PYLE Audio PT2000, PT1200, PT1600 User Manual

Amplifier Specifications

Input Impedance

Continuous Output Power

PT2000 PT1600 PT1200

20 k-Ohms

20 k-Ohms

20 k-Ohms

Stereo Mode

20 Hz to 20 kHz, 8 Ohms
1 kHz, 4 Ohms
Maximum Power, 4 Ohms

Bridged Mode

20 Hz to 20 kHz, 8 Ohms
1 kHz, 4 Ohms
Maximum Power, 4 Ohms

THD at rated output power

Frequency Response +/–3dB

Input Sensitivity for rated output power

Signal-to-Noise Ratio A-Weighted

Speaker Impedance

A or B only
A plus B
Bridged Mode

Power Requirement

Power Fuse

Dimensions

(mm)

HxWxD,inches

Weight, lbs (kg)

120W x 2
175W x 2

1000W x 2

300W x 1
350W x 1

2000W x 1

0.1%

10 Hz to 50 kHz

0.775V

90 dB

4-16 Ohms
8-16 Ohms
8-16 Ohms

120 VAC, 60 Hz

7A/250V

5

1/8 x19x12

(130 x 482 x 305)

28.19 (12.8)

100W x 2
140W x 2
800W x 2

250W x 1
280W x 1

1600W x 1

0.1%

10 Hz to 50 kHz

0.775V

90 dB

4-16 Ohms
8-16 Ohms
8-16 Ohms

120 VAC, 60 Hz

6A/250V

4 15/32 x187/8 x12

(114 x 480 x 305)

24.67 (11.2)

70Wx2
100W x 2
600W x 2

150W x 1
200W x 1

1200W x 1

0.1%

10 Hz to 50 kHz

0.775V

90 dB

4-16 Ohms
8-16 Ohms
8-16 Ohms

120 VAC, 60 Hz

5A/250V

4 3/16 x1815/16 x103/4

(100 x 482 x 273)

19.82 (9.0)

Purchased at:

Catalog Merchandiser

Music Products Store

Other

Sound Contractor/Installer Mail Order

Date of Purchase

Model No. Serial #

(if available)

City, State ZIP

Name

Address

product. To activate your

warranty, please mail this card

within 10 days.

PYE PRO AMPLIFIERS

warranty registration card

Thank you for purchasing this PYLE

Please complete warranty card, detach and return

Limited Warranty

All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.

Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return
Hotline at [phone] to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.

When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:

R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204

You must also include the following items with your return:

• A copy of your sales receipt or other proof of purchase

• A brief letter, indicating the problem you are experiencing

with the product

• Include in your letter your return address, daytime phone

number and R.A. number

• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.

Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.

PT2000 Amplifier

PT1600 Amplifier

PT1200 Amplifier

Owner’s Manual

Your new Pyle Pro PT Series P.A.
Amplifier gives you the power and
versatility you need in a professional
sound system. The amplifier’s wide
frequency response makes it suitable
for amplifying music or vocal program
material. It can be used for live bands,
office paging systems, public
annoucement systems, or a variety of
other installations.

TABLE OF CONTENTS

1

Features and controls, PT2000 and PT1600

2

Features and controls, PT1200

3

Installation Guidelines

3

Input Connections

3

Connecting a CD or tape player or tuner

3

Connecting an additional CD sound source

3

Connecting an equalizer or signal processor

3

Connecting microphones

3

Speaker connections

3

Connector options

4

Bridged Mode Operation

4

Using headphones

4

Connecting to AC power

4

Mounting the amplifier

4

Turning the amplifier on

4

Using the power meter (PT2000 and PT1600 only)

4

Using the meter range selector (PT2000 and PT1600 only)

5

Using the left and right output level controls

5

About the internal clip circuitry

5

Using the A/B Speaker Selector

5

Caring for your Pyle Pro Amplifier

5

Replacing a fuse

6

Specifications

6

Limited warranty

FEATURES AND CONTROLS

Left and Right Power Meters

Indicates the output signal level
for each channel

FRONT PANEL, PT1600

Meter Range Switch

Controls the sensitivity
of the power meter

Clip Circuit and Indicator

This special circuitry protects the amplifier and
speaker system from being damaged by overdriving
power levels. Indicator lights remind the user to
reduce the volume when amplifier output is excessive.

Please read this manual thoroughly before you attempt to set up and use the amplifier. It contains a range of
installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of
trouble-free service from this product.

FEATURES AND CONTROLS

Meter Range Switch

Controls the sensitivity
of the power meter

FRONT PANEL, PT2000

Power On/Off

Phone Jack

Lets you connect a pair of stereo headphones

Left and Right Output Level Controls

Lets you adjust the sound levels for each channel
for private listening or cueing (monitoring)
sound prior to “airing” it.

Speaker A/B Selector Switches

Permits you to select speakers
attached to terminal set A, set B or
both.

Left and Right Power Meters

Indicates the output signal level
for each channel

Clip Circuit and Indicator

This special circuitry protects the
amplifier and speaker system
from being damaged by
overdriving power levels.
Indicator lights remind the user
to reduce the volume when
amplifier output is excessive.

Power On/Off

Left and Right Output Level Controls

Lets you adjust the sound levels for each channel

REAR PANEL, PT2000 and PT1600

STEREO

MONO

GND

INPUT

RL

MONO

RL

1

2

Stereo/Mono Selector

Lets you select bridged mono input
mode in combination with a mono
signal source plugged into the Left
channel, or conventional stereo
operation with a stereo input signal.

Input Jacks

Lets you connect a variety of audio input sources
via the balanced (XLR/6.35mm phone jack
combinations) or unbalanced (RCA) inputs.

Phone Jack

Lets you connect a pair of stereo
headphones for private listening or
cueing (monitoring) sound prior to
“airing” it.

Speaker A/B Selector Switches

Permits you to select speakers
attached to terminal set A, set B or
both.

RL

RIGHT LEFT

A

–+

B

MONO

++––

SPEAKER

Speaker terminals

Permits hookup of two
stereo pairs of speakers
via the wire terminals.
Speaker pair A can also
be connected via the

6.35 mm phone jacks
provided.

Fan Cooling

Cooling system is automatically activated whenever amplifier
is turned on. This forced air cooling system rapidly exhausts
interior heat, reducing operating temperature and aiding
performance.

FUSE

VOLTAGE

AC OUTLET

AC Outlet

This switched outlet allows
the electrical hookup of
other units, with maximum
load of 300W.

PYLE PRO PT2000/1600/1200 Amplifier Owner’s Manual

PYLE PRO PT2000/1600/1200 Amplifier Owner’s Manual – 1