Pyle Pro PDSP850 Owner's Manual

Owner’s Manual

PDSP850 Digital Sampler Processor

www.pyleaudio.com

PYLE PRO ELECTRONICS

warranty registration card

Thank youfor purchasing thisPYLE

product. To activate your

warranty, please mail thiscard

within 10 days.

Name

Address

City, State ZIP

Model No. Serial #

(if available)

Date of Purchase

Purchased at:

Music Products Store

Catalog Merchandiser

Sound Contractor/Installer Mail Order

Other

Please complete warranty card, detach and return

Your PYLE PRO series Digital Sampler Processor is
created to provide the stereo audiophile with a
sophisticated control center for sampling the sound
from multiple input sources and directing the signal
to a sound processor or power amplifier for playback.

i – PYLE PRO PDSP 850 Owner’s Manual PYLE PRO PDSP850 Owner’s Manual -1

Please read this manual throughly before you attempt
to set up and use this PDSP850. It contains a rang of
installation suggestions as well as instructions to
ensure safe usage. Installed properly, you can expect
years of trouble-free service from this product.

MEMORY BANK Mode Selector,
1/2-BANK & 3-BANK

Lets you select to deicde the
BANK mode for memory.

VOLTAGE Selector

REC OUTPUT Jacks

To connect the PDSP850 to a tape
deck for recording the program.

LINE OUTPUT Jacks

To connect the PDSP850 to a
amplifier or mixer.

LINE 2 INPUT Jacks

To connect the high levelaudio sources,
such as CD players, tape deck, tuner,
or VCR.

PHONO/LINE 1 INPUT Jacks

Let you choose to connect the high
level audio sources (LINE 1), or a
turntable with a magnetic cartridge
(PHONO).

INPUT SELECTION SWITCH - LINE
1/PHONO

Set this switch based on what is
plugged into PHONO/LINE 1 input
jacks.

MIC OUT

To connect the MIC
OUT to the MIC INPUT
of your mixer or
amplifier.

GROUND

For turntables

FEATURES AND CONTROLS

FRONT PANEL

Power On/Off

MIC Input Jack and
SAMPLER MIC

To connect input signal
from microphone and
push on the SAMPLER
MIC switch for making
samples from the
microphone.

INPUT LEVEL Control

Lets you adjust the gain
of the input source.

SAMPLER PAN Control

Lets you adjust the balance
of the recorded sample.

SAMPLER LEVEL Control

Lets you adjust the output
volume of the recorded
sample.

PHONO/LINE 1, OFF, & LINE
2 Source Selection Switch

Let you select the input
source goes through the
PDSP850 to the output units.

SAMPLER MODE
selector, WRITE,
SINGLE, & REPEAT

Let you select to
decide the sampler
function to play.

MEMORY BANK Time
Selector, 4-SEC, 8-SEC,
12-SEC, 16-SEC, or 24­SEC

Let you select to deicde
the memory time of
sampler.

PITCH Control

Lets you adjust the
pitch of the recorded
sample.

START/STOP Control

Lets you control the start and
stop of the sampling process.

REAR PANEL