Pyle Sports Speed master, Speed master PPDM3 Instruction Manual
SPEED MASJE7i
ALTIMETER
WITH
Me-me
o
1
Activation·
Before starting
Speed Master Watch
Please remove Ihe protective foil from Ihe display when you use
the speed master watch for the first time and press Ihe
A,
C or
o button (scund signal), unt
il
all displ
ay
segments appear for a
short time.
You
automatically reach setting Ihe units
of
measurement (metric
or
imperial).
• Choose between Ihe METRIC and IMPERIAL
wilh the C button.
Confirm your selection
wiIh
the A button, Ihe
24H
blink.
• Choose between Ihe
12H and 24H display wilh the C button.
Con
fi
rm
your selection wtlh the A button, Ihe seconds blink.
Note:
By
preasing and holding tho C
button
you can usa
tho fast forward function In tho settings.
• Press Ihe C button to reset Ihe seconds to zero. Confirm wilh
Ihe A button, the minutes blink.
• Set the minutes with Ihe C button. Confirm with Ihe A button,
Ihe hour blink.
• Set the hours, year, month, day, weight and height as
described above.
Now press Ihe 0 button, all settings is
saved.
The speed master watch can be worn
like a wristwatch.
- 1 -
FEATURES
SPEED MASTER
•
Digital
motion
sensor
for
speed
detection
•
Current
speed
• Target
speed
zone
training
•
Speed out
zone
alert
• Exercise
time
r
• Di
stance
•
Step
count
•
Average
speed, Maximum
speed
•
Odome
ter
•
Km
or
mile
unit
selectable
TIMETER
•
Altitude
Measuring
Range: -999
to
9999
meter (-2999
to
29999
It)
• MaxlMin.
memory
for
altitude
• T
otal
Altitude
Gain
and
Loss
•
Number
of Hills
count
• Altitude hi
story
and
graphical
display
(up
to 8 hours
record)
•
Meter
or
Feet unit sel
ectab
le
•
Pressure
range
-300
mbar
to
1099
.9
mbar (9.
00
InHg to 31.99l
nHg)
•
Max
.1
Min. memory
for
pressure
•
Weather
forecast
(Sunny,
Sunny
Cloudy,
Cloudy
and
Rainy)
•
Temperahme
in
degree
C or
degree
F
•
mbar
or
inHg
un~
selectable
CHRONOGRAPH
•
Count-down
timer
•
11100
second
99 laps
multi-split
stopwatch
WATCH
•
Dual time
clock
•
Aulo
Calendar
•
CIocl<
alarm
• H
OIJ'Iy chi
me Signa
l
•
Dig~
1
clock with
121
24
format
o E SPECIFI
CAT
IONS
•
EL
bacl<light
•
Water
resistant
housing
-
2-
BATTERY INSTALLATION
Computer Watch
Remove the back cover
of
the watch with a screwdriver, insta
ll
the
3.0V-battery with
the positive(.) pole
fa
cing
up
and
replace the
cover. Remove the battery
and
rei
nse
rt
It
If the
LCD
displays
Irregular
flQ
ures. This will clear
and
restart
the
watch's
microprocessor.
,
3V battery CR2032
-3-
Function Button/Modes/Settings
Function Buttons
of
the Speed Master Watch
LIGHT
Button
(B)
'---
SET
(ST/SP)
Button
(A)
Main Function Mode
MODE
Button
(D)
~
SELECT
(SPLIT)
Button
(C)
The Speed Master watch has five main funcUon modes,
whi
ch
are described further in the next chapters:
- Time Mode
- Stopwatch Mode
-
Altimeter Mode
- Barometer Mode
- Pedometer Mode
The first mode displayed is the time mode. Press the D button
to switch between the different modes. The different modes
are described
In sections TIME MODE, STOPWATCH MODE,
ALTIMETER MODE, BAROMETER MODE and
PEDOMETER MODE.
-4-
TIME MODE
Press the D button until you reach the
time mode, shown
by
"TIME".
By pressing the C button
In
the time
mode, you can choose between the
sub-functions
• Time (TIME)
• Alarm (ALARM) and
• Countdown Timer (TIMER).
Time
Press the C button in
the time mode un
ti
l
TIME Is displayed.
--
~
TInE
(2J-~
(
TInE
~r
08
"
(jjji)
_...AJ::mO
12:0929
\
TU IDI"
In the time mode, the year is displayed
in
the upper segment
of
the dIsplay and the weekday and date in the lower
segment.
Setting
the
Tlme
Keep the A button pressed for about 3 seconds , "SETTING"
appears on the display and 24H blinks. Choose between the
12h and 24h display with the C button. Confirm your selection
WIth
the A button , the seconds blink.
(l5I-~
(jjji)
-~
HOLD
2~H
\
TO
SET
\
-
5-
• Press the C button to reset the seconds to zero.
Confirm your selection with the
A button, the
minutes blink.
Note:
You
can use the fast forward function in the settings by
pressing and holding the
C button.
• Set the minutes with the C button. Confirm with the
A button.
Set the hours, year, month, day, wei
ght
and height as
described above. Now press the
D button, a
ll
settings is
saved.
"""-~
2DDB
(
TU
912"
Second
Time
~-~
WEIGHT
13KG
(
GiJ-~
HEIGHT
ISDCM
Keep the C button pressed for about 3 seconds, the Speed
Master Watch changes to the second time (T2 appears on the
bottom right of the display) .
The setting
of
the second time works as described
in
section
"setting the time". Now press the 0 button, a
ll
settings are
saved.
Keep the C button pressed for about 3 seconds to return to
the normal time
(T1
appears on the bottom right
of
the
display).
-
6-
Note: Start the setting procedure again to correct any wrong
settings.
Alarm
Press the C button in the time mode
until ALARM is displayed .
Setting
the
Alarm
1El-~
ALARM
(
• Keep the A button pressed for about 3 seconds.
"SETTING" appears on the display and minutes blink.
Set the minutes with the C button. Confirm
your
selection
with
the A button. the hours blink.
• Set the hours with the C button.
Confirm with the A button. the month blinks.
• Set the month
with
the C button. Settings
of
1.
2.
3 •...
11.
12 and - are possible. If you choose
-.
the
alarm sounds every month (on the set
day - see the next
section. 'setting the
day')
. Confirm with the A
button. the
day blinks.
• Set the
day
with the C button. Settings
of
1. 2.
3.
30.
31
and - are possibl
e.
If you choose
-.
the alarm
sounds every
day. Confirm with the A button. the
button CH IME (hourly alarm) blinks.
•
You
can now set the hourly alarm to
ON
or
OFF with the
C button.
(!!!J-~
CHH1E
OFF
,
~-~
CHIME
ON
(
-
7-
Bell symbol ~ displayed = hourly alarm on
Bell symbol not displayed
= hou
rt
y alarm
off
Now press the D button, a
ll
settings are saved and the set
alarm is activated automatically.
Rt
"
Gil
_
.AJ:iIIO
22:D5
Ii22
••
Activate/Deactlvate
Alarm
Press the A button when the alarm time is
displayed
Alarm symbol
oJ}
is displayed = alarm on
Alarm symbol not displayed
= alarm off
Switch
off
Alarm
When the alarm rings, you can switch ~ off
by pressing the A,
C
or
D button.
Activate/Deactivate
Snooze
Alarm
When the alarm rings, you have not press
any button.
After
30 seconds, Snooze symbol (
oJ)
)
starts to blink. Snooze alarm repeats for 5
times with an intetval
of
2 minutes each .
After that the alarm will sound at the same
time next
day
.
-8-
Rl
"
Gil
-~
22:D5
,
li22
~.<
Countdown Timer
Press the C button
in
time mode until
TIMER is displayed.
The Speed Master Watch possesses a
countdown timer and a count up timer.
Basic setting 00:
01
:00
(1
minute)
t!!!!)-~
TInER
Keep the A button pressed to set the countdown timer,
'SETTING" appears.
Set the minutes with the C button, confirm with the A button,
select the hours with the C button, confirm with the A button.
r: The timer starts to count down the previously set time again
after zero is reached.
U: The timer starts to count up from zero after zero is
reached.
S: The timer stops after zero is reached.
Confirm the entry with the D button.
For a
ll
three types
of
timers applies:
• Press A button - Timer starts
• Press A button aga in - Timer stops
• Press A button aga in - Timer continuous
• Keep A pressed for about 3 seconds when the
time Is stopped - timer resets to the o
ri
ginally set time.
• When the countdown timer reaches zero, an alarm sounds,
which ends after about 15 seconds,
or
can
be
ended by
pressing the A,
Cor
D button.
-9-
STOPWATCH MODE
Press the 0 button until you reach the
stopwatch
mode
, shown by
"CHRONO".
In stopwatch
mode
you can choose between
the sub functions
•
CHRONO
(stopwatch) and
• DATA RECALL (view data)
Stopwatch
Press the C button in the stopwatch
mode until
CHRONO
Is displayed .
<EJ-~
CHRONO
,
Giil-~
CHRONO
,
Note:
Switching between "stopwatch" and "data recall" only
works If
at
least 1 lap has been recorded.
99 l
ap
times can be saved. If the la p memory
Is full, the displ
ay
MEMORY
FULL appears. "
••
H:"
~
-
10-
MEMORY
FULL
• Press A button to start I stop the stopwatch,
• Press C button to record the lap memory when the
stopwatch Is counting,
• If the stopwatch saves over 99 laps,
ij
wi
ll
display FULL.
•
To
reset the stopwatch, press and hold A button to
zero .
STOPWATCH
mode
Lap memories
Lap
Tomar
lP
a I "
IE]
--A.C:iilO
CC'CC68
'-
00lJ!l.6S
Total counting time
To recall
the
stopwatch
memory
"""
l!:.,
~
MEMORY
FULL
, "0 I
\lSBs
Lap memory
FULL
• Press A button to stop the stopwatch, then press
C button to enter data recall mode.
• Display show the record
of
BEST LAP, the icon "
BEST-lRP
"
will be displayed.
• Press A button to read different lap memories.
• Press C button to exit the memory reca
ll
mode,
-
11
-
Loading...