Pyle Pro PYP-1 Owner's Manual

Owner’s Manual

PYP-1 Stereo Control Preamplifier

PYLE PRO ELECTRONICS

warranty registration card

Thank youfor purchasing thisPYLE

product. To activate your

warranty, please mail thiscard

within 10 days.

Name

Address

City, State ZIP

Model No. Serial #

(if available)

Date of Purchase

Purchased at:

Music Products Store

Catalog Merchandiser

Sound Contractor/Installer Mail Order

Other

Please complete warranty card, detach and return

FUSE

PLAY REC

L

R

L

R

PHONO AUX CD TUNER

TAPE OUTPUT

L

R

INPUT

L

R

1212

Left and Right Input Connectors

For connecting the PYP-1 to a TAPE PLAYER,
TUNER, CD, AUX, and PHONO input sources.
The AUX features both1/4" or RCA type input
jacks.

Left and Right Output Connectors

The PYP-1 offers a choice of 1/4" or RCA type
output jacks for connecting to the inputs of
your graphic equalizer or power amplifier.

Ground
Screw

Fuse
Holder

Tape Recorder Inputs/Outputs

For recording to and playing from a tape
player or recorder.

Your Pyle Pro PYP-1 Preamplifer has been created
to provide the home stereo audiophile with a
sophisticated control center for tailoring the sound
quality from multiple input sources and direcing
the signal to a sound processor or power amplifier
for playback.

The PYP-1 features a balance control, master volume
and mic output level controls, and BASS, MID,
TREBLE, and LOUDNESS controls for improving
and adjusting sound quality.

The PYP-1 provides both RCA and 1/4 inch connectors
on the aux input and output jacks, expanding options
when selecting input and output devices.

FEATURES AND CONTROLS

i – PYLE PRO PYP-1 Stereo Control Preamplifier Owner’sManual PYLE PRO PYP-1 Stereo Control Preamplifier Owner’s Manual -1

FRONT PANEL

Please read this manual thoroughly before you attempt
to set up and use this peramplifier. It contains a range
of installation suggestions as well as instructions to
ensure safe usage. Installed properly, you can expect
years of trouble-free service from this product.

MIN MAX MIN MAX MIN MAX MIN MAX Left RIGHT

TAPE TUNER CD AUX PHONO

LOWFILTER HIFILTER MONO MUTING

MIN MAX

POWER

MIN MAX

BASS MID TREBLE

VOLUME

MIC LEVEL LOUDNESS BALANCE

MIC

STEREO CONTROL PREAMPLIFIER

PYP-1

Power On/Off

Microphone Input Jack
and Level Control

Lets you connect and
adjust input signal from
microphone

Loudness Control

Compensates for loss
of low frequencies at
low volumes.

Tone Controls

Adjusts levels of BASS,
MID, and TREBLE

Master Volume
Control Adjusts

output level of
speakers

Balance Control

Controls relative
volume of left
and right speakers

Low Frequency Filter For elimination
of turntable rumble and other low
frequency noise

Stereo/Mono Switch Selects Stereo or
Mono input signal.

Muting Switch Reduces volume level
by 20dB

High Frequency Filter For elimination
of record scratches and other high
frequency noise

Input Source Selectors Select signals
from TAPE, TUNER, CD, AUX or PHONO
jacks.