PYLE Audio PYD-1002, PYD-1005 User Manual

PYD-1002/PYD-1005

Your PYLE PRO Series Performance Mixer

is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.

Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect years of trouble-free service from this product.

Owner’s Manual Table of Contents

Input/Output Features

Features and Controls: PYD-1002

Features and Controls: PYD-1005

Presetting Controls Before Use Connecting the Outputs Playing the Mixer’s Output Signal Recording the Mixer’s Output Signal Monitoring the Mixer’s Output Signal in DJ Booth (PYD-1005)

Connecting the Mixer Inputs

Connecting the Lamp Using Headphones

Using the Mixer Controls

Using the Microphone

Using the Crossfader

Using the Tone Controls Using the Kill Frequency Switches Using the Zone Level Control (PYD-1005) Using the Master Balance Control(PYD-1005)

Using the Master Level Control Dual Meter Modes Using the Punch Controls

Troubleshooting

(PYD-1005)

Care and Maintenance Specifications

Warranty

(PYD-1005)

Input/Output Features: PYD1002/1005

Stereo Line Inputs let you connect most high-level audio sources, such as CD players, tape deck, tuner or VCR.

Ground Screw for turntables

MIC2 Microphone rear panel connector permits you to connect a

balanced or unbalanced low impedance microphone with 1/4” plug.

Output Jacks to connect the mixer to a receiver or amplifier – choose to use cables with either 1/4” jacks or RCA plugs.

Record Output Jacks to connect the mixer to a tape deck for recording the mixed program

Zone Output Jacks to connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location(PYD-1005)

PHONO Stereo Inputs for using a turntable with a magnetic cartridge

i – Pyle Pro Mixer Owner’s Manual

Features and Controls: PYD1002 Mixer

MIC 1(DJ Mic) Input Jack

accepts balanced or unbalanced inputs with either XLR or 1/4” plug

MIC Talkover Switch lowers the

level of input sources, permitting you to talk over them using a microphone

MIC 1 Level Control adjusts the

microphone volume level within the mix

MIC 2 Level Control controls the

volume of the secondary microphone

Tone Controls

permit adjustment of the treble and bass of a selected input

Input Source Selector lets you

easily select your choice of audio inputs for mixing

Dual Display Meter displays your choice of Master Input Left and Right Levels, or Phones Output Levels for CUE and PGM

Meter Mode Switch and LED Indicators permit you to display either Cue and Summed Program levels OR Left and Right Channel Levels

BNC lamp socket allows you to add a 12V/3W lamp to illuminate the control panel

Power Switch and LED indicator

Cue Level Control sets the

listening level for the headphones

Master Level Control adjusts the mixer’s overall output volume level

Sound Effect Volume Control

Lets you control the volume level of the sound effect within the mix

Digital Sound Effects Selectors

Lets you create special sound performance mixes from the six preprogrammed special effects

Channel Level Controls allow

fingertip control of all sound mixing and fading

Crossfader Control

lets you quickly and smoothly switch and mix between two playing input sources

Cue Selectors let you “preview” an input source, using the headphones, so you can adjust the volume prior to mixing it in

Headphone Jack accepts 1/4” plug

Pyle Pro Mixer Owner’s Manual – 1

Features and Controls: PYD1005 Mixer

MIC 1(DJ Mic) Input Jack

accepts balanced or unbalanced inputs with either XLR or 1/4” plug

MIC Talkover Switch lowers the

level of input sources, permitting you to talk over them using a microphone

MIC 1 Level Control adjusts

the microphone volume level within the mix

MIC 2 Level Control controls the

volume of the secondary microphone

Kill Tone Frequency Buttons let you

eliminate the selected frequency range instantly (great for special effects); the LED is illuminated when the kill switch is activated.

Tone Controls

permit adjustment of the treble, midrange and bass of a selected input

Input Source Selector lets you

easily select your choice of audio inputs for mixing

Channel Level Controls

allow fingertip control of all sound mixing and fading

Dual Display Meter displays your choice of Master Input Left and Right Levels, or Phones Output Levels for CUE and PGM

Meter Mode Switch and LED Indicators permit you to display either Cue and Summed Program levels OR Left and Right Channel Levels

BNC lamp socket allows you to add a 12V/3W lamp to illuminate the control panel

Power Switch and LED indicator

Cue Level Control sets the

listening level for the headphones

Zone Level Control permits adjustment of the volume of the Zone Output, if you have installed speakers in the DJ booth or a remote location

Sound Effect Volume Control

Lets you control the volume level of the sound effect within the mix

Balance Control adjusts the balance between Left and Right speakers

Master Level Control adjusts the mixer’s overall output volume level

Digital Sound Effects Selectors

Lets you create special sound performance mixes from the six preprogrammed special effects

Cue Selectors let you “preview” an input source, using the headphones, so you can adjust the volume prior to mixing it in

“Punch” buttons let you quickly and easily switch the input sources on and off for unusual and exciting effects

Crossfader Control

lets you quickly and smoothly switch and mix between two playing input sources

2 - Pyle Pro Mixer Owner’s Manual

Headphone Jack accepts 1/4” plug

Crossfader Assign Switches

(A and B) let you select the input sources for crossfade mixing

Presetting the Controls Before Use

Power On/Off Balance Tone Controls, Treble, Mid and Bass MIC 1/2, CH 1/2/3, Master and Cue Levels Crossfader

OFF MID 0 0 CENTER

Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit.

Set up the mixer controls like this before you start:

CONTROL SETTING

Connecting the Outputs

After presetting the controls (above), you can then connect the mixer’s output jacks to the output devices’ input jacks. Before connecting these devices, however, be sure to preset their controls to avoid any damage to your equipment due to unexpected high output levels.

Set the output devices’ controls like this before you start:

OUTPUT DEVICE SETTINGCONTROL

Tape Deck Amplifier/Receiver

POWER POWER

TONE

OFF OFF

FLAT

Playing the Mixer’s Output Signal

To play the mixer’s output signal through your speaker system (for events such as parties, dances, conferences, etc.) connect an audio patch cord (not supplied) from the mixer’s MASTER L and R jacks to your receiver’s left and right input jacks. This mixer permits you to choose cables with either RCA jacks or 1/4” jacks for this connection, but do not use both sets of jacks simultaneously.

Recording the Mixer’s Output Signal

To record the mixer’s output signal, connect audio patch cords (not supplied) from the mixer’s REC (Record) L and R jacks to your tape deck’s left and right input jacks.

Monitoring the Mixer’s Output signal in the DJ Booth

To monitor the mixer’s output on a second set of speakers in the DJ booth (or in a remote location), connect an audio patch cord from the mixer’s ZONE L and R jacks to the additional amplifier’s left and right input jacks.(PYD-1005)

Pyle Pro Mixer Owner’s Manual - 3

+ 10 hidden pages