Pyramid GA110 User Manual
Owner's Manual
www.pyramidcaraudio.com
GA110
Guitar Amplifier
www.pyramidcaraudio.com
4
1
Troubleshooting
Distorted Sound:
1 2
3
4
5 7
6
1) Power Switch: Switches amplifier on/off.
2) Power LED: Illuminates when power is switched on.
3) Input Jack: Connect your instrument to this jack.
4) Volume: This sets the volume gain level.
5) Bass: This control adjusts the low frequency level.
6) Treble: This control adjusts the high frequency level.
7) Phones Jack: This is your headphone connection.
Inserting the headphones disables the internal speaker
(great for practicing).
1 2
Check if the amplifier is overdriven. If it is, you will
have to turn the level down.
Check signal source.
Signal sounds discolored:
Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.
No Sound:
Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Intermittent Output:
Check connections.
Try a different cable.
Specifications
1) Voltage Selector: AC 110/220 Volt Selectable Switch.
2) Power Cord: Connect cord to an AC outlet.
2
Model Driver
5.25" High
GA110
Definition
Speaker
Peak Dimensions
RMS
20 W 150W
W=8 2/3"
H=9 3/8"
D=4 3/4
3
Weight
6.48 lbs
Loading...