Pyle Pro PYD-1910, PYD-1930, PYD-1950, PYD-1940, PYD1920 Owner's Manual

14 – Pyle Pro Mixer Owner’s Manual

R.A.#: _____________
PYLE PRO ServiceCenter
1600 63rd Street
Brooklyn, NY 11204

You must alsoinclude the following items with yourreturn:

• A copy ofyour sales receiptor other proofof purchase

• A brief letter,indicating the problemyou are experiencingwith the product

• Include in yourletter your returnaddress, daytime phonenumber and R.A.number

• Also include acheck or moneyorder for $15.00for return

shipping, handlingand insurance, orprovide your Visa/MCnumber with expirationdate.

Our obligation underthis warranty is limited tothe repair or replacement
of the defectiveunit when it is returned tous prepaid. This warranty will
be considered voidif the unit was tampered with,improperly serviced or
subject to misuse,neglect or accidental damage.

Limited Warranty

PYLE PRO MIXERS

warranty registration card

Thank youfor purchasing thisPYLE
product. To activateyour
warranty, please mailthis card
within 10 days.

Name

Address

City, State ZIP

Model No. Serial #

(if available)

Date of Purchase

Purchased at:

Music Products Store
Catalog Merchandiser

Sound Contractor/Installer Mail Order
Other

Please complete warranty card, detach and return

Specifications

PYD1910/1920/1930/1940/1950

Input Sensitivity/Impedance

Mic 1-2
Phono 1-2
Line 1-6

Output Level

Amp
Zone
Record

Frequency Response

S/N Ratio (at 1 kHz)

Mic
Phono
Line

Distortion

Mic
Phono
Line

Equalizer

Control Frequencies

Boost/Cut Range

MIC Tone Control

Treble
Mid
Bass

Talkover Attenuation

Echo Delay Time

(PYD-1920/1940)

Sampling Length

(PYD-1950)

Power Source

Dimensions, inches

(mm)

30, 60, 120, 250, 500
1K, 2K, 4K, 8K, and 16KHz

+/- 10 dB from center

10kHz; +10/-30dB
1 kHz; +10/-30dB
100Hz; +10/-30dB

-16dB

50mS-120mS

12 Seconds

120 VAC, 60Hz/230 VAC, 50 Hz

19.0 x 4.13 x 9.45
(482 x 105 x 240)

1.5 mV/600 Ohms, bal/unbal

3.0 mV/50K Ohms

150.0 mV/27K Ohms

2.0 V/10-kOhms

2.0 V/10-kOhms
150mV/10-kOhms

20Hz – 20kHz +/- 3 dB

>60 dB/1.5mV input
>70 dB/3.0mV input
>80 dB/150.0 mV input

0.20%

0.05%

0.03%

All PYLE PROproducts are carefully constructed andtested before shipment.
Units purchased inthe USA are warranted to befree of defects in material
and workmanship fortwo (2) years from thedate of purchase. This warranty
is limited tothe original retail purchaser of themixer.

Should the unitfail due to factory defects inmaterial or workmanship, your
unit will berepaired or replaced at the solediscretion of PYLE.

To obtain warrantyservice, you must first call ourConsumer Return Hotline
at [phone]to obtain a Return AuthorizationNumber. This R.A. # must
appear on theoutside of your package andon all paperwork relating to your
return.

When returning theunit to us for warranty service,it must be carefully
packed and shipped,prepaid, to:

pro series

PYD-1910/PYD1920

PYD-1930/PYD-1940

PYD-1950

4 channel

professional

www.pyleaudio.com

Your PYLE PRO Series Performance Mixer

is a sophisticated control center, perfect for mixing sound from multiple playback sources such as
microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly
constructed for home or professional use. Wide range volume controls permit you to adjust sound levels
accurately to achieve just the right mix for playing through your speaker system or for recording.

Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a
range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect
years of trouble-free service from this product.

Input/Output Features: all models

Ground Screw

for turntables

Features and Controls: PYD1910 Mixer

Pyle Pro Mixer Owner’s Manual – 1i – Pyle Pro Mixer Owner’s Manual

Owner’s Manual Table of Contents

Input/Output Features
Features and Controls: PYD-1910
Features and Controls: PYD-1920
Features and Controls: PYD-1930
Features and Controls: PYD-1940
Features and Controls: PYD-1950
Presetting Controls Before Use
Connecting the Mixer Inputs
Using the Gain Controls
Connecting the Mixer’s Outputs

to Amplifiers
to Recorders

to Zone Speakers
Using Headphones
Connecting the Lamp
Using the Mixer Controls
Turning On the Mixer

Monitoring (”Cueing”) Inputs
Mixing Inputs
Adding Equalization to the Mix
Adding External Effects to the Mix
Using the MicrophoneTalkover Mode
Microphone Tone and Level Controls
Using the MIC Kill Frequency Switches
Using the Mono/Stereo Switch
Using the Crossfader w/Assign Switches
Using the Echo Controls

(PYD-1920 and PYD-1940)

Using the Sound Effects (PYD-1930 andPYD-1940)
Using the Digital Sampler (PYD-1950)
Troubleshooting
Care and Maintenance
Specifications
Warranty

i
1
2
3
4
5
6

8

9

10

10

11

12

13

14

Stereo Line Inputs let you connect
most high-level audio sources, such as
CD players, tape deck, tuner or VCR.

Dual Purpose Stereo Inputs for
using a turntable with a magnetic
cartridge OR a high level input
source

MIC2 Microphone
connector permits

you to connect a
balanced or
unbalanced low
impedance microphone
with 1/4” plug.

Input Select Switches – setthese
switches based on what is plugged
into Phono1/Line1 and Phono2/Line3
input jacks

Output Jacks to connect the mixer to a
receiver or amplifier –choose to use cables
with either 1/4” plugs or RCA plugs.

Zone Output Jacks to connect the mixer
to a second receiver or amplifier powering
speakers in the DJ booth or in a remote
location

Record Output Jacks to connect the
mixer to a tape deck for recording the
mixed program

Power Switch andLED
Indicator

Equalizer On/OffSwitch

Effect Switch
(Send/Receive) Lets you

connect a soundeffect
device, such asreverb,
sampler,etc. and eitherplay
the signal fromit or play
another input throughit.

BNC LampAdaptor Allows
you to connecta 12V/3W
lamp to lightthe panel

Headphone Jack

Accepts headphones with
1/4” plug

Headphone LevelControl

Headphone CUE/PGM
Control Allowsyou to listen

simultaneously orseparately
to the CUEmaterial or the
active program

Zone Level ControlLets you control themixer’s overall ZONE
volume level, ifyou set up remotespeakers or DJ booth monitors

Zone Mono/Stereo Selector

Zone Balance Control

Master LevelControl Lets you control mixer’soverall volume level

Master Mono/Stereo Selector

Master Balance Control

Channel AssignSwitch Lets youselect the input sourceto be mixed

by the CrossfadeSlider Control

Crossfade Slider ControlAllows you to smoothlyswitch between
the input sourcesassigned to Channel Aand Channel B

MIC Talkover Allowsyou to lower the
level of theinput sources so youcan talk
them using theDJ Mic

MIC1/2 Level ControlsLets you control
the MIC levelsas they enter themix

MIC1/2 Tone Controls

10-Band Equalizer Allowsyou to tailor themixer output to suit

your taste orperformance environment. Each frequencyrange can
be cut orboost by up to10dB.

Dual Display MeterIndicates the levels ofLeft and Right Master
Channels

Channel CUE SwitchAllows you to monitorthe selected audio
input source andprepare it prior tomixing it in.

Channel Input SelectorLets you choose theinput source to play
for each channel

Channel GainControl Lets you adjustthe gain of theinput source

MIC FrequencyKill Switches Allows

you tokill the selected frequencyrange
instantly for interestingeffects. LED
lights to indicatekill is activated.

MIC 2 InputJack (on input panel)

For connecting a balanced or
unbalanced lowimpedance microphone
with 1/4”plug

MIC 1 ComboInput Jack For
connecting a balancedor unbalanced
low impedance microphonewith XLR­type or 1/4”plug

Effects Send/Receive jacks permits you to either include
externally generated effects (such as a digital sampler or synth)
IN the mix, or to process the mixed sound (echo reverb, etc.).

Features and Controls: PYD1930 Mixer

Pyle Pro Mixer Owner’s Manual – 32 – Pyle Pro Mixer Owner’s Manual

Features and Controls: PYD1920 Mixer

Equalizer On/OffSwitch

Effect Switch
(Send/Receive) Lets you

connect a soundeffect
device, such asreverb,
sampler,etc. and eitherplay
the signal fromit or play
another input throughit.

BNC LampAdaptor Allows
you to connecta 12V/3W
lamp to lightthe panel

Headphone Jack

Accepts headphones with
1/4” plug

Headphone LevelControl

Headphone CUE/PGM
Control Allowsyou to listen

simultaneously orseparately
to the CUEmaterial or the
active program

Zone Level ControlLets you control themixer’s
overall ZONEvolume level, if you setup remote
speakers or DJbooth monitors

Zone Mono/Stereo Selector

Zone Balance Control

Master LevelControl Lets you control mixer’soverall volume level

Master Mono/Stereo Selector

Master Balance Control

Channel AssignSwitch Lets youselect the input sourceto be mixed

by the CrossfadeSlider Control

Crossfade Slider ControlAllows you to smoothlyswitch between
the input sourcesassigned to Channel Aand Channel B

MIC Talkover Allowsyou to lower the
level of theinput sources so youcan talk
them using theDJ Mic

MIC1/2 Level ControlsLets you control
the MIC levelsas they enter themix

MIC1/2 Tone Controls

10-Band Equalizer Allowsyou to tailor themixer output to suit

your taste orperformance environment. Each frequencyrange can
be cut orboost by up to10dB.

Dual Display MeterIndicates the levels ofLeft and Right Master
Channels

Channel CUE SwitchAllows you to monitorthe selected audio
input source andprepare it prior tomixing it in.

Channel Input SelectorLets you choose theinput source to play
for each channel

Channel GainControl Lets you adjustthe gain of theinput source

MIC FrequencyKill Switches Allows

you tokill the selected frequencyrange
instantly for interestingeffects. LED
lights to indicatekill is activated.

MIC 2 InputJack (on input panel)

For connecting a balanced or
unbalanced lowimpedance microphone
with 1/4” plug

MIC 1 ComboInput Jack For
connecting a balancedor unbalanced
low impedance microphonewith XLR­type or 1/4”plug

Equalizer On/OffSwitch

Effect Switch
(Send/Receive) Lets you

connect a soundeffect
device, such asreverb,
sampler,etc. and eitherplay
the signal fromit or play
another input throughit.

BNC LampAdaptor Allows
you to connecta 12V/3W
lamp to lightthe panel

Headphone Jack

Accepts headphones with
1/4” plug

Headphone LevelControl

Headphone CUE/PGM
Control Allowsyou to listen

simultaneously orseparately
to the CUEmaterial or the
active program

Zone Level ControlLets you control themixer’s overall ZONE
volume level, ifyou set up remotespeakers or DJ booth monitors

Zone Mono/Stereo Selector

Zone Balance Control

Master LevelControl Lets you control mixer’soverall volume level

Master Mono/Stereo Selector

Master Balance Control

Channel AssignSwitch Lets youselect the input sourceto be mixed

by the CrossfadeSlider Control

Crossfade Slider ControlAllows you to smoothlyswitch between
the input sourcesassigned to Channel Aand Channel B

MIC Talkover Allowsyou to lower the
level of theinput sources so youcan talk
them using theDJ Mic

MIC1/2 Level ControlsLets you control
the MIC levelsas they enter themix

MIC1/2 Tone Controls

10-Band Equalizer Allowsyou to tailor themixer output to suit

your taste orperformance environment. Each frequencyrange can
be cut orboost by up to10dB.

Dual Display MeterIndicates the levels ofLeft and Right Master
Channels

Channel CUE SwitchAllows you to monitorthe selected audio
input source andprepare it prior tomixing it in.

Channel Input SelectorLets you choose theinput source to play
for each channel

Channel GainControl Lets you adjustthe gain of theinput source

MIC FrequencyKill Switches Allows

you tokill the selected frequencyrange
instantly for interestingeffects. LED
lights to indicatekill is activated.

MIC 2 InputJack (on input panel)

For connecting a balanced or
unbalanced lowimpedance microphone
with 1/4” plug

MIC 1 ComboInput Jack For
connecting a balancedor unbalanced
low impedance microphonewith XLR­type or 1/4”plug

ECHO Level ControlControls the depth ofthe echo effect

ECHO Repeat ControlLets you control thetime period

during which theecho is repeated

ECHO Delay ControlLets you adjust thedelay time for
the echo

ECHO On/Off Switch

Sound Effect CUESwitch Lets you monitorthe

selected sound effectbefore mixing it in

Sound Effect VolumeControl Lets you control
the volumelevel of the soundeffect within the mix

Sound Effect SpeedControl Lets you control
the pitch ofthe selected sound effect

Digital SoundEffects Selectors Lets youcreate
special sound performancemixes from the eight
preprogrammed special effects

Power Switch andLED
Indicator

Power Switch andLED
Indicator