PYLE Audio PWLB805 User Manual
Warning: It needs 2 people to put up some TV! Our company will not
Warning:
responsible for any damage by man-made.
Plasma LCD bracket
2
Fig3a
Fig3b
3
INSTALLATION GUIDE
Item No.:PWLB805Item No.:PWLB805
TV Size Rang 10 24:"-"
Thinnest design: Distance to the wall is only 30mm
Safe lock: install safe bolt to luck up
Max load capacity:15kg/33lbs
-4Important: If don't understand about right install ways, please
consult to normal installing specialist.
Parts:
1
2
3
Step1:Install the display
Step1:Install the display
Letter
1
2
3
A
B
C
D
E
F
G
Qty
1
1
2
4
4
4
4
4
4
4
Description
Monitor Plate
Wall Plate
Safety bolt
M4x8 bolt
M4x12 bolt
M5x8 bolt
M5x12 bolt
M5 washer
Long bolt
Wall anchor
Step 2:Mount the part-b to the wall.(Wood stud, Brick, Solid Concrete and
Step 2:Mount the part-b to the wall.(Wood stud, Brick, Solid Concrete and
Masonry wall mo-unting options are provided below)
Masonry
Wood
Wood stud mounting
wall mo-unting options are provided below)
stud mounting
First determine the required position in the wall.Mark 4 locations at the wall
according to the holes in the , according to the Fig 2a. Then
pre-drill 50mm (at least) deep hole with a 3mm drill bit. Fix the
Wall Plate(2)
Wall Plate(2)
to the wall by bolt ( F ) , as the Fig 2b shows. Please note the hooks in the
Wall Plate(2)
Brick, Solid Concrete and Masonry wall mounting
Brick, Solid Concrete and Masonry wall mounting
is up.
After determine the required position in the wall, mark 4 locations at the
wall according to the holes in the , then pre-drill 50mm (at
Wall Plate(2)
least) deep hole with a 11mm drill bit at the position of marks. Insert the
Wallanchorcovertoeveryhole.Lastfixthe tothewallby
D
A
C
B
E F
G
bolt (F).Please note the hooks in the is up.
Wall Plate(2)
Wall Plate(2)
According to the Fig. 1, mount the
part-a to the back of the LCD . First
determine the right holes,which should
be level to each other, on the part-a
accordingtotheholesinthebackof
the LCD. Mount the part-a to the back
of the LCD by 4 bolts and washers (D).
Carefully: Don'tforcethebolttoLCD
hole,avoidingdamagetopeopleand
instrument. Don't use electronics drill to fasten screw.
-2-
Fig 1
E
A,B,C,D
F
1
Fig2a
Step3mounttheLCDdisplaytothepartbinthewall
Step 3 mount the LCD display to the part b in the wall
Lift the against to the with hole to hole, and
Monitor Plate Wall Plate(2)
Fig2b
2
according to the Fig 3a.Then slide the part a to the slot of the part b,as the
Fig 3b shows.Then tighten the safety bolt.
-3-
Loading...