PYLE Audio PT-2400, PT-2800 User Manual

Purchased at:

Catalog Merchandiser

Music Products Store

Other

Sound Contractor/Installer Mail Order

Date of Purchase

Model No. Serial #

City, State ZIP

Name

Address

product. To activate your

warranty, please mail this card

within 10 days.

PYE PRO AMPLIFIERS

Thank you for purchasing this PYLE

Please complete warranty card, detach and return

Limited Warranty

All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.

Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return
Hotline at [phone] to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.

When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:

R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204

PT-2400 Amplifier

PT-2800 Amplifier

(if available)

warranty registration card

You must also include the following items with your return:

• A copy of your sales receipt or other proof of purchase

• A brief letter, indicating the problem you are experiencing

with the product

• Include in your letter your return address, daytime phone

number and R.A. number

• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.

Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.

Owner’s Manual

www.pyleaudio.com

Your New Pyle Pro PT series P.A.
Amplifier gives you the power and
versatility you need in a professional
sound system.
The amplifier's wide frequency
response makes it suitable for
amplifying music or vocal program
material. It can be used for live bands,
office paging systems, public
announcements, or a variety of other
installations.

Please read this manual throughly before you attempt to set up and use the am plifier. It contains a
range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you
can expect years of trouble-free service from this product.

TABLE OF CONTENTS

1 Features and Controls
2 Installation Guidelines
2 Input Connections
2 Connecting a CD or tape player or tuner
2 Connecting an equalizer or signal processor
2 Stereo or Mono Inputs
2 Speaker connecitons
3 Bridged Mode Operation
3 Using headphones
3 Connecting to standard AC power
3 Mounting the amplifier
3 Turning the amplifier on
3 Using the power meter
3 Using the left and right output level controls
3 About the internal clip circuitry
3 Using the A/B Speaker Selector Switch
3 Caring for your Pyle Pro Amplifier
3 Replacing a fuse
4 Specifications
5 Limited warranty

FEATURES AND CONTROLS

REAR PANEL, PT-2400/ PT-2800

Stereo/Mono Switch

Lets you select bridged mono input
mode in combination with a mono
signal source plugged into the LEFT
input channel, or conventional
stereo operation with a stereo input
signal.

Speaker Terminals

Permit hook up of two stereo pair of
speakers via the wire terminals.
You can choose either Channel A , Channel
B, or use both at the same time.
Speaker impedance can range from 4 to 16
Ohms.

FEATURES AND CONTROLS

FRONT PANEL, PT-2400/ PT-2800

Phone Jack

Lets you connect a pair of stereo
headphones for private listening or cueing
(monitoring) sound prior to "airing" it.

Left Output Level Controls

Lets you adjust the sound levels of left
channel.
In the mono bridged mode, only the left
gain control will adjust the output level.

Protection Circuit and Indicator

The indicator will be illuminated when the amplifier is
powered on and at turn-on delay status; the indicator will
be turned off after internal outputs are connected. The
indicator will also be illuminated when the amplifier has
abnormal problems, such as overload or excessive heat.

Left and Right Power Meters

Indicate the output signal level for each channel.

Right Output Level Controls

Lets you adjust the sound levels of right
channel.

Clip Circuit and Indicator

This special circuitry protects the amplifier and
speaker system from being damaged by overdriving
power levels. Indicator lights remind the user to
reduce the volume when amplifier output is
excessive.

Speaker A/B Selector Switches

Permit you to select speakers attached to terminal
set A, set B, or both.

Input Jacks

Let you connect a variety of audio input
sources via the balanced (XLR/6.35mm
phone jack combinations) or unbalanced
(RCA) inputs.

Fan Cooling

Cooling system is automatically activated
whenever amplifier is turned on. This forced
air cooling system rapidly exhausts interior
heat, reducing operating temperature and
aiding performance.

Mono Bridged Output

Connect the speaker's positive (+)
to the amplifier's LEFT/RED (+)
terminal and negative (-) to the
amplifeir's RIGHT/RED (+) terminal.

Switched AC Accessory Outlet

There is supplied AC OUTLET
(SWITCHED MAX. 300W) which allow
the electrical hook up of other units.

Voltage Switch

The amplifier has selectable input voltage from 110V/60Hz which is
the standard in USA and CANADA. You can also switch the input voltage
to 220V/50Hz for EUROPEAN operation. Please make sure the switch
is in the proper position before operating, otherwise severe damage
will result not cover by the warranty. Please also replace the fuse with
proper rating in this situation (see the SPECIFICATIONS for the fuse
rating).

PYLE PRO PT-2400/2800 Amplifier Owner’s Manual

PYLE PRO PT-2400/2800 Amplifier Owner’s Manual – 1