Scale
1inch/0.005ins
Combination
Scale and
Protractor
Inch/Metric
Scale
25mm/0.1mm
1”/0.005”
Concentric
Circles
2-24mm dia
Centre Zero
Centre
24mm in 0.1mm
Multipurpose OCR-B
Cat. Ref: M6T1
Order Code: 50B02003 - Std
50B02003R - Red
50B02003W - White
Cat. Ref: M6T3
Order Code: 50B02005 - Std
50B02005R - Red
50B02005W - White
Cat. Ref: M6T4
Order Code: 50B02006 - Std
50B02006R - Red
50B02006W - White
Cat. Ref: M6T8
Order Code: 50B02007 - Std
50B02007R - Red
50B02007W - White
Cat. Ref: M6T20
Order Code: 50B02008 - Std
50B02008R - Red
50B02008W - White
Cat. Ref: M6T50
Order Code: 50B02009 - Std
50B02009R - Red
50B02009W - White
Cat. Ref: M6T10
Order Code: 50B02004 - Std
50B02004R - Red
50B02004W - White
Cat. Ref: M6T40
Order Code: 50B02050 - Std
50B02050R - Red
50B02050W - White
Cat. Ref: M6T85
Order Code: 50B02055 - Std
Horizontal Scale
50mm/0.1mm
Inch/Metric
Scale
50mm/
0.1mm
2”/0.005”
Concentric
Circles
2-50mm
dia
Multipurpose
Other Products in the Inspecta
Range:
w
Portable Microscopes
w
Microscope Components
w
Measuring Scales
w
Video Inspection
w
Depth Scopes
w
Thru Hole Scopes
w
Calibration Products
w
Microscope Systems
w
Co-ordinate Measurement
w
Measuring Microscopes
N.B. Artist’s impression
of Graticules/Reticles
for guidance only
Loading...