Pyle Pro PT-2400, PT-2800 Owner's Manual

PT-2400 Amplifier

PT-2800 Amplifier

Owner’s Manual

PYE PRO AMPLIFIERS

warranty registration card

Thank youfor purchasing thisPYLE

product. To activate your

warranty, please mail thiscard

within 10 days.

Name

Address

City, State ZIP

Model No. Serial #

(if available)

Date of Purchase

Purchased at:

Music Products Store

Catalog Merchandiser

Sound Contractor/Installer Mail Order

Other

Please complete warranty card, detach and return

All PYLE PRO productsare carefully constructed and tested before
shipment. Units purchased inthe USA are warranted to be free of
defects in material andworkmanship for two (2) years from the date
of purchase. This warrantyis limited to the original retail purchaser
of the amplifier.

Should the unitfail due to factory defects in materialor workmanship,
your unit will berepaired or replaced at the sole discretion of PYLE.

To obtain warranty service,you must first call our Consumer Return
Hotline at [phone]to obtain a Return Authorization Number.
This R.A. # mustappear on the outside of your package and onall
paperwork relating to yourreturn.

When returning theunit to us for warranty service,it must be carefully
packed and shipped, prepaid,to:

R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204

You must also includethe following items with your return:

• A copy ofyour sales receipt or other proof of purchase

• A brief letter,indicating the problem you are experiencing

with the product

• Include in yourletter your return address, daytime phone

number and R.A. number

• Also include acheck or money order for $15.00 for return
shipping, handling and insurance, or provide yourVisa/MC
number with expiration date.

Our obligationunder this warranty is limitedto the repair orreplacement
of the defective unitwhen it is returned to us prepaid. This warranty
will be considered voidif the unit was tampered with, improperly
serviced or subject tomisuse, neglect or accidental damage.

Limited Warranty

www.pyleaudio.com

Please read this manual throughly before you attempt to set up and use the amplifier. It contains a
range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you
can expect years oftrouble-free service from this product.

1 Features and Controls
2 Installation Guidelines
2 Input Connections
2 Connecting a CD or tape player or tuner
2 Connecting an equalizer or signal processor
2 Stereo or Mono Inputs
2 Speaker connecitons
3 Bridged Mode Operation
3 Using headphones
3 Connecting to standard AC power
3 Mounting the amplifier
3 Turning the amplifier on
3 Using the power meter
3 Using the left and right output level controls
3 About the internal clip circuitry
3 Using the A/B Speaker Selector Switch
3 Caring for your Pyle Pro Amplifier
3 Replacing a fuse
4 Specifications
5 Limited warranty

PYLE PRO PT-2400/2800 Amplifier Owner’s Manual – 1

PYLE PRO PT-2400/2800 Amplifier Owner’s Manual

FEATURES AND CONTROLS

FRONT PANEL, PT-2400/ PT-2800

Left Output Level Controls

Lets you adjust the sound levels of left
channel.
In the mono bridged mode, only the left
gain control will adjust the output level.

Protection Circuit and Indicator

The indicator will be illuminated when the amplifier is
powered on and at turn-on delay status; the indicator will
be turned off after internal outputs are connected. The
indicator will also be illuminated when the amplifier has
abnormal problems, such as overload or excessive heat.

Phone Jack

Lets you connect a pair of stereo
headphones for private listening or cueing
(monitoring) sound prior to "airing" it.

Clip Circuit and Indicator

This special circuitry protects the amplifier and
speaker system from being damaged by overdriving
power levels. Indicator lights remind the user to
reduce the volume when amplifier output is
excessive.

Right Output Level Controls

Lets you adjust the sound levels of right
channel.

Left and Right Power Meters

Indicate the output signal level for each channel.

Speaker A/B Selector Switches

Permit you to select speakers attached to terminal
set A, set B, or both.

FEATURES AND CONTROLS

REAR PANEL, PT-2400/ PT-2800

Voltage Switch

The amplifier has selectable input voltage from 110V/60Hz which is
the standard in USA and CANADA. You can also switch the input voltage
to 220V/50Hz for EUROPEAN operation. Please make sure the switch
is in the proper position before operating, otherwise severe damage
will result not cover by the warranty. Please also replace the fuse with
proper rating in this situation (see the SPECIFICATIONS for the fuse
rating).

Switched AC Accessory Outlet

There is supplied AC OUTLET
(SWITCHED MAX. 300W) which allow
the electrical hook up of other units.

Mono Bridged Output

Connect the speaker's positive (+)
to the amplifier's LEFT/RED (+)
terminal and negative (-) to the
amplifeir's RIGHT/RED (+) terminal.

Fan Cooling

Cooling system is automatically activated
whenever amplifier is turned on. This forced
air cooling system rapidly exhausts interior
heat, reducing operating temperature and
aiding performance.

Speaker Terminals

Permit hook up of two stereo pair of
speakers via the wire terminals.
You can choose either Channel A , Channel
B, or use both at the same time.
Speaker impedance can range from 4 to 16
Ohms.

Stereo/Mono Switch

Lets you select bridged mono input
mode in combination with a mono
signal source plugged into the LEFT
input channel, or conventional
stereo operation with a stereo input
signal.

Input Jacks

Let you connect a variety of audio input
sources via the balanced (XLR/6.35mm
phone jack combinations) or unbalanced
(RCA) inputs.

Your New Pyle Pro PT series P.A.
Amplifier gives you the power and
versatility you need in a professional
sound system.
The amplifier's wide frequency
response makes it suitable for
amplifying music or vocal program
material. It can be used for live bands,
office paging systems, public
announcements, or a variety of other
installations.

TABLE OF CONTENTS