PYLE Audio Discojam 2, PSUFM1070P User Manual

PSUFM1070P

PSUFM1070P

www.PyleAudio.com

Specifications

6.Protect the unit from moisture or rain.

5.Keep the unit in a well ventilated environment and keep away
from, direct sunlight to prevent unit from overheating.

4.Don't use volatile or dangerous chemical cleaners on the unit
(like toluene, alcohol, gasoline etc.) Use gentle cleaners.

3.Do not open chassis! Extermely dangerous! Do not put your hands
inside the chassis. If the device begins to malfunction do not
attempt to repair, unplug the unit and contact Pyle immediately.

2.Carfully handle, plug and unplug the power cable when handling.
Hold the plug with a firm grip and when plugging or unplugging from
sockets.

1.Correct power must be used to operate this unit properly,
do not use any other powering options, cords or methods.

Safety Notes

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

Dual 10" Woofers and Two 3" Piezo Tweeters
Heavy Duty Handles for Easy Portability
Three Color Flashing DJ lights on Tweeters and Woofers
LED Sound Level Indicators
Works with Most Amplifiers or With The Disco Jam Active Models
Speaker Spring Terminals
Ported Enclosure for Added Bass Response
Power Handling: 1500 watts peak /750 Watt RMS @4 Ohms
Woofer Magnet Weight: 25 oz.
Sensitivity (1w/1m): 90dB
Built In Crossover Network: 3.5k Hz
Frequency Response: 20 Hz - 20 kHz
35mm Speaker Stand Mount
Dimensions: 36.8"(H) x 15.2"(W) x 13.6"(D)
Weight: 32 lbs