PYLE Audio PVNTT5U User Manual

Download

Retro Style Vinyl Turntable With USB-to-PC

Recording Entertainment Center

MODEL PVNTT5U

Operating Instructions Manual

CAUTION

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE

OR SHOCKHAZARD, DO NOT EXPOSE THISAPPLIANCETO RAIN OR MOISTURE.

WARNING:TOREDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK), NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1.)

Read these instructions. Keep these instructions.

2.) Heed all warnings.

3.)

4.)

Follow all instructions. Do not use this apparatus near water.

5.) Clean only with dry cloth.6.)

7.)

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.)

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.)

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into you outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs,

10.) convenience receptacles, and point where they exit from the apparatus.

11. )

Only use attachments / accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time.12.)

13.)

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14.)

This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.

15.)

Do not overload wall outlet. Use only power source as indicated. Use replacement parts as specified by the manufacturer.

16.)

17.)

The product may be mounted to a wall only if recommended by the manufacturer.

18.)

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

PREPARATION FOR USE

UNPACKING AND SET UP

Carefully remove the unit from the display carton and remove all packing

material from the unit.

Unwind the AC power plug and extend it to its full length.

Place the unit on a stable, level surface, convenient to an AC outlet, out of

direct sunlight, and away from sources of excess heat, dust, moisture,

humidity, or strong magnetic fields.

Connect the plug to your AC outlet.

Remove the opaque white plastic stylus

cover from the phonograph stylus by

sliding it in the direction of the arrow.

Discard the stylus cover.

TONE ARM LOCK LEVER

Remove the twist-tie that was used to secure the tone arm during shipment.

Release the tone arm lock lever.

STYLUS COVER

Connect the plug to your AC outlet.

POWER SOURCE

This product is designed to operate on 120V 60Hz AC only. Attempting to operate this system from any other power source may cause damage to the system, and such damage is not covered by your warranty.

NOTE: You will note that this system is equipped with domestic standard AC power 2-pin plug. If this plug does not fit into your

existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet. If this plug will not fitinto your outlet, you probably have an outdated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician.

AC Outlet

AC Plug

IMPORTANT: Raising And Lowering The Lid

To open the lid, raise it as far as it will go until the lid support bracket ‘locks’ in the open position. To close the lid, lift it upward slightly until the lid support bracket ‘unlocks’ , and then gently lower the lid.

TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED. ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These‘feet’are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centres everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.

FRONT PANEL

1) Phonograph Lid.

2) Turntable.

3) TONE ARM.

PC-USB

PH-AUX

4) PC- USB SLOT.

5) PH-AUX SWITCH.

6) AUX IN SOCKET(L/R)

7) LIN E OUT SOCKET(L/R)

8) AC POWER LINE PLUG

LINE OUT

AUX IN

PHONOGRAPH

1) Turntable.

2) 45 RPM Adapter.

3) Automatically shut off.

4) Cue Lever.

5) Speed Selector (33 &4 5 &78 RPM).

6) Tone Arm Lock.

7) Tone Arm with Stylus.

AUX IN OPERATION

1) Set the PH-AUX switch to AUX position. Rotate the volume

control to desert level.

2) Insert the audio cable (not included) into the matching "AUX IN" (L/R)

socket of the unit ,operate A as usual and through the speaker of the

unit, we can hear the sound exported from A.

4 3

5 6 7

the unit

AUX IN

DC IN

PC-USB

PH-AUX

LINE OUT

external device(A)

LINE OUT OPERATION

This system includes a set of sockets(L/R) which

LINE OUT

allow you to record from the Radio or phonograph of this system to an external recording device such as a cassette recorder. Mini-Disc, etc. In any play mode, insert the audio cable(not include) into the matching” ”(L/R) socket of

LIN OUT

the unit, operate the unit as usual, and through the speakers of B, we can hear the sound exported from the unit.

the unit

AUX IN

DC IN

PC-USB

PH-AUX

LINE OUT

external device(B)

PLAYING TURNTABLE

This system includes a full-size, 3-speed, belt-drive turntable. You can play

and RPM records.

45, 78

Set the PC-AUX switch to PH position. Insert the PC-USB line into the

1) Computer. Rotate the volume control to desert level.

Make sure that you have removed the stylus cover from the stylus and

3) have released the Tone Arm Lock that secured the tone arm to the tone arm rest.

Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78

4) RPM. If you are playing 45 RPM singles , place the 45 RPM adapter on the centre spindle.

Place your record on the centre spindle.

Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to the edge of the record. The turntable starts automatically. Use the CUE lever to gently lower the tone arm onto the record.

When the tone arm reaches the end of the record it automatically returns to the tone arm rest and the record player stops.

To turn the system ‘off’ , switch the PH-AUX selector to the AUX position.

NOTE: Do not turn or stop the turntable manually. Moving or jarring the Turntable without securing the Tone Arm clamp could result in damage to the Tone Arm.

33,

AUX IN/PHONO RECORDING

1 Set the PH-AUX switch to PH or AUX in position, playback the

、

tacks on the AUX or PHONO.

2 Install Audacity on your computer using the included disc.

、

3 Set the computer before record:

、

1) Set the volume control attribute record(R) mixer:AK5371

YES and then adjust the volume to max..

2) After open theAudacity, choose Edit preferences enter the

Audacity preferences, choose Recording Device(AK5371);

3) then choose quality Default sample format 16-bit;

4) choose Interface again, the language to choose the ENGLISH, choose

OK to su re all sets. an d press the SKI P TO START, PLAY, RECO RD,

PAUSE, SKIP TO END button of the Audacity soft to set you want

RECORD the tracks.

4 After recording, you can edit the record and export to a variety of

、

formats, including MP3,

WMA, and WAV.

Audacity and USB Connection

It supports Window 95 / or more advanced version, with the EMS memory more than 128MB and Audacity takes space of 5MB.

Window XP/Window 7/Vista

INSTRUCTION FOR PC RECORDING

1. Software installation

1.1) Insert the CD disk into drive of PC,and read it;

1.2) Open the software, double press the file Audacity exe then press next to

go forward

1.3) Choose I accept the agreement, and press”NEXT”to go forward;

;

".", ""

1.4) Press next to go forward;“”

1.5)Choose the desitination location, and press to go forward;

1.6) Press next to go forward;“”

1.7) Waitting for installation finished, and press

1.8)Choose the language as user’s need;

finish to end the installation;“”

2. Recording:

2.1) Open the software;

2.2) Choose

Edit menu,then choose Preferences ;“” “ ”

2.3.Audacity Preferences

NOTE: you need to check your computer audio properties,the

sound recording should be selected sss usb Audio Device” as below.“

2.4. Adjust the output and input volume.

Output Volume Input Volume

2.5.Select the record button • to record the disc, the left and right tracks will show on the interface;

2.5.1 Press this button •,start recording.

2.5. 2 Click the but ton to skip to start;

2.5.3 Click the button to skip to end;

2.5.4 Click the button to play;

2.5.5 Click the button to pause the record play,

2.5.6 Click the button to stop the recording.

3. Export the Music Files for WAV,MP3,Format.

• Once you have finished recording, you should save your music to the

computer.

• Click File menu and move down to Export as WAV format,MP3format or

Ogg Format.

• Click on any format to save the music. and you will be asked for the file

name of the music recording.

• Note:Audacity does not export MP3 files directly, you should download

the LAME MP3 encoder.Alink to find LAME MP3 can be found at http://audacity

Ifdo not see the sund waves on the Interface,when recording please adjust the line in volume as follows;

.sourceforge.net

Specific Steps as follows:

3.1) Download"lame-enc.dll"file,and install it to the software list.

3.2) Open the"Audacity"software,click Main Menu. Select"edit", "Parameter", "File Formats", and dick the "Searcher"

3.3) After opened, it will come to the following menu, click"YES" to go to "Llame-enc. dll", and find the file"s Iocation.

3.4)After you find the"lame-enc.dl"file,open it and dick "Y" to finish the

installation.

THE TURNTABLE DRIVE BELT IS FACTORY FITTED –

USE THESE INSTRUCTIONS ONLY IF THE TURNTABLE

FAILS TO REVOLVE....

STEP 1

Use a screwdriver to remove the black iron C-clip and lift the turntable off the phonograph mechanism.

STEP 2STEP 2

Retrieve the dropped black rubber turntable drive belt and replace it around the column on the bottom of the turntable, then pull it out gently without overstretching and hook the band around the small column point at the edge of the turntable, as shown in the diagram.

STEP 3STEP 3

To fix the turntable back onto the phonograph mechanism, make sure the column point is positioned over the correct place on the phonograph mechanism, while placing the axis of the turntable in the hole on the phonograph mechanism, as shown in the diagram.

STEP 4

Gently turn the turntable until a ‘pop’ sound is heard, which indicates the repositioning of the rubber band. Replace the C-clip to secure the turntable.

PYLE Audio PVNTT5U User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual