PYLE Audio Vintage PTTCDS7U Operating Instructions Manual

CAUTION

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT
FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.

1

1) Please read these instructions and keep them for future reference.

2) Pay attention to all warnings.

3) Follow all instructions.

4) Do not use this apparatus near water.

5) Clean only with a dry cloth.

6) Do not block any ventilation openings.

7) Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heaters, stoves, or other
apparatus (including amplifiers) that produce heat.

8) Protect the power cord from being walked on or kinked, in particular where the
plug is fitted and at the point where it exits from the apparatus.

9) Only use attachments / accessories specified by the manufacturer.

10) Unplug this apparatus during lightning storms or when unused for long periods
of time.

11) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

12) This appliance should not be exposed to dripping or splashing water and no
object filled with liquids, such as vases, should be placed on the apparatus.

13) Do not overload the wall power outlet. Use only power source as indicated - i.e.
120V AC mains.

2

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters, on top of other stereo equipment that radiates too
much heat, places lacking ventilation or dusty areas, places subject to constant vibration
and/or humid or moist areas.
Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use
a clean dry cloth.Operate controls and switches as described in the manual.Before turning
On the power, make certain the AC power cord is plugged in. Store your CDs, Cassettes in
a cool area to avoid damage from heat.When moving the set, be sure to first disconnect the
power cord.

Place the unit on a stable, level surface, convenient to an AC outlet, out of Direct
sunlight, and away from sources of excess heat, dust, moisture, humidity or strong
magnetic fields.

IMPORTANT NOTES

PREPARATION FOR USE

3

This product is designed to operate on 120V 60Hz AC Mains only. Attempting to operate
this system from any other power source may cause damage to the system, and such
damage is not covered by your warranty.
NOTE: You will note that this system is equipped with domestic standard AC power 2-pin
plug. If this plug does not fit into your existing
AC outlet, do not try to defeat this safety
feature by filing the wide blade to make
it fit into your outlet. If this plug will not
fit into your outlet, you probably have
an outdated non-polarized AC outlet.
You should have your outlet changed
by a qualified licensed electrician.

AC Plug

AC Outlet

4

5

36

37

38

39

40

41
42

43

44

45

46

CD

USB

SD

FOLDER