Pyle Pro Vintage PNGTT1 Operating Instructions Manual

MODEL PNGTT1

Operating Instructions Manual

:

Classic Horn Phonograph/Turntable With

USB-to-PC Connection and Aux-In

1

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE.

,

WARNING:TOREDUCETHE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS
INSIDE REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.

The exclamation point within
an equilateral triangle is in­tended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompany­ing the appliance.

Read these instructions.

1.)
Keep these instructions.

2.)
Heed all warnings.

3.)
Follow all instructions.

4.)
Do not use this apparatus near water.

5.)
Clean only with dry cloth.6.)
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

7.)

Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

8.)

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into you outlet, consult an electrician for
replacement of the obsolete outlet.

9.)

Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and point where they exit from the apparatus.

10.)

Only use attachments / accessories specified by the manufacturer.

11.)
Unplug this apparatus during lightning storms or when unused for long periods of time.12.)
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

13.)

This appliance shall not be exposed to dripping or splashing water and no object filled
with liquids such as vases shall be placed on the apparatus.

14.)

Do not overload wall outlet. Use only power source as indicated.

15.)
Use replacement parts as specified by the manufacturer.

16.)
The product may be mounted to a wall only if recommended by the manufacturer.

17.)
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.

18.)

CAUTION

IMPORTANT SAFETY INSTRUCTIONS

PREPARATION FOR USE

2

Carefully remove the unit from the display carton and remove all packing

material from the unit.

Unwind the AC power plug and extend it to its full length.

Place the unit on a stable, level surface, convenient to an AC outlet, out of

direct sunlight, and away from sources of excess heat, dust, moisture,

humidity, or strong magnetic fields.

Connect the plug to your AC outlet.

UNPACKING AND SET UP

TRANSIT SCREW

Raise the lid to expose the phonograph. The phonograph has been secured

for shipment with a transit screw. Use a coin or screwdriver to

. This will allow the turntable to float .

turn the transit

screw clockwise

,,

,,

3

Remove the opaque white plastic stylus

cover from the phonograph stylus by

sliding it in the direction of the arrow.

Discard the stylus cover.

Remove the twist-tie that was used to
secure the tone arm during shipment.

Release the tone arm lock lever.

Connect the plug to your AC outlet.

STYLUS COVER

TONE ARM LOCK LEVER

POWER SOURCE

This product is designed to operate on 120V 60Hz AC only. Attempting to
operate this system from any other power source may cause damage to the
system, and such damage is not covered by your warranty.

NOTE: You will note that this system is equipped with domestic standard AC
power 2-pin plug. If this plug does not fit into your

existing AC outlet, do not try to defeat this safety
feature by filing the wide blade to make it fit into
your outlet. If this plug will not fit into your outlet,
you probably have an outdated non-polarized AC
outlet. You should have your outlet changed by a
qualified licensed electrician.

IMPORTANT: Raising And Lowering The Lid

To open the lid, raise it as far as it will go until the lid support bracket ‘locks’ in
the open position. To close the lid, lift it upward slightly until the lid support
bracket ‘unlocks’ , and then gently lower the lid.

TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber ‘feet’ to prevent the product from
moving when you operate the controls. These‘feet’are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on
your furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and
leave marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt
pads, available at hardware stores and home improvement centres everywhere,
and apply these pads to the bottom of the rubber ‘feet’ before you place the
product on fine wooden furniture.

AC Outlet

AC Plug

FRONT PANEL

4

1) SPEAKER

2) VOLUME control.

3) Turntable.

4) TOM ARM

4) PC-USB SLOT.

5) PH-AUX SWITCH.

6) AUX IN SOCKET(L/R)

7) LINE OUT SOCKET(L/R)

8) AC POWER LINE PLUG

4

5

6

8

PC-USB

PH-AUX

AUX IN

L

R

LINE OUT

7

L

R

1

4

3

2