PYLE Audio PS-PTR19 Operating Instructions

PyleAudio.com

Multi-Function Wrist Watch

Model: PSPTR19

REMINDER

GETTING STARTED

Prior to your purchase of the watch, the watch is switched off for energy saving purposes, and you can turn it on by pressing the MODE key. For energy saving purposes, the watch unit will switch off automatically at midnight. Press the MODE key to turn it on.

PEDOMETER & SLEEPING MONITOR

The watch comes with 2 major activity function:- PEDOMETER & SLEEPING MONITOR. Only one function can be used at any one time. Normally, the watch will operate under the pedometer mode unless the sleeping monitor has been activated. It will return to pedometer function once the sleeping monitor mode has been stopped.

There maybe a delay between the start of your walk and the counting of steps. movements outside of a normal walking motion. Once the watch has recognized your walking activity, it will take into account the initial steps taken during the delay.

NOTE

If the watch is inactive for longer than 1 minute in any modes, the main screen will automatically return to time mode.

personal data in user settings mode.

- All functions with the exception of time mode, will be inactive, the sleeping monitor data must be (saved/deleted), to resume access to all functions.

detection of continuous steps.

- Whilst the sleeping mode is on, all modes cannot be accessed with the exception of time mode & alarm mode, or until the sleeping record has been completed (saved/deleted).

SHAKE IT TO WAKE IT!

Shake the watch to turn on the EL backlight. At default, this function will turn ON automatically at 18:00 and off at 08:00, hold the ST/SP/+ button for 3 seconds during Time Mode to activate or deactivate this function. Frequent usage of the ‘SHAKE IT TO WAKE’ function, will shorten the battery life of the product. We recommend all users to turn off this function whilst undergoing exercise.

2 3 4

y, and exclude

ACTIVITY MODE

Hold the ACT/EL button for 2 seconds to enter the activity mode.

PERSONAL TRAINER

Thank you for choosing X-Tracker as your personal trainer. We want you to make the most out of your new gadget, so please read the instruction manual carefully, and keep the manual for future reference.

Important:

Please note that the watch is NOT a medical device and is not to be used as such. The X-Tracker requires one CR2032 lithium battery. Only the recommended

batteries are to be used. When replacing the batteries, the following are to be strictly observed.

1. Only the recommended batteries are to be used.

2. Only adults should install and replace the batteries.

3. DO NOT use rechargeable batteries, and DO NOT recharge non rechargeable batteries.

INSTALLING THE BATTERY

1. The battery compartments are located at the back of the watch.

2. To install or replace the battery, unscrew the back cover carefully.

3. Take out the old batteries and dispose responsibly.

4. Gently place a new battery into the battery slot of the battery compartment, making sure that the poles are correctly placed, and screw the back cover on.

3D SENSOR - MEASURES YOUR MOVEMENT ACCURATELY

The 3D technology uses an accelerometer sensor that detects and measures only count steps after an initial detection of continuous steps.

SCREW

BACKCOVER

ORing

CR2032 BATTERY

THIS DEVICE IS OPERATED BY FOUR KEYS:

– MODE / SET

– RESET / DOWN

– START / STOP / UP

ACT/EL – ACTIVITY / EL BACK LIGHT

Press all 4 buttons at the same time to reset the watch.

CONTENTS

Getting Start ……………………………………………………………………… Important Battery Information ………………………………………………….. Installing the Battery…………………………………………….………….…… Using the watch function…………………………………………………...…… Symbol on LCD……………………………………………………………...…… Mode Flow Chart…………………………………………………………….…… Time Mode ………………………………………………………………….……

Setting Time ….……………………………….………………………........……

Alarm Mode………………………………………………………………….…… Setting Alarm …….………………………………………………………….……

Stopwatch Mode …………………………………………………………....……

Step Counting Mode ………………………………………………………..……

Sleeping Mode …..…………………………………………………….......……

Indication of the sleeping quality………………….…………………….....……

Memory Mode…………………………………………………..…………...…… User Setting Mode……………………………………………………….….…… Activity Mode.………………………………………………………………..……

Caution……………………………………………………………………….……

2 3 3 5 6 6 6 6 8 8 8 9 9 11 12 13 15 16 16

USING THE WATCH I

MPORTANT! saving purposes, and you can turn it on by pressing the MODE key. midnight (00.00/12.00am). Press the MODE key to turn it on.

The watch comes with 2 major activity function:- PEDOMETER & SLEEPING MONITOR. Only one function can be used at any one time. Normally, the watch will operate under the pedometer mode, unless the sleeping monitor has been activated. It will go back to pedometer function once the sleeping monitor mode has been deactivated (Saved/Deleted).

screen will automatically return to time mode. please wear the watch properly as shown in the diagram (strap of the watch

must fasten tightly around the wrist and it must not be loose; display must also be perpendicular to the forearm and wrist; the watch must only be worn on the left wrist and not the right to maximize the accuracy of step counting) as the design and accuracy of the watch for step counting is based on the positioning of the watch. By wearing the watch correctly, the steps counted during the walk will be more accurate.

SHAKE IT TO WAKE IT!

Shake the watch to turn on the EL backlight. At default, this function will turn ON automatically at 18:00 and off at 08:00, and you can hold the ST/SP/+ button for 2 seconds during Time Mode to activate or deactivate this function.

f for energy

ff automatically at

y, and exclude

UNDERSTANDING THE SYMBOLS

A - Time from 0:00.00 to 11:59.59 P - Time from12:00.00 to 23:59.59

- Alarm On

- Chime

- Sleeping Mode

- Step Mode (Step you have walked)

- Shake The Watch

- Low Battery Detection

- Key Tone

KM - Kilometers MI - Miles CM - Centimeters KG - Kilograms LB - Pounds Kcal - Unit of Calories Burnt

- Exercise Time

MODE FLOW CHART

Press MODE button to scroll through the different modes. TIME MODE – ALARM MODE – STOPWATCH MODE – STEP COUNTING

MODE – SLEEPING MODE – MEMORY MODE – USER SETTING MODE

TIME MODE

1. Press the MODE button to scroll through the menu until you locate the time mode, “ TIME ”.

2. Press ST/SP/+ button to view the Date.

3. Press RE/- button to toggle the Day and Seconds.

123

SETTING TIME

1. Hold the MODE button for 3 seconds to enter setting mode.

2. Press ST/SP/+ button to toggle 12Hr or 24Hr.

3. Press MODE button to set seconds.

65 7 8

4. Press ST/SP/+ button to reset zero.

5. Press MODE button to set minutes.

6. Press or hold either the ST/SP/+ button to increment the minutes’ digits or RE/ - button to decrement the number.

7. Press MODE button to set the hour.

8. Press or hold either the ST/SP/+ button to increment the hours’ digits or RE/ - button to decrement the number.

9. Press MODE button to set the date.

10. Press or hold either the ST/SP/+ button to increment the date’s digits or RE/ - button to decrement the number.

11. Press MODE button to set the month.

12. Press or hold either the ST/SP/+ button to increment the month’s digits or RE/ - button to decrement the number.

13. Press MODE button to set the year.

14. Press or hold either the ST/SP/+ button to increment the year’s digits or RE/ - button to decrement the number.

15. To save and exit setting mode, hold the MODE button for 3 seconds or alternatively, one minute of inactivity will trigger the watch to return to the default TIME mode.

Note:

- Any changes in the hour and minute settings will reset the seconds to zero.

- Press the RE/ - button in Time mode to toggle between day and seconds.

- In the 24 Hour Format, the ‘Shake to Wake’ function automatically activates at 18:00 and then deactivates at 8:00. Hold the ST/SP/+ button for 3 secs. during Time Mode to activate/deactivate this feature.

ALARM MODE

1. Press the MODE button to scroll through the menu until you locate the alarm mode, “ ALARM ”.

2. Press ST/SP/+ button to activate or deactivate the alarm.

3. Press RE/ - button to activate or deactivate the hourly chime.

SETTING ALARM

1. Hold the MODE button for 3 seconds to set the alarm, and the minutes’

2. Press or hold either the ST/SP/+ button to increment the minutes’ digit or RE/ - button to decrement the value.

and the hours’

4. Press or hold either the ST/SP/+ button to increment. the hours’ digit or RE/ - button to decrement the value.

5. To save and exit setting mode, hold the MODE button for 3 seconds or alternatively, one minute of inactivity will trigger the watch to return to the default TIME mode.

Notes

- Any changes made in the alarm mode will automatically enable the alarm.

- If the watch is inactive for longer than 1 minute in any modes, the main screen will automatically return to time mode.

STOPWATCH MODE

1. Press the MODE button to scroll through the menu until you locate the stopwatch mode, “ STW ”.

2. Press ST/SP/+ button to start the stopwatch, and press again to stop the stopwatch.

3. Hold the RE/ - button for 3 seconds to reset the stopwatch to zero.

Note:

If the stopwatch is not running and the watch is inactive for longer than 1

minute in any modes, the main screen will automatically return to time mode. will be 3 beeps, and the stopwatch will stop automatically.

While the stopwatch is running, press RE/ - button to view the current time, and

it will automatically return to stopwatch mode after 3 seconds.

STEP COUNTING MODE

locate the pedometer mode displaying “ ”.

3. Press RE/ - button to browse through the sleep statistics or wait 3 seconds

4. Hold the RE/ - button for 3 seconds to save or delete the record, and the display will show “

6. Hold the RE/ - button for 3 seconds to confirm, and it will display either “

” for saved data or “ DEL ” for deleted data, and return to the

”, followed by “ ”.

” or “ NO ”.

MEMORY MODE

memory mode displaying “ ”. RE

Step counting record

a. Press RE/ -

PEDO

Note:

If no steps or waking movements can be detected for 60 seconds, it will

return to Time mode automatically.

SLEEPING MODE

mode displaying “ ”.

USER SETTING MODE

will show “ GENDER ”.

units.

RE/ - button to decrement the value.

digit or RE/ - button to decrement the value.

RE/ - button to decrement the value.

mode.

Note:

If the watch is inactive for longer than 1 minute in any modes, the main

screen will automatically return to time mode.

Note:

then hold the RE/ - button to save or delete the record.

Whilst the sleeping mode is on, all modes cannot be accessed with the

When sleep monitor is activated, press RE/ - button to view the current time,

and it will automatically return to sleep monitor after 3 seconds.

Whilst using sleeping mode, if the user does not activate the function within

60 seconds, the watch will automatically return to the default time mode. to save or delete data is detected, the watch will automatically return to the

default time mode in 30 minutes.

109 11 12

INDICATION OF THE SLEEPING QUALITY

Note:

movement.

ACTIVITY MODE

the ACT/EL button again, to select the activity.

Hiking

digit will flash. reached your desired month.

6. Press RE/- button to decrement the value or hold it until you have reached your desired month.

your desired day.

9. Press RE/- button to decrement the value or hold it until you have reached your desired day.

will automatically enable the watch to return to time mode. All data will be saved.

Sleeping record

a. Press RE/ -

Note:

will show “ CLR ALL ”. memory at the selected record mode and the display will show “ CLEAR ”. will be erased should the memory be full.

SPECIFICATIONS:

12/24 hours

CAUTION :

reset the watch by pressing all four buttons together. All data previously input into the device will be erased and you will need to re-enter your

and follow all the necessary steps, to input all personal data again.The contents illustration limitations, the displays shown in this manual may differ from the

actual product display. The manufacturer and its suppliers hold no responsibility to you or any other parties for any damages, lost-profits, or any other claims arisen by using this product. The contents of this manual may NOT be reproduced without the permission of the manufacturer.

13 14

73-271-0002