WIRELESS RECHARGEABLE
PORTABLE AMPLIFIER
USER'S
MANUAL
We
thank
start
thoroughly
Please
future
you
to
use
this
and
keep
this
reference.
for
your
amplifier
carefully.
instruction
purchasing
systeml please
book
this
in
amplifier
a
safe
read
place
system.
the
manual
after
Before
book
reading
for
WARNING
•
To
prevent fire
• Dangerously high voltages are present inside the unit. Do not open the casing
of
the unit. Refer servicing to qualified personnel only.
• Recharge the built-in
To
prevent the rechargeable battery from being damaged, make sure that the
•
power
ON/OFF switch
in
• All
• Uni-directional Lavalier microphone with high sensitivity for clearly voice
• Quartz stabilizer for carrier frequency transmission to avoid interference.
• The system works on both
• Amplifier working in VHF band and there are 98 different possible channels
• SMT technology and SMD electronic components used
• 3 styles
• Tone control.
• Wired/wieless microphone
• Aux input for connecting to MD/CD etc.
• 9V common battery
•
one design for easy carrying and portable use.
transmission and receiving.
battery
is not included, call us for optional purchase)
ready for max a group
Time.
so the quality is very stable and last long.
handheld mic, headset mic and Lavalier mic
altematively.
be used
wireless transmitter.
FM
Radio Function.
or
shock
hazard, do not expose the unit to rain
12V
DC rechargeable battery before
of
the PA system is turned
AC
and DC.You can also use the built
or
with car cigarette lighter power for 12V DC.(The power cord for car
of
98 amplifiers working
of
microphones are good for different purposes. You can use the
or
8AV
rechargeable battery can
in
the wireless handheld microphone and the
off
after each use.
at
the same place and same
in
or
moisture.
any
use
ofthe
in
rechargeable
building this amplifier,
Meeing
unit.
This unique designed amplifier
the followimg applications.
• Used as lecturing amplifier indoor
teachers}.
• A perfect address delivery system for
churches.
• It is a good amplifier for interpretation, class teaching and commercial vendor
demonstrations.
With this amplifier system, you can make yourself a clear sound and heard
from far!
speaker
system with microphone is perfect
or
outdoor.(Especialiy for dancing and gym
in
and out door meeting, tourism and
for
Classroom teaching
Game
PWMA200
(single channel main frame) standard match
1.
One set
2.
Apiece
3.
One headset MIG.
4.Wired
of
main frame.
of
Lavalierwireless MIG with transmitter
microphone
Note:
I.Lavalier
optional.
2.The
time
or
handheld wireless microphones
same channel microphones can't work at the same
in
single
channel
receiver.
for
custome~s
Operation
System
1.
Plug
in
theAG
you
are
using
power.
2.
Switch the main power ON, the LED on the body will be lit. After using the
sytem, make sure to turn the main power off to avoid the battery built-in damaged.
3.
When
theAG
to work in DG power no delay.
4. Fully hang up the antenna
of
range
meets the same
wave,
the antenna to reduce
5.
Adjustlhe
the wireless MIG,
it
occurs
of
the
system
operation
power to the
the correct voltage when
power suddently cut
or
similar
the
noisy
Volume with the control knob to
on
AC
Po~
poweroutletfrom
you
off,
the built-in battery will power the system
of
the main frame to achieve the widest service
or
to
getlhe
best result
channel
voice
or
delete the interference.
strong
or
interuption
a power source. Make sure
plug
in
the
system
toAC
of
radio.
If
the main receiver
interference
phenomenon.
getlhe
of
the
wireless electric
At
this
perfect sound.
time,
adjust
The
system
FM
. -
TURNING
speaker
PWMA200 Single channel main frame(With
Built-in Rechargeable battery)
Radio Tuning
FM
(optional)
Headset
PWMA200 Single channel MAIN
FRAME(Built-in Rechargeable
battery and with FM)
Audio Output
-
[]][!]
Microphone
Wired Mic Input
Wired microphone
volume
Belt
Handheld
Battery
status LED
control
power
Pack
Transmitter
Wireless
MIC
You have to plug the system
off
the main
power
after
each use.
System
1.Turn on the main switch to ON and the
works well.
2.You may use the car cigarette light power connector
to connect the car and the main receiving machine
or use
connect the main receiving machine
12V battery to supply power source to the main
receiving machine.
Warning:After
the
main
"--
__
Warning: Be sure
How
1.
Open the battery compartment by sliding up the cover.
2.
Put the battery into the compartment with correct polaritY,and close the cover.
3.
Plug the Lavalier microphone part to the jack.
4.
Switch
to work.
works
an
external 12V DC power connector to
use
power
to
The replacement
---' weak built-in batteries power
of
voice while using DC built-in batteries power.
battery
the
Acid
dramatically.
to
use
on
the power
on
DC
p-ower..
power
and
the external
it,please
OFF
to
rechargeable
the
make
sure
to
switch
to
avoid
switch
will
be
battery
of
AC power and recharged is needed in case
off
the system main
over
damaged.
and
discharged
battery
occurrence of noises
and
Lavalier MicroRtione
of
the transmitter and when the LED shows,it is ready
LED will
indicate
"tiI·'"7
power
after use, otherwise
and
it
can damage the Lead
shorten
the
the
,'0
and
interruption
battery
battery
output
Connector
of
life
5.
Be careful to adjust the main control
of
the transmitter, start from least volume
and slowly turn it to a appropriate level to hear your voice clearly and with feed
back. The system is ready to use.
6.
After use, you have to take the battery out
of
the transmitter to avoid battery
leaking to damage the transmitter.
MIG
cover4)0
9V
batteIy
Chamber
Lavalier Wireless transmitter Lavalier
• i
~
·
I
Cover
~
o
Wireless
PoNerLED.
VOI~me
PoNer
MIC
MIC
1 . Open the battery cover.
2.
Put the battery into the compartment and
make sure you have a right polarity before
you use
3.
Turn the switch to ON and you can use the
microphone
4.
Please take the battery out if you are not going
it.
now.
to use it for a period of time.
If
the
LED
flash
up,
it
shows
LED
is
on,
it
shows
that
the
the battery before
flash
and
not
on,if
you
can use
shows
wrong.
MIC.
net head
I
Indicator
Hoi er
Switch
SVJilch
pat
battery
thw
":~...
..•.
'mouth.
Belt pack style
the
battery
the
battery
sound
--~
YO"
"'"
nearer distance
between
microphone and
Don't
putthe
microphone directiy towards
the horn of the main receiver in near distance,
or it
will occur screaming feedback.
is
good
is low,
you
system.
is
If
dead
9V Battery
Battery
Ba~se
effect
from
the
,etthe
batte, U
the
your
~
Headset
to
use.
If
have
to
change
the LED
or
does
polarities
MIC
the
not
are
52-L
______
Handheld
wireless
....JJl="---'
MIC
~en
How to use a wired
Just plug the microphone to the wired mic input jack,
you hear your voice immediately.
q
How to adjust ttie
You
may turn the Tone knob to its best position for your satisfactory.
Audio output will go to the recording
system and you can record while
using the amplifier system.
Wrreless receIVIng
VOlum',.wntroliJ
~~~'"
-
-=J
' .
How to use the
Connect the cable
Input Jack to get the music sound amplifying.
Adjust the volume depend on your requirement.
How
to
adjust
The speaker volume control will adjust the amplifier volume to its best sound level.
How
to
use
In
order to multiply volume, a or two wireless microphones with several wireless
of
amplifiers
circumstances
How
Open the battery compartment on the back
Make sure you have right polarity to put the battery into the compartment.
the same frequency can be applied to receive simultaneously
of
to
charge
Aux
of
the CD/MD etc into
the
volume
the
multiply'
large hall or stadium for hundreds
the
9V
theAux
batte~?
of
the system case.
\,-------
r-"--=--"~~+-ti>,.
-f·~=_
or
thousands
Input music
~
lI=.
'0=-
=;--®
CDIMDIETC
of
persons.
volume
in
control
1. Tum the main power on, then adjust the speaker volume
2.
TUrn
the FM radio to
3.
Adjust the volume to a proper sound level.
How
to
charge
your
station. It covers 88-108 MHz.
the
batte~
built
in?
to
a proper level.
1. It is recommended to charge the battery
2. Turn the main switch to "Charge" and the built-in battery will be charged with a
consistent
3.
The charging indicator will change to from bright to dim with the battery charging,
the LED will die
low, you will hear a buzz rominder from the system, asking you to charge the
battery immediately. Recharge the battery over 8 hours before you are going to
use it. When it is full charged over 8 hours, it can operate
current
and
voltage.
of
when the battery is fully charged. When the battery is getting
If
the
1.
battery is
battery is rejuvenated. When the voltage is less than 100V, the
"CHARGE LED" will
over
120V, "CHARGE LED" will keep light and
to
charge
the
battery when
Trouble
If
you have
batteries
9V
a new
charge
2. If
the
shooting
any
problem with the system, please check the main power and
for
microphone sets and rechargeable battery built-in.
battery, please make sure you have put
the
battery.
you
do
not
use system for 90 days, we recommend charging
system every three months
for
the first time use
discharged, the LED will
not
light. When the voltage is more than
the
built-in alarm
over
8 hours.
it
in a correct polarity.
for
8 hours.
for
6 hours.
not
work
it
is normal. You have
warns
you
If
you are using
till
the
to
For the following problems:
Screaming from the speaker
1.
Please adjust the speaker volume to the minimum.
2.
Adjust the transmitter volume control to a low level.
3.
Change the speaker direction to avoid direct feedback.
4. Turn the TONE to the lowest level.
When you low the volume to a level that no feedback can be heard.
Noise
or
abrupt stop
1.
Check the accumulator to see
2.
Built-in battery
3.
Check the cable connection to the speaker. The cable might
long
time
4.
Possible frequency interference with local transmission. Please contact the
dealer
to
low,
please useAC power instead to power the system.
use.
change channels for better reception.
if
it is low
in
voltage.
be
broken after a
No voice heard
1.
One
of
the powers is not turned, please check all power source and make
sure they are all on.
2.
The volume control knobs are turned to lowest level. Make sure they are
proper
in
sound.
3. Lavaliere cables are broken after a long time use.
Take out the
acid damaging the components
the transmitter
to use
itfor
9V
battery to avoid its
if
you are not going
a period
oftime.
of
CAUTION:
Warning: Don't dismantle this product.
The maintenance
be carried out
to
avoid
the
damaging
and
by
a qualified technician
risk
of electric
the
components.
inspection
Technical specifications
Power: AC 110V 50Hz;DC 12V/l.2AH
(built-in rechargeable battery;)
External DC power:
Speaker:
Frequency Range: VHF 160-270MHz
Sensitivity:
Oscillationg Mode: ±O.005% quartz control phase locked
Wireless effective range:
Dimension:
Peak power:
Output power:
We
reserve the right
without
notice
in
advance.
12V/lA
16CM,10W/4Q
10dB/~
UP
lBOX300X
BOW
V (S/N:>60dB)
TO
100FT
max
100MM
20W
of
changing technology and speCifications
of
should
shock
and
our products
Options
of
accessories
Lavalier
Belt
Microphone
Pack
(]
9V battery
Transmitter
12V/1.2AH
Built-in
Headset
battery
Microphone
Wired
Microphone
AMPLIFIER
Output power: BOW(MAX)
Frequency Range: 1 BO-270MHz
SIN:
Power supply:
Output Impedance:
Effective Distance:
BOdB
AC110V
DC 12V-15V
BOO
UPTO 100FT
BOHz
0
TRANSMITTER
Frequency Range: 1 BO-270MHz
Dynamic Range:
Frequency Response:
Working Temperature:
Power supply:
BOdB
100-10KHz
-10"C
-45"C
9V
battery
Battery life: B-10 hours
" 100%recycled paper
L~ 1
00%
papler recycle
PLEASE
APPROPR~TE
TAKE
CARE
OF
www.pyleaudio.com
Loading...