Pyronix XDH10TTAM Installation Manual

START

3k
15k
12k
8k2
6k8
5k6
4k7
2k2
1k

10k
5k6
4k7
3k9
2k7
2k2
1k5
1k

10k
6k8
5k6
4k7
3k9
2k7
2k2
1k5
1k
820R

A A T T
EOL INPUT 1 COM

+12V 0V

EOL EOL EOL R1 LED ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

3k
15k
12k
8k2
6k8
5k6
4k7
2k2
1k

10k
5k6
4k7
3k9
2k7
2k2
1k5
1k

10k
6k8
5k6
4k7
3k9
2k7
2k2
1k5
1k
820R

A A T T
EOL INPUT 1 COM

+12V 0V

EOL EOL EOL R1 LED ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

3k
15k
12k
8k2
6k8
5k6
4k7
2k2
1k

10k
5k6
4k7
3k9
2k7
2k2
1k5
1k

10k
6k8
5k6
4k7
3k9
2k7
2k2
1k5
1k
820R

A A T T
EOL INPUT 1 COM

+12V 0V

EOL EOL EOL R1 LED ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

3k
15k
12k
8k2
6k8
5k6
4k7
2k2
1k

10k
5k6
4k7
3k9
2k7
2k2
1k5
1k

10k
6k8
5k6
4k7
3k9
2k7
2k2
1k5
1k
820R

A A T T
EOL INPUT 1 COM

+12V 0V

EOL EOL EOL R1 LED ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

3k
15k
12k
8k2
6k8
5k6
4k7
2k2
1k

10k
5k6
4k7
3k9
2k7
2k2
1k5
1k

10k
6k8
5k6
4k7
3k9
2k7
2k2
1k5
1k
820R

A A T T
EOL INPUT 1 COM

+12V 0V

EOL EOL EOL R1 LED ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

3k
15k
12k
8k2
6k8
5k6
4k7
2k2
1k

10k
5k6
4k7
3k9
2k7
2k2
1k5
1k

10k
6k8
5k6
4k7
3k9
2k7
2k2
1k5
1k
820R

+12V 0V

EOL EOL EOL R1 LED ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

No resistors are required for

the Alarm N/O relay

10m Pet Immune External Detector

Environmental Class IV

ENGLISH

References

Technical Specification

Warranty

Product Warning Information

Optional Accessories

Frequency

Anti-Masking: The XDH10TT-AM uses the patented Anti-Masking
technology to detect when one or both PIR detectors as well as the
Microwave module are Masked.
The detector is able to detect aluminium foil, spray and any object position
on or in front of the detector with the purpose of obstructing the field of
view of the PIR or MW sensors.
The masking area is adjustable between 0 to 1M.

If the masking area is entered the Blue LED starts flashing to show that
the area has been compromised. If the obstacle is removed after 30 seconds
and the BLUE alarm LED have activated the detector will reset to normal. If
the obstacle still remains after 1 minute, the MASK and ALARM relay will open
and the Green and Orange LEDs will be permanently activated. To reset the
detector, the obstacle must be removed and a walk test should be done.
The Anti-Masking can be disabled when the panel is armed. For this the RI
terminal has to be connected to an output of the panel which is POSITIVE
when ARMED. To enable this feature also, switches 2 and 4 must be OFF.

Blocking: This feature allows the detection of obstruction located at 10M
or less and is used when the panel is disarmed. When the blocking feature is
active the Alarm relay will open and the Green and Orange LEDs will be
activated. To reset the blocking XD should be walk tested so that both PIRs
and MW sensors are activated.
To enable the feature, switches 3 and 4 must be OFF and the RI input
should be connected to an output on the control panel which gives a
NEGATIVE when DISARMED and a POSITIVE when ARMED.

Casing: 3mm polycarbonate, 0.4mm HDPE in Lens Area
Lenses: 2 x Lens 5 (UV Compensated)
Tri-Detection Method: 2 low noise dual element passive infrared sensors

and a microwave doppler unit

Tri-Masking Adjustable: from 0M to 1M. Covers all 3 technologies.
Sensitivity Selectable: AUTO or HIGH
Temperature Compensation: Digital
Detection Speed: 0.25 - 2.5m/s
Operating Voltage: 9-16VDC, 13.8VDC typically
Current Consumption: 24mA @ 13.8VDC quiescent
Relay Output: 3 x SELV limits, 60VDC 50mA (42.4VAC peak)
Mounting Height & Range: 1.8M - 2.4M = 10M (Lens 5)
Pet Immunity: 10kg
Tamper Switch: 12VDC 50mA both front and rear
Storage Temperature: -40°C to +80°C (+40°F to 176°F)
Operating Temperature: -30°C to +70°C (+22°F to 158°F)
Dimensions & Weight: 188 x 77 x 84mm, 0.3kg

Emissions EN55022 Class 2.
IP Rating: IP55

This product is sold subject to our standard warranty conditions and is
warranted against defects in workmanship for a period of five years
(excluding lens). In the interest of continuing improvement of quality,
customer care and design, Pyronix Ltd reserves the right to amend
specifications, without prior notice.

For electrical products sold within the European Community. At the end of
the electrical products life, it should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local Authority
or retailer for recycling advice in your country.

Adjustable Lens Masks
XD-FIXEDBRACKET + Fixed Lens Mask
XD-WALLBRACKET + XD-45D-ADAPTER

This product operates in a European non-harmonized frequency band.
Hereby, Pyronix, declares that this XDH10TT-AM is in compliance with the
essential requirements and other relevant provisions of Directive
1999/5/EC. The declaration of conformity may be consulted at
www.pyronix.com/product-compliance.php

9.9GHz:

AT BE CH CY CZ DK FI
FR GR HR HU IE IS IT
LT MT NL PL SI TR

10.525GHz

BE CH CY DK HU IE IS
IT MT NL NO SE SI

10.587GHz

GB

3

3EOL

W = XD-WALLBRACKET

F = XD-FIXEDBRACKET

Max: 1M

1M

MAX

2

DEOL

N/C

2

DEOL

N/C

>1m

≤1m

MASK/ALARM LINK

30% Mask

30%

OFF

OFF

PCX

ATE INPUTS

 0845 6434 999 (UK). [phone]  [e-mail]  www.pyronix.com Pyronix Limited, Pyronix House, Braithwell Way, Hellaby, Rotherham, S66 8QY, UK

A A T T
EOL INPUT 1 COM

PGM
NO C NC

+12V 0V

0V

EOL EOL EOL R1 LED

ALARM N/O

TAMPER ALARM N/C MASK/FAULT

PCX 46

A A T T
EOL INPUT 1 COM

PGM
NO C NC

+12V 0V

0V

EOL EOL EOL R1 LED

TAMPER ALARM N/C MASK/FAULT ALARM N/O

PCX 46

0.25 - 2.5m/s

0.25 - 2.5m/s

60Hz

AC 110V

AC 230V

50Hz

LED

LED

PROGRAM OUTPUTS?

PGM [0000]
Not Used

Endstation PGMs?

PGM [0022]
Final Arm Any

IMPOSTA USCITE?

Usc. PGM [0000]
Non Usato

Centrale?

Usc. PGM [0022]
Ogni Area Inst.

PROGRAM OUTPUTS?

PGM [0000]
Not Used

Endstation PGMs?

PGM [0022]
Final Arm Any

IMPOSTA USCITE?

Usc. PGM [0000]
Non Usato

Centrale?

Usc. PGM [0022]
Ogni Area Inst.

LED abilitati

Buzzer ON

ALARM e MASK aperti

in mascheramento

Sensibilità auto

RI (controllo

remoto) disabilitato

Blocking disabilitato

Anti-Mascheramento

abilitato

50Hz

LED da abilitare
su controllo remoto

Buzzer Off

Solo MASK aperto
in mascheramento

Sensibilità alta

RI (controllo
remoto) abilitato

Blocking da abilitare su
controllo remoto
Anti-Mascheramento da
abilitare su controllo remoto

60Hz

 0845 6434 999 (UK). [phone]  [e-mail]  www.pyronix.com Pyronix Limited, Pyronix House, Braithwell Way, Hellaby, Rotherham, S66 8QY, UK