Pyle Pro AZR6XA, PZR10XA, PZR30XA, PZR50XA, PZR6XA Owner's Manual

Owner’s Manual

PYLE PRO AMPLIFIERS

warranty registration card

Thank you for purchasing this PYLE

product. To activate your

warranty, please mail this card

within 10 days.

Name

Address

City, State ZIP

Model No. Serial # (if available)

Date of Purchase

Purchased at:

Music Products Store

Catalog Merchandiser

Sound Contractor/Installer Mail Order

Other

Please complete warranty card, detach and return

All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.

Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return
Hotline at [phone] to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.

When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:

R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204

You must also include the following items with your return:

• A copy of your sales receipt or other proof of purchase

• A brief letter, indicating the problem you are experiencing
with the product

• Include in your letter your return address, daytime phone
number and R.A. number

• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.

Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.

Limited Warranty

www.pyleaudio.com

PZR6XA Amplifier
PZR10XA Amplifier

PZR30XA Amplifier
PZR50XA Amplifier

PROTECT

MIN MAX

CLIPSIG

CHANNEL 1

CHANNEL 2

CLIP SIG

MIN MAX

POWER

CAUTION:

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
REPLACE ONL

Y WITH SAME TYPE FUSE.

DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.

CAUTION:

-30 -20 -15 -10 -5 0 +3

-30 -20 -15 -10 -5 0 +3

POWER

CLIPSIG

SIG CLIP

PROTECT

PROTECT

ON

OFF

1 Features and Controls, PZR6XA/10XA and PZR30XA/50XA
2 Installation Guidelines
2 Input Connections
2 Connecting a CD, DVD or tape player or tuner
2 Connecting an equalizer or signal processor
2 Stereo or Mono Inputs
2 Speaker connecitons
3 Bridged Mode Operation
4 Connecting to standard AC power
4 Mounting the amplifier
4 Turning the amplifier on
4 Using the power LED meter
4 Caring for your Pyle Pro Amplifier
4 Using the channel1 and channel2 output level controls
4 About the internal clip circuitry
5 Specifications
5 Limited warranty

TABLE OF CONTENTS

Please read this manual throughly before you attempt to set up and use the amplifier. It contains a
range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you
can expect years of trouble-free service from this product.

PYLE PRO PZR6XA/10XA/30XA/50XA Amplifier

Owner’s Manual – 1

PYLE PRO PZR6XA/10XA/30XA/50XA Amplifier Owner’s Manual

FEATURES AND CONTROLS

Protection Circuit and Indicator

The indicator will be illuminated when
the amplifier is powered on and at turn­on delay status; the indicator will be
turned off after internal outputs are
connected. The indicator will also be
illuminated when the amplifier has
abnormal problems, such as overload
or excessive heat.

FEATURES AND CONTROLS
FRONT PANEL, PZR30XA/50XA

FRONT PANEL, PZR6XA/PZR10XA

Channel 1 and Channel 2
Output Level Controls

Lets you adjust the sound levels
for each channel.

Clip Circuit and Indicator

This special circuitry protects
the amplifier and speaker system
from being damaged by
overdriving power levels.
Indicator lights remind the user
to reduce the volume when
amplifier output is excessive.

Channel 1 and Channel 2 Power LED Display

Indicate the output signal level for each channel.(

PZR6XA without

)

Power On/Off

Protection Circuit and Indicator

The indicator will be illuminated when
the amplifier is powered on and at turn­on delay status; the indicator will be
turned off after internal outputs are
connected. The indicator will also be
illuminated when the amplifier has
abnormal problems, such as overload
or excessive heat.

Channel 1 and Channel 2
Output Level Controls

Lets you adjust the sound levels
for each channel.

Clip Circuit and Indicator

This special circuitry protects the amplifier and speaker system
from being damaged by overdriving power levels. Indicator lights
remind the user to reduce the volume when amplifier output is
excessive.

Power On/Off

Your New Pyle Pro PZR series P.A.
Amplifier gives you the power and
versatility you need in a professional
sound system.
The amplifier's wide frequency
response makes it suitable for
amplifying music or vocal program
material. It can be used for live bands,
office paging systems, public
announcements, or a variety of other
installations.

REAR PANEL, PZR6XA/10XA

Fan Cooling

Cooling system is automatically activated whenever amplifier is turned on.
This forced air cooling system rapidly exhausts interior heat, reducing operating
temperature and aiding performance.

Stereo/Mono Switch

Lets you select conventional
stereo operation with a
stereo input signal or bridged
mono input mode.

Input Jacks

Let you connect a variety of audio
input sources via the balanced
(XLR/6.35mm phone jack
combinations) or unbalanced (RCA)
inputs.

REAR PANEL, PZR30XA/50XA

Fan Cooling

Cooling system is automatically activated
whenever amplifier is turned on. This forced
air cooling system rapidly exhausts interior
heat, reducing operating temperature and
aiding performance.

Stereo/Mono Switch

Lets you select conventional
stereo operation with a stereo
input signal or bridged
mono input mode.

Input Jacks

Let you connect a variety of audio
input sources via the balanced
(XLR/6.35mm phone jack
combinations) or unbalanced (RCA)
inputs.

CH-2 CH-1

CH-2 CH-1

OUTPUTS

CH-2

GND

CAUTION

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)
PLUG WITH

AN EXTENSION CORD RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE

CAUTION:

BRIDGE

CH-1

GROUND LIFT

GROUND LIFT

INPUTS

MONO

STEREO BRIDGE

12

3

HOT(+)

COLD(

-

)

GND(+)

BALANCED INPUTS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Channel 1 and Channel 2 Power LED Display

Indicate the output signal level for each channel.

AC 120V 60HZ

~

ON

OFF

CHANNEL 2

MIN MAX

CHANNEL 1

MIN MAX