PYLE Audio PT-669D User Manual

MECHANICAL DECK

PT-669D

Precautions

Thank you for purchasing this product. Taking time to read these

operating instructions carefully before use will acquaint you fully

with all its features and help ensure optimum performance.

 In order to simplify the explanation illustrations may

sometimes differ from the originals.

RISK OF ELECTRIC SHOCK

DO NOT O PEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an

equilateral, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARMING: To prevent fire or shock hazard, do not expose this

appliance to rain or moisture

Any inspections or adjustments inside the unit may lead

Do not block the ventilation holes on the top of the unit

Do not install the unit in any of the following locations

* Locations exposed to direct sunlight or near objects radiating

* Locations exposed to moisture or humidity.

* Locations with poor ventilation exposed to dust and dirt.

* Locations which are unstable and not perfectly flat or which are

Do not remove the case and bottom panel

to malfunctions and electric shocks. Do not touch any of

the inside parts.

Do not block the ventilation holes

by placing records or other objects over them. This will

increase the inside temperature may lead to a failure or

malfunction.

Installation precautions

since this may result in deterioration in performance of

malfunction:

heat such as heating appliances.

susceptible to vibration.

Power plug

When disconnecting the power cord from the power

outlet, always take hold of the plug, and not the wire,

and pull free. Never connect or disconnect the power

plug with wet hands since you may receive an electric

shock.

Remember to disconnect the power plug from the power

outlet when you do not intend to use the unit for a

prolonged period of time.

Do not wipe with thinners

Wipe the panels and case from time to time with a soft

cloth. Using any kind of thinner, alcohol or volatile

liquid will mar the surface, cause blotching on the

exterior and erase the markings and should therefore

be avoided. Do not use insecticide sprays in the

vicinity.

Dripping warning: The product shall not be exposed to dripping

or splashing and that no objects filled with liquids, such as vases,

shall be placed on the product.

Panel Information

2 3 4 2

DECK B
COUNTER

DECK A PLAYBACK

ON/STANDBY

POWER

PLAY CrO2

DUBBING

1. ON/STANDBY SWITCH

Press button to switch “ON” the unit and press again to switch

“OFF” unit into “STANDBY MODE”. If the unit is left unattended

for long period, remove the plug from the power socket.

2. CASSETTE HOLDER

3. PEAK LEVEL INDICATOR

These indicate the recording level during recording and output

level during playback. The LED indication varies with the signal

strength during recording and playback.

* HIGH SPEED

This lights when in the high- speed dubbing.

* DYNAMIC NR

When you need the Dynamic noise reduction, push the level

switch to the left.

* PLAY CrO2/ METAL

This lights when the CrO2/metal function is operated.

* REC CrO2

This lights when CrO2 function is operated.

4. TAPE COUNTER AND RESET BUTTON (DECK B)

When recording or playing, you can use the tape counter to count

the tape length.

5. REC LEVEL SWITCH

Adjust the record level.

6. CASSETTE OPERATION BUTTONS

● REC

This lights when deck B is in the recording the record-pause

mode.

MIN MA X

REC CrO2

REC/PLAYBACK BECK B

675891016

HI.SP.DUBBING

REC LEVEL

(play): Press to play the tape.

(rewind): Press to rewind the tape

(fast forward):

Press to fast forward the tape.

(stop/eject)

Press to stop the tape. Pressing this button after the tape

stops opens the cassette holder.

(pause):

Press to temporarily stop the tape in the record or playback

mode. Press it again to release the pause mode and restart

the tape.

7. REC CrO2 SWITCH

For recording with CrO2 tape.

8. HIGH SPEED DUBBING SWITCH

When you need dubbing, press this switch and the relative light

will be lit.

9. DUBBING SWITCH

Press the DUBBING switch to get set for further record functions

meanwhile relative light will be indicated.

10. PLAY CrO2/METAL SWITCH

Set these switches to NORM when using normal tape, to CrO2

when using chrome tape, and to METAL when using metal tape.