PYLE Audio PWLB003 User Manual

Fig 3

Caution :This Product LCD /Plasma Wall Mount Bracket is

Caution :

intended for use only with the maximum weights indicated .See apparatus instructions .Use with products heavier than the maximum weights indicated may result in instability causing possible injury .

Plasma LCD bracket

INSTALLATION GUIDE

Item No.:PWLB003Item No.:PWLB003

-4-

Ideal for Flat Panels from 10 to 24""

According VESA standard to design

Thinnest design: Distance to the wall is only 37mm

Easy installing: just glide and embed to finish installing of panel Max load capacity:15kg/33lbs

IMPORTANT: If don’t understand about right install ways, please

consult to normal installing specialist.

Parts:

Step2: Installing wall mount

2 A

C D E

F G

Qty

4 4 4 4

2 2

Name

LCD panel

Wall mount

M4x8 bolt

M4x12 bolt

M5x8 bolt

M5x12 bolt M5 washer

Long bolt Wall anchor

Step2: Installing wall mount Installing ways of batten wall. Use a electronic detector in lay position to detect the position of batten, then making a mark. Put the wall mount in the installing position flatly, using it as template, lining out a hole in the center of batten. Using a aiguille of dia.3mm to drill two 50mm deep holes. Using long bolt to install wall mount carefully.

Installing ways of cement and beton wall Put the wall mount flatly in the installing position, using it as template, lining out the hole on the wall. Use a aiguille of dia.8mm to drill a 50mm hole, embedding the wall anchor to hole, and knocking it into wall lightly.

Carefully:

wall anchor is just fit for cement and beton wall. Don't use

wall anchor in drywall to install bracket.。

Step 3: Installing LCD

According LCD hole's size, deep, position

A-D

to choose bolt.Using M5 washer and chose bolts to install the LCD on the panel. Showing as Fig 2.

Step 1:

Choose

Choose fitting position on the wall.

Important:

Important: Make sure there is

fitting position on the wall.

enough space to spread LCD, considering show size.

This product offers two installing parts: wooden wall and cement wall.

-2-

Fig 1

Fig2

Carefully:

hole, avoiding damage to people and instrument. Don't use electronics drill

Don't force the bolt to LCD

to fasten screw.

Step 4: Button the LCD to wall

Firstly put up the panel and TV, making the small trough on the panel fit to the big trough on the wall mount, according trough to embed the LCD panel into the wall mount, As shown in Fig 3.

Warning:

It needs 2 people to put up some TV! Our company will not

responsible for any damage by man-made.

-3-