Pyle view PYLE PLDBT30U Owner's Manual
www.pyleaudio.com
PLDBT30U
3'' TFT Touch Screen DVD/ VCD/ CD/ MP3/ CD-R/ USB/ AM/ FM/ BlueTooth
1
PLAY/PAUSE
Eject
Source/Power
Mute
Volume
Select charter/Foward /Backward
Repeat
Release
Display position adjustment
Band
Band tuner
APS/ST
Safety Precautions......................................................2
Electric Connection ............................................... .....3
Installation.................................................................4
General Features........................................................5
System setting.....................................................9
Radio Operation..................................................12
Remote Control....................................................13
Accessories........................................................16
Specifications.....................................................17
Trouble Shooting.................................................18
Video
Audio
System
Contents
Reception collection
Speaker collection
Install the unit
Remove the unit
Loading and Replacing the battery
Basic operation
USB/SD operation......................................................8
USB/SD PLAYER
Bluetooth............................................................10
2
Safety precautions
CAUTION
Be sure the unit is connected to a 12V
DC power with a Negative Ground.
Do not install the unit in places where
it is exposed to direct sunlight, high heat
or humidity, water splash or dust.
To change fuse, please use the same
one in specification and capacity.
When changing fuse, please do it
after pulling down power wires to avoid
short circuit.
If the unit does not seem to be working
properly, please press the reset buttonto
resume the function.
Do not watch videos when driving.
To prevent electric shock, etc.please do
not let
If you smell or see smoke, turn off the
power immediately and consult the place
of purchase.
Be careful not to drop or shock the unit
strongly.
Do not touch the liquid crystal to avoid
hurting yourself. If your clothesare stained
by it, please clean them with soap
immediately.
For your driving safety, please link your
brake detecting wire with low power
level, and keep it controlled by manual
brake switch. wire should be high power
level and the unit can not play DVD or
VCD disc.
the metal goods(silver,coin,tools..)
fall into the installation.
To prevent damage to the machine,
take the following precautions:
WARNING
To prevent injury or fire, please
take the precautions:following
PRECAUTIONS
When driving a car, reduce the
volume to be more aware of the
road traffic.
Avoid getting the speakers and
disc wet from water or dampness
while cleaning the car.
Do not park your car in the direct
sunlight and turn on the unit after it is
cooling down in the car.
Protect your mechanism, and do not
put it close to magnet, screwdriver or
other cohere stuff.
If you do not comply with the above
items, it may cause abnormal running
and system trouble.
Please Note:
Electric Connection
33
White/Black
Gray
To frontleft speaker
To frontright speaker
To rearleft speaker
To rearright speaker
Green
Ignition wire(Red)
Battery wire(Yellow)
Ground wire(Black) (To carchassis)
Fuse(10A)
Battery
Car fusebox
(Main fuse)
Ignition key
sw tchi
White
Gray/Black
Green/Black
Purple
Purple/Black
10
(RED)
(WHITE)
Light wire
Gray
Gray
BROWN
SUBWOOFER
AUXLEFTIN
AUX RIGHTIN
VIDEO IN
(YELLOW)
BACK ACAR VIDEO IN
()YELLOW
Connect controlfor antenna
Detecting wirefor back acar
Brake detectingwire
Remote controlfor amplifier.
FRONT RIGHTRCA OUT
FRONT LEFTRCA OUT
(WHITE)
(RED)
VIDEO OUT
(YELLOW)
Gray
Gray
Brown
Pink
BLUE
Orange
Front.L
Front.R
Rear.L
Rear.R
FM/AM antennainput
4
Before installing the receiver, fit it in the suitable placeof your car.
Then connect the corresponding speakers and electrical connections.
When your system is operated properly,follow the instructions installation
1) Adapter
(not supplied)
2)Bend over the slices
(supplied)
Slices
(supplied)
3) Two keys for releasing
the unit (supplied)
INSTALL THE UNIT
1)Install thebracket
2)Bend oversome slices tosecure the
installation ofbracket inside of dash.
3)To avoidshake of thereceiver, make
sure toinstall the fixationstrap behind
the receiver.
Insert thekeys into thesmall gaps in
the rightand left sidesof the unitat
the sametime. Link thekeys to the
slices andthen pull outthe unit lightly
to removeit from yourcar, andthen
pull outthe connection plugs.
REMOVE THE UNIT
Installation
VOL
SOURCE
APS/
BAND
CLK/
MUTE
ST/RPT
MIC
MENU
IR
General Features
5
VOL
SRC/PWR
/APS
MENU
MUTE
CLK/
ST/RPT
BAND
Loading...